AutomationDirect Operator Consoles and Consolets

  • January 17, 2020
  • AutomationDirect
  • AutomationDirect
AutomationDirect Operator Consoles and Consolets
AutomationDirect Operator Consoles and Consolets

Designed to house electrical and electronic controls, instruments and components. Heavy duty construction provides protection from dirt, dust, oil and water. AutomationDirect offers the following types of NEMA 12 operator consoles, consolets and accessories:

  • W1C Series - Single-Door Freestanding ConsolesPushbuttons, pilot lights, meters, switches, etc. can be mounted on sloping control surfaces. Interior components can be mounted on standard subpanel. Made from 14-gauge steel. 3-point keylocking handle is provided on front, main door. Main door on console is raised.
  • WC9 Series - Single-Door Consolets with Optional Sub-panelsMade from 14-gauge steel. Sloping front control panel provides an ideal surface for mounting pushbuttons, pilot lights, meters and switches. Interior components can be mounted on panels located on the sides and back of the enclosure. Collar studs are provided for mounting one, two or three optional panels.
  • WC10 Series - Single-Door Consoles with Optional TopMade from 14-gauge steel. Pushbuttons, pilot lights, meters, switches, etc. can be mounted on sloping control surfaces. Interior components can be mounted on subpanel and terminal straps. 3-point keylocking handle is provided on front, main door. Writing desks are removable and attach easily to console front.
  • WC12 Series - Two-Door Consoles with Optional TopPushbuttons, pilot lights, meters, switches, etc. can be mounted on sloping control surfaces. Interior components can be mounted on subpanel and terminal straps. Made from 14-gauge steel. Double overlapping doors are provided on two door consoles. Writing desks are removable and attach easily to console front.
  • WC14 Series - Single-Door Consoles with Optional Top and Sub-panelPushbuttons, pilot lights, meters, switches, etc., can be mounted on the instrument panel. Interior components are motorized on stationary sub panels, swing-out sub panels or relay rack angles (panels are optional). Made from 14-gauge steel. Horizontal channels are welded to sides of console to support optional panels and swing-out panels on door consoles. Half, full and swing panels are optional. Optional rack angles (set of 2) must be ordered separately. These are standard fit for a 19” rack in WC14B. Writing desks are removable and attach easily to console front.
  • WC-C Series - Consolets with Sloping CoverMade of 14-gauge steel. Consolets provide protection from dirt, dust, oil and water. Control panel is continuously hinged along bottom edge. Flexible design allows for mounting on either of two sides, creating control surfaces of 30 degrees or 60 degrees. Consolets can be mounted on desktops, pedestals, or other flat surfaces.
  • WA Series - Consolet Columns and BasesDesigned to permit floor mounting of many types of enclosures and boxes. Four column and two base sizes are available. Columns can be mounted on either base. Wiring connections can be made through the base, through the vertical column, or directly to the enclosure. Columns have flanges at each end and a gasketed access plate. Columns are fabricated from 14-gauge steel with 10-gauge flanges. Screws, oil-resistant gaskets, and box connector fitting are furnished with each column for joining an enclosure to the top of the column. A cutout must be made in the enclosure if the wires are to come through the column. 18” bases are fabricated from 10-gauge steel. 24” bases are fabricated from 7-gauge steel. Both bases have added reinforcing, leveling screws and holes for securing to floor.
  • Sub-panels for NEMA Consoles and ConsoletsSubpanels are not included with enclosures and must be purchased separately. Sub-panels, center panels and swing-out racks provided include the following: * NP Series - Subpanels for NEMA 1, 4, 4X, 4/12 and 12 wall mount enclosures * WC10, WC12 and WC14 Series - Tops, rack angles and writing desks. Optional tops and writing desks are available for several of the operator console units. The rack angle fits in all WC series consoles, but provides standard rack hole spacing for only the WC14B model.
AutomationDirect offers thousands of industrial automation products through its Online Superstore and 1,900-page catalog. Products include Programmable Logic Controllers (PLCs), AC drives/motors, operator interface panels/HMI, motor controls, DC power supplies, push buttons, sensors, NEMA electrical enclosures, wire duct and more. The company offers high-quality automation products at incredible prices, along with detailed documentation and superior sales and technical support. Same-day shipping on in-stock items ordered by 4 p.m. ET is standard. A 30-day, money-back guarantee is offered on most items, including software.Select the process controls and industrial wiring supplies you need from over 6,000 quality products, often priced well below the industry average. To request a free catalog, visit their Web site or call 800-633-0405.Request More Information

Go to AutomationDirect website
Go to AutomationDirect website
Learn More