ABB chooses Omnify PLM software to enhance design processes
March 28, 2017 - ABB is a company striving to write the future of industrial digitalization. ABB’s operations are organized into four global divisions, which in turn are made up of specific business units focused on particular industries and product categories. The Drives and Controls business unit, located in Finland, is dedicated to the manufacturing and marketing of low and medium voltage AC and DC drives. These drives provide a means to control the speed and torque of electrical motors.
Lack of an Electronic Component Information Management System
ABB Drives and Controls was lacking a component information management system with a centralized database for their Printed Circuit Board Assembly (PCBA) components and the mechanical parts that included PCBAs. Most part information was managed in Excel spreadsheets therefore centralized, electronic processes did not exist. They needed to establish collaboration among their hardware design teams with controlled processes to manage PCBA component Bill of Materials (BOMs) and Engineering Changes/ECOs, track part status (approve, maintain and phase out), gain “where used” visibility to easily identify component issues across multiple products, as well as make it easier to reuse components in new designs.
Reduce Time Spent Searching for Components
“We needed to implement a system to reduce the amount of time spent searching for components and to allow more time for designing products in order to improve quality and shorten the design cycle,” stated Tuomas Kemppainen, Design Engineer and Omnify Process Owner for ABB Drives and Controls.
The team at ABB Drives and Controls set out to find a solution that could share component information with their ECAD tool, Mentor Graphics PADS, in order to make it easier to update their component data, keep it accurate, and provide engineers with data to make better component selections without leaving their design environment. They also required that the solution properly manage and track component information for environmental compliance regulations such as Restriction of Hazardous Substances (RoHS), Waste Electronical and Electronic Equipment (WEEE), and material content.
Electronic Design Processes Improved Significantly
“We selected Omnify Empower PLM due to its solid integration with Mentor Graphics PADS, ease of use, and the fact that the system is designed from an electronic design point of view,” said Mr. Kemppainen.
ABB Drives and Controls now has a centralized component information management system where they can manage New Part Requests (NPRs), product documentation, BOMs, PCB Design Files, ECOs for electronics designs, environmental compliance data, and Vendor Part BOM costing. “Since implementing this system, it is very clear that all of our design processes related to the Omnify electronic component information system have improved significantly,” concluded Mr. Kemppainen.
MORE CASE STUDIES
EE Boost chooses C3DLabs' products for simulation software development
EE Boost chose C3D Labs’ line of products for the development of its simulation software of wave behavior in acoustic, elastic, electronic, and...
Korail Successfully Increased the Efficiency of Ticket Machines by Importing DFI’s COM Express
Since studies have shown that ticketing experience plays a vital part in customers’ perception of transit service quality, Korea Railroad...
Improve Mass Transit Service with DFI’s COM Express
As a national operator of railway lines, Korail recognized the need to improve its services due to
consumer demands and the modernization of mass...
Otto Motors helps GE enable lean manufacturing of medical equipment
GE Healthcare has reduced the size of its repair cell stations at the Repair Operations Center by 40%, much of which is due to the integration of...
Honeywell Process Solutions helps Pakistani refinery implement cleaner processes
The project’s Honeywell solutions will include licensing, basic engineering design and other associated services for a modular Penex...
What Production Data is Necessary to Drive Your Industry 4.0 Agenda?
By Mathew Daniel, Sciemetric Instruments
Data, data and more data. It’s the hot topic in manufacturing today with all the hype and anxiety...
ABB announces partnership with IBM to create industrial artificial intelligence solutions
The first two joint industry solutions powered by ABB Ability and Watson will bring real-time cognitive insights to the factory floor and smart grids.
MTA2017: Digitalized manufacturing technologies at the fore
The 300-exhibitor event provided a platform for companies to conduct business, and tap into the talent and experience from the industry community....
Emerging Efficiencies for Packaging Lines
By Tom Egan, PMMI, The Association for Packaging and Processing Technologies
Robotics, automatic labelers, smart packaging and digital printing...
Siemens and EPLAN announce synchronization of component datasets in online data portals
The EPLAN Data Portal is an online source of free device and component data for machinery and plant design. Downloads now exceed over one million...