Rotork wireless actuators control tank farm | Automation.com

Rotork wireless actuators control tank farm

Rotork wireless actuators control tank farm

April 4, 2013 - In 2011, an operating division of Martin Midstream Partners (MMLP) began building a single product tank farm at the Port of Corpus Christi, Texas, consisting of six 100,000 barrel tanks and four booster pumps to serve nearby truck and ship loading terminals.  Originally, the facility was designed for a single hydrocarbon product. The terminal’s original specifications did not require any automated valves to isolate the individual storage tanks.

During construction, MMLP decided to upgrade and introduce the capability to handle a second product, which necessitated the requirement of isolating the tanks to avoid cross-contamination.  To achieve this, MMLP specified Rotork electric valve actuation under centralised control. The explosion proof Rotork IQ non-intrusive intelligent actuators are monitored and controlled by a Rotork Pakscan P3 digital system, designed specifically for valve actuation duties and the environments associated with hazardous area petrochemical plants and storage areas. The Rotork system incorporates all appropriate interlocks which safeguard the integrity of the terminal operations.
 
For this project, MMLP has been able to take advantage of additional functionality and further economies through the introduction of Pakscan P3 with a wireless field network. Wireless Pakscan eliminates virtually all the costs associated with the installation of wiring, cable ducts, safety barriers and associated equipment required for network cabling, whilst enabling an increased level of information from the actuators to be communicated over the wireless network.

Chris Duke, Rotork’s lead service technician on the project, explains: “The customer didn’t want to add a lot of new conduit and wiring to control the actuators, so the wireless Pakscan system was a perfect fit.

“The installation consists of 16 Rotork IQ40 non-intrusive intelligent actuators, one Pakscan P3 wireless master station and three network repeaters, which are used to overcome radio black spots and ensure the redundancy of the network. As far as start-ups go, this was by far the easiest of any type of control system that I have seen.

“Some pre-commissioning of the wireless system was performed at the Rotork factory in Rochester prior to delivery and, once in the field, I installed the wireless antennas on each actuator and gave each unit its unique address. When this was done I powered up the master station and, as if by magic, all sixteen actuators populated the network within a few minutes. The customer was very impressed with the job done and how quickly everything came together.”

Following the success of this project, the same actuation and control system will be extended to three additional tanks to be built during the second phase of construction at this facility.

Martin Midstream Partners L.P.
Martin Midstream Partners L.P. (MMLP) is a publicly traded limited partnership with primary business lines focused on terminalling, storage, processing and packaging services for petroleum products and by-products encompassing natural gas liquids storage, marketing and distribution services and natural gas storage, sulphur and sulphur-based products processing, manufacturing, marketing and distribution and marine transportation services for petroleum products and by-products.  

Rotork Pakscan P3 wireless
First introduced in 2009, the Rotork Pakscan P3 wireless network control system is a further development of the Pakscan system used in thousands of plants throughout the world today. Simply stated, the system establishes a secure wireless mesh network that is used to control actuators and other field devices throughout the plant and to gather important operating data for asset management and preventative maintenance from the connected valve actuators.

The wireless system consists of three main hardware components:

A Pakscan P3 master station fitted with a wireless interface module, which is typically connected to the plant’s control system using industry-standard Modbus protocol over either a serial or Ethernet connection.

A Pakscan P3 wireless coordinator module, which can be mounted, either indoors or outdoors, up to 200 metres away from the P3 master station (further if standard fibre optic converters are employed) and which functions as the base station for the system’s robust mesh network.

A wireless actuator module installed on each actuator on the wireless network.

The wireless system operates on the license-free, globally recognised 2.4GHz ISM (Industrial Scientific and Medical) frequency band and has a line-of-site operating range between each device of approximately 30 metres indoors and 100 metres outdoors. Up to 60 actuators can mesh with a wireless coordinator.

In a Pakscan wireless mesh network, each actuator on the network can act as an independent router to help signals get to their intended destination. A correctly designed network will be configured to provide two or more paths between each actuator and the wireless coordinator. Therefore, if the normal traffic route is blocked or if a hardware or communication failure should occur, it can be overcome as the network dynamically determines an alternate route for the data to travel. This self-healing network mimics the loop-back capabilities of the established Pakscan two-wire loop.

In such a network, privacy and security are high priorities. To prevent unauthorised commands being sent to devices over the wireless network, all control data is encrypted using the Advanced Encryption Standard (AES).  Additional encryption is incorporated into the system to prevent unauthorised devices joining the network and to prevent a message replay attack.

The Pakscan P3 wireless network card gives the user access to all the standard control and monitoring features and data available from the wired Pakscan system, together with the diagnostic and asset management information stored as standard by Rotork IQ actuator data logger and configuration files, which is otherwise only downloadable locally, using the IQ hand held commissioning and communication tools. Using built-in web pages it allows easy extraction of these files from the control room over the wireless network.

MORE CASE STUDIES

VIEW ALL

RELATED