Siemens S7 Automation Maintenance 1 Course | July 24, 2017 8:30 AM - July 28, 2017 12:00 PM | Automation.com

Siemens S7 Automation Maintenance 1 Course

Event Summary

DATE:
July 24, 2017 - July 28, 2017
LOCATION:
Shreveport, LA 71103
START DATE/TIME:
July 24, 2017 8:30 AM
END DATE/TIME:
July 28, 2017 12:00 PM
EVENT TYPE:
Training
HOST:
Industrial Electronic Supply, Inc.
PHONE:
318-222-9459
EMAIL:
[email protected]
WEBSITE:
Click here to Visit

Description

Who should attend:
This course is the first of a two part series designed for maintainers and “first responders” to Siemens S7 automated control systems. Maintenance technicians, electricians, supervisors and others, who need to develop active skills using their Siemens Hardware system, should attend this course to maximize line uptime. This course also provides a great platform for those new to automation systems and state-of-the-art industrial electronics.

Prerequisites:
• A working knowledge of MS Windows
• Also suggested: Introduction to PLCs and Languages - Online Instructor-Led course (S7OILPLCI1B)
2.9 CEUs (Continuing Education Units)
PRICE: $2,800.00
Automation Maintenance 1 is a new course designed using Performance-Based Learning strategy which adopts current Adult Learning and Development standards and practices.

The result is a course with well-defined performancebased learning objectives that emphasizes task-based assessments of student performance. To successfully complete each module in the course, a student must demonstrate his/her ability to perform a specific automation task demonstrating the application of automation knowledge and skills.

Brief instructor led discussions followed by numerous hands-on exercises using a Totally Integrated Automation (TIA) plant model develop and reinforce practical experience. The TIA plant model consists of an S7-300 automation system, ET200S distributed I/O station, SIMATIC HMI Touch Panel, and a working conveyor model.

Students perform visual and multi-meter wire checks, hardware component diagnostics and troubleshooting as well as equipment replacement and restoring a failed PLC system to a normal operating state. Upon completion of the course, maintenance technicians should be able to establish communications to a Siemens PLC system, diagnose, troubleshoot, and restore basic faults on an S7 hardware system, reducing costly downtimes. This course offers 60% hands-on lab time and 40% lecture/discussion/Q and A.
Modular in design, this course is fully customizable for those interested in on-site training. Topics are designed for adjustments to meet plant specific needs. Email [email protected] for more details.
Objectives:
Upon completion of this course, the student shall be able to:
• Use a Siemens PG or laptop PC to communicate with an S7 PLC system
• Commission a PLC system:
o Main station
o Remote station
o HMI
o Conveyor
• Examine and complete wiring diagrams for S7300 I/O modules
• Using a Multimeter, wire check S7300 main station and ET200S remote PROFIBUS station I/O modules
• Replace S7 hardware modules, update the hardware configuration and download changes to the PLC
• Diagnose and locate multiple hardware faults using module LEDs & STEP 7 diagnostic tools
• Troubleshoot various basic hardware station faults, module failures, communication faults and restore system operation to a running state
• Wire PROFIBUS DP and PROFINET (RJ45) connectors with corresponding cables
• Diagnose and troubleshoot instructor-set mystery faults with and without Organization Blocks loaded in the CPU
• Monitor the control logic for a PLC conveyor system making light modifications and simple code debugging
• Monitor, Modify and Force I/O
• Backup and restore an S7 project
• Complete an end-of-week comprehensive student project to reinforce and demonstrate learned skills
Topics
1. Installing and wiring Step 7 modules on the main rack
2. Wire checking STEP 7 modules with a meter
3. Installing and wiring ET200s PROFIBUS remote station I/O modules
4. Wire checking ET200S modules with a meter
5. Installing PROFIBUS DP connectors and cables
6. Installing PROFINET connectors and cables
7. Setting PG/PC communications to an S7 PLC system using MPI, PROFIBUS, and PROFINET
8. Backing up (archiving) and restoring (retrieving) an S7 project
9. Using the Hardware Configuration Editor for
a. Configuring and parameterizing modules
b. Commissioning an S7 PLC system
c. Online hardware diagnostics
d. Troubleshooting hardware faults
10. Commissioning an HMI over
a. MPI
b. PROFIBUS DP
c. PROFINET
11. Downloading an HMI Project
12. Backing up and restoring an HMI panel
13. Troubleshooting various PLC hardware system faults
14. Replacing modules, updating and downloading the hardware configuration
15. Troubleshooting hardware faults with and without Organization Blocks in the CPU
16. Monitoring, modifying and forcing I/O
17. Normally open and normally closed field devices vs Normally open and normally closed code contacts
18. Using STEP7 tools and HMI for monitoring and controlling a PLC driven conveyor system

MORE EVENTS

  • CCC Turbomachinery Optimization

    Four day Regional Training designed for Operations and Process personnel, Instrumentation Technicians, and Maintenance Engineers. Different aspects...

  • American Manufacturing Strategies Summit

    Join the industry leaders in exploring the latest technologies and strategies to improve turnaround times and create a more cohesive manufacturing...

  • Live Seminar: Light & Color Measurement - Seattle, WA

    Join Radiant Vision Systems in Seattle, Washington, on October 23 to discuss how to capture and utilize measurements of light and color that...

  • OMRON MACHINE SAFETY SEMINAR

    This seminar takes the Omron Machine Safeguarding Skill Builder (a $5,000 value), and turns it into a free, day-long event that will go over the...

  • LEAP HR: Manufacturing

    Break Away from Reactive HR to Rethink How You Find, Engage and Retain Front-Line Manufacturing Talent and Move from Marginal Gains to Radical Change

VIEW ALL

RELATED