- August 08, 2012
August 8, 2012 - ASM announces WB100M tape sensor for offshore conditions. Oil platforms, shipyards, construction and offshore engineering companies all have special requirements for sensors that can meet the tough and harsh environments that they have to work in. WB100M tape sensor is highly resistant to shock and operational to IP68/69K in sea water. The POSITAPE series of sensors exceeds all expectations when used in areas of difficult access and pulley wheels are used to change the direction of the tape route. On conventional draw wire sensors the use of these pulleys can considerably reduce the life of the draw wire. But with the POSITAPE range, the stainless steel measurement tape will have at least double the life compared to that of a measurement cable under identical operating conditions. Developed primarily for offshore oil drilling rigs and outdoor applications, the WB100M is well suited to wet, harsh applications often found in dock sites such as cranes and ramp positions or even sluice gates found on inland waterway systems. The fully encapsulated electronics ensure that no moisture can penetrate the critical areas where as water is allowed to freely flow through the mechanical areas with no effect due to the use of materials specifically selected to work well in a salt water environment, resulting in the IP68/69K enclosure ratings. The WB100M is available in a range of measuring lengths from 2000mm up to 10000mm and a wide range of analog or digital outputs including CAN SAE J1939. The linearity of the WB100M is rated up to ± 0.05% full scale.