- December 08, 2010
December 8, 2010 - Deeter's Liquid Volume Dispenser is for use in laboratories, shops and small volume production applications. The Liquid Volume Dispenser will deliver a measured volume of liquid at the press of a button. The operator selects a volume, presses a button and the Liquid Volume Dispenser delivers the required volume without further operator intervention. The volume is easy to select and is retained in non-volatile memory for repeat operation. Volumes between 0.10 liters and 100.00 liters can be selected in increments of 0.01 liters. The Dispenser will accurately measure volumes over a flow rate range of between 0.6 liters/minute and 5 liters/minute.The Liquid Volume Dispenser has two John Guest Speedfit push-fit connectors for fluid in and out. These take a tube with outside diameter of 8mm. Wetted surfaces are nylon, PTFE, Buna and acetal, making the Liquid Volume Dispenser suitable for a wide range of fluids.Operator controls consist of a three-button keypad and a liquid crystal display.The display shows the selected volume and progress during dispensing. A number of additional features are available through the keypad, including pause and restart during dispensing, cancelling dispensing, and manual 'top-up'control.An audio 'beep' option is provided to indicate when dispensing has stopped. Another audio option will produce 'beeps' if the flow rate is outside the limits for The Liquid Volume Dispenser. These audio options can be enabled or disabled through a display menu and are saved to non-volatile memory, so they are restored to the operators preference after power-up.The Liquid Volume Dispenser has a USB communications interface for connection to a PC. All keypad controls can be performed by a computer, with progress and status information passed back to the computer for display. The Liquid Volume Dispenser is powered by a low-voltage supply, making it safe to use if liquid is spilled. A 12VDC mains socket adapter is supplied with each dispenser.