GF Piping Systems introduces Signet 9950 Dual Channel Transmitter (Gen 2b) | Automation.com

GF Piping Systems introduces Signet 9950 Dual Channel Transmitter (Gen 2b)

September 132018
GF Piping Systems introduces Signet 9950 Dual Channel Transmitter (Gen 2b)

September 13, 2018 – GF Piping Systems has added the Signet 9950 Dual Channel Transmitter (Gen 2b) to its flow and analytical instrumentation product line. The 9950 Gen2b adds functionality to its capabilities that enable multiple measurement readings in one transmitter.

With the setup of a transmitter and the versatility of a controller, the 9950 Gen 2b fully supports the Signet 2751 pH/ORP Smart Sensor Electronics for pH/ORP measurements.  Used together, they can transfer pH and ORP calibration data to the company’s 9900/2751, 9950/2751, or stand alone 2751 systems. Additionally, the 9950 Gen 2b automatically measures pH glass impedance, detects broken glass, and reads stored data in all Signet DryLoc pH and ORP electrodes.

Other features of the 9950 Gen 2b include support of two new plug-in modules – the Single Channel Direct Conductivity Module (3-9950.394-1) and the Dual 4 to 20 mA Current Loop Output Module (3-9950.398-2).

  • The 394-1 module is fully compatible with all Signet conductivity electrodes and can be used for conductivity/resistivity, and salinity measurements.  Plus, two single channel direct conductivity modules can be installed in a single 9950 transmitter.
  • The second module, the 398-2, expands the number of passive current loop outputs previously available from 2 to 6 for measurement flexibility.  Each current loop output can be set to the primary or secondary measurement of either channel, or to any of the derived functions.
     

MORE PRODUCTS

VIEW ALL

RELATED