Zaber Technologies Products

Zaber introduces X-LRT-AEC Series of computer-controlled, motorized linear stages

  • Zaber Technologies

An integrated linear encoder combined with stage calibration provides high accuracy positioning over the full travel of the device. Devices have low pitch, roll, yaw, and runout and a long lifetime.

Zaber introduces X-GSR-E Series motorized goniometers

  • Zaber Technologies

The built-in motor encoder allows closed-loop operation and slip/stall recovery features. An indexed knob provides manual control for operation even without a computer

Zaber releases X-MCA stepper motor controller

  • Zaber Technologies

It has been designed to fit in tight spaces and provide a range of mounting options including 90 degree stacking and 35 mm DIN rail mounting via optional accessories AB158 and AB159.

Zaber releases X-VSR-SV Series vacuum compatible vertical lift stages

  • Zaber Technologies

Four feedthrough wires are required to control all devices in the daisy-chain via serial port. These stages are vacuum compatible in high vacuum (10-6 Torr) or low vacuum (10-3 Torr).

Zaber introduces LSA-V Series of vacuum compatible miniature linear stages

  • Zaber Technologies

Zaber devices allow daisy-chaining in a vacuum chamber, decreasing cables and clutter. Only four feedthrough wires are required to control all devices in the daisy-chain via serial port.

Zaber releases X-RSW-SV Series vacuum compatible rotary stages with built-in controllers

  • Zaber Technologies

The integrated stepper motor controller and motor driver allows for control, and the worm gear allows for continuous rotation. Zaber devices allow daisy-chaining in a vacuum chamber.

Zaber introduces X-LSM-SV vacuum compatible linear stages

  • Zaber Technologies

The X-LSM-SV is designed with vacuum compatible materials to minimize outgassing and allow for faster pump down times. Zaber devices allow daisy-chaining in a vacuum chamber, decreasing cables and clutter.

Zaber introduces X-LRQ-SV Series of linear stages

  • Zaber Technologies

With a profile of 36 mm, the stage design allows speeds up to 205 mm/s and loads up to 100 kg. These stages are vacuum compatible in high vacuum (10-6 torr) or low vacuum (10-3 torr).

Zaber announces X-LRM-DE Series of linear stages

  • Zaber Technologies

These stages are designed for multi-axis configurations or applications where stability under cantilever loads is required.

Zaber introduces GSM motorized goniometers

  • Zaber Technologies

Designed to interface with Zaber’s X-MCB1 and X-MCB2 controllers, this device is available in two stackable sizes with 40 and 60 mm centre of rotation options