- December 05, 2007
December 5, 2007 - Endevco Corporation introduces the 7290D variable capacitance accelerometer with onboard, microprocessor-based temperature compensation. It is designed to provide very high thermal stability and global accuracy required for measurement of relatively low-level accelerations in laboratory test and measurement, automotive and aerospace applications including both military and commercial flight testing.Patented by Endevco, typical applications for the new model 7290D require measurement of whole body motion immediately after the accelerometer is subjected to a shock motion and in the presence of severe vibration inputs. Gas damping and internal over-range stops enable its anisotropically etched, silicon sensing element to withstand high shock and acceleration loads. The use of gas damping in the sensing element also results in very small thermally induced changes in frequency response.With its onboard, microprocessor-based temperature compensation, the model 7290D delivers 2.5% total dynamic accuracy over the entire military spec temperature range of -55ºC to +125ºC. Total dynamic accuracy is defined as the root of the sum of the squares of thermal sensitivity shift, non-linearity and hysteresis, and transverse sensitivity.Custom signal conditioning enables the model 7290D to operate with a nominal excitation of 8.0 Vdc to 30.0 Vdc and provides a high-level, low-impedance output. The ±2.25 V differential output (single-ended output optional) is DC coupled at a DC bias of approximately 2.5 V.In order to maintain stringent thermal characteristics and high accuracy, a custom ASIC provides factory programmable temperature compensation. All compensation and adjustments are incorporated within the accelerometer and no post-processing is required. The compensation is accomplished via a five-point, piecewise, linear fit algorithm for both thermal sensitivity shift (TSS) and thermal zero shift (TZS). A Transducer Electronic Data Sheet (TEDS) conforming to IEEE 1451.4 has been included to store serial number and calibration information.Endevco Corporation, a Meggitt group company, is one of the world's leading designers and manufacturers of dynamic instrumentation for vibration, shock and pressure measurement. The company's comprehensive line of piezoelectric, piezoresistive, Isotron and variable capacitance accelerometers are used to solve measurement problems in a wide variety of industries including aerospace, automotive, defense, medical, industrial and energy. Available products include pressure transducers, microphones, electronic instruments, and calibration systems. Founded in 1947 with headquarters in San Juan Capistrano, CA, Endevco has a global network of manufacturing and research facilities, sales offices and field engineers in the U.S., Europe and Asia. Meggitt PLC, headquartered in the UK, is an international group operating in North America, Europe and Asia. Known for its specialist extreme environment engineering, Meggitt is a world leader in aerospace, defense and electronic industries.