- April 26, 2018
April 26, 2018 - JVL Industri Elektronik A/S and stepper motors introduce a new stepper motor. The ServoStep integrated stepper motor series MIS171 to MIS176 have a NEMA 17 42x42 mm flange and include controller with 6 different industrial Ethernet protocols, absolute multiturn encoder, closed loop and M12 connectors. This motor family is based on the latest microprocessor and cooling technology and an advancement compared to previous designs.
All the necessary electronics in a stepper system are integrated in the motor itself and are similar to the concept used by other JVL motors.
The motor contains everything needed to solve a modern control task, either as a stand-alone with own programmable motion controller or controlled from an external PLC or PC. 8 I/O points can be individually configured as digital input, digital output or analogue input. Modbus RTU or CANopen provide connections to a PLC or HMI. An ActiveX/OCX driver is available to make interfaces to LabView, Excel, VB or other Windows-programs. Up to 254 axis can be connected on the same RS485 bus.
- Industrial Ethernet. 6 Protocols
- Closed-loop operation with current control
- Absolute multiturn encoder
- 409600 cnt/rev.
- Speed 0-3000 in 0.01RPM steps
- Protection class up to IP67
- M12 or M23 connectors
- MIS171 with 0,15 Nm, length 70,5 mm. 5mm shaft
- MIS173 with 0,26 Nm, length 83,5 mm. 5 or 6,35mm shaft
- MIS176 with 0,80 Nm, length 104,3 mm. 8 mm shaft
The motors can be operated as stand-alone units or controlled from a PLC or PC. The 8 I/Os can be individually configured as digital input, digital output or analog input. As standard, it is possible to communicate with holistic systems via for example Modbus RTU or CANopen. The MAC motor standard protocol that is also supported makes it possible to connect up to 254 other JVL integrated motors. The MIS17 series allows connectivity to all industrial Ethernet interfaces such as Profinet, EtherCAT, Powerlink, EtherNet/IP, Modbus TCP and SERCOS III.