- February 28, 2011
- Sensorex
February 28, 2011 - Sensorex expands S600 Series pH/ORP Sensors with the S651CD Submersible Electrode and S656CD Insertion Electrode. S651CD Submersible Electrode The S651CD submersible sensor is an upgrade to the original S650CD electrode and can be used in place of the S650CD and S650CDHT. The S651CD submersion pH/ORP electrode is designed for measurements in tanks, flumes and sewer lines, in addition to other applications with high suspended solids, where flocculation operations require low velocities and in tanks with high agitation. It features a quick disconnect design for lower operating costs, a flat surface to resist coating and the option to be mounted at a 45 degree angle facing into the flow to further increase scrubbing action across the measured surface. The S651CD Sensor is available in CPVC and with or without ATC Elements. The S651CD features a measurement range of 0-14 pH (0-12 pH without Na+error) at ±2000 mV for ORP measurement. The electrode operates at a minimum temperature of 50ºF (10ºC) for fast response timing up to 185ºF (85ºC) depending on the maximum pressure desired, which can be up to 80 psig. S656CD Insertion Mounted Electrode The S656CD insertion sensor is an upgrade to the S656CD electrode and can be used in place of the S655CD, S655CDHT and 970283 models. Like the S651CD, the new S656CD features standard HT gels and reduced breakage potential. The S656CD features an insertion assembly, allowing pH measurements to be made in pressurized tanks and main lines without shutting down the system for electrode maintenance. It further reduces maintenance and cost-of-ownership with a quick disconnect design and the ability to be installed in seconds with no tools. The S656CD electrode features an adjustable insertion depth that allows it to be placed in a turbulent flow region to operate in self-cleaning mode. It is available in CPVC construction and with or without ATC Elements. The S656CD features a measurement range of 0-14 pH (0-12 pH without Na+ error) at ±2000 mV for ORP. The electrode operates a minimum temperature of 50ºF (10ºC) and up to 185ºF (85ºC) depending on the maximum pressure desired, which can be up to 80 psig.
Go to Sensorex website
Learn More