Design of Experiments (DOE) for Process Development and Validation at Singapore | July 9, 2015 9:00 AM - July 10, 2015 6:00 PM | Automation.com

Design of Experiments (DOE) for Process Development and Validation at Singapore

Event Summary

DATE:
July 9, 2015 - July 10, 2015
LOCATION:
Singapore, CA 238867
COUNTRY:
Singapore
START DATE/TIME:
July 9, 2015 9:00 AM
END DATE/TIME:
July 10, 2015 6:00 PM
EVENT TYPE:
Training
HOST:
GlobalCompliancepanel
PHONE:
18004479407
EMAIL:
[email protected]
WEBSITE:
Click here to Visit

Description

Overview:
Prior to developing a process control plan as part of an overall risk management strategy, process development studies must be completed. The objective of these process development studies is to gain knowledge and understanding about how variation in process parameters explains variation in the product quality characteristics of the product.
The use of DOE methodology provides a means to identify process parameters which impact product quality (critical process parameters) and determine the functional relationship that links the process parameters to that critical quality attributes. Screening designs, such as 2k factorial and D-optimal designs are used to determine critical process parameters. Response surface designs, such as Central Composite Designs (CCDs) and I-optimal designs are used to model the functional relationship between those critical process parameters and the critical quality attributes.
This course will begin by presenting a primer on statistical analysis, focusing on the methods required for analysis of designed experiments. It will then present the steps to DOE, while demonstrating valuable risk management tools (Ishikawa and FMEA) which can be use pre and post DOE studies. Next, participants will learn to generate and analyze multiple screening and response surface designs; the participants will leave with an understanding of why and how each are used. Then, the participants will learn how results of the studies can be presented. Lastly, using the results of the studies, the risk management tools will then be updated.
Why should you attend?
The Global Harmonization Task Force (GHTF) Process Validation Guidance for Medical Device Manufacturers provides guidance on where design of experiments should be applied during process validation; it suggests the use of both screening and response surface designs during Operational Qualification. In addition, DOE should be used during multiple phases of design controls: design and development planning, design verification, design validation, design transfer, and design changes.
In Guidance for Industry Q8 Pharmaceutical Development (as well as the annex to Q8), suggests applying experimental design to demonstrate "...an enhanced knowledge of product performance over a range of...process parameters." Using this "...enhanced, quality by design approach..." leads to greater system understanding. That greater system understanding has two elements: identifying critical process parameters and developing a functional relationship that link those critical process parameters to your critical quality attributes (CQAs). This suggests the use of both screening and response surface designs during pharmaceutical development studies.
The need for DOE in product and process development is not only suggested, but imperative for both medical device and drug manufactures.
Areas Covered in the Session:
Learn how to effectively use JMP to:
• identify critical quality attributes (CQAs) that will be used as responses in your designs
• utilize risk management tools to identify and prioritize potential critical process parameters
• identify critical process parameters and develop a functional relationship between those process parameters and your critical-to-quality attributes (CQAs) using both screening and response surface designs
• be able to design and analyze screening designs including a factorial, fractional factorial, and D-optimal design
• understand the need for adding center points to a design
• be able to design and analyze response surface designs including central composite designs (CCDs), Box-Behnken designs, and I-optimal designs
• present results of DOE studies
• use systematic understanding from DOE studies to update the control plan that is part of the overall risk management plan
Who Will Benefit:
• Process Scientist/Engineer
• Design Engineer
• Product Development Engineer
• Regulatory/Compliance Professional
• Design Controls Engineer
• Six Sigma Green Belt
• Six Sigma Black Belt
• Continuous Improvement Manager
Agenda:
Day One
Lecture 1: Primer on Statistical Analysis
• basic statistics
• two-sample t-test
• ANOVA
• regression
Lecture 2: Introduction to Design of Experiments (DOE)
• steps to DOE
• defining critical quality attributes (CQAs)/responses
• identifying and prioritizing potential process parameters
Lecture 3: Screening Designs
• full factorial designs
• 2k factorial designs
Day Two:
Lecture 1: Screening Designs (continued)
• fractional factorial designs
• D-optimal designs
Lecture 2: Response Surface Designs
• 2k factorial designs with center points
• Central Composite Designs (CCDs)
• Box-Behnken designs
• I-optimal designs
Lecture 3: Utilizing Systematic Understanding from DOE Studies
• presenting results
• control plan/risk management strategy
Speaker:
Heath Rushing is the cofounder of Adsurgo and author of the book Design and Analysis of Experiments by Douglas Montgomery: A Supplement for using JMP. Previously, he was the JMP and Six Sigma training manager at SAS. He led a team of nine technical professionals designing and delivering applied statistics and quality continuing education courses. He created tailored courses, applications, and long-term training plans in quality and statistics across a variety of industries to include biotech, pharmaceutical, medical device, and chemical processing. Mr. Rushing has been an invited speaker on applicability of statistics for national and international conferences. As a Quality Engineer at Amgen, he championed statistical principles in every business unit. He designed and delivered a DOE course that immediately became the company standard required at multiple sites.
Location: Singapore Date: July 9th & 10th, 2015 Time: 9:00 AM to 6:00 PM
Venue: Mandarin Orchard Singapore
Venue Address: 333 Orchard Road, Singapore 238867
Price: $2,095.00
(Seminar for One Delegate)
Register now and save $200. (Early Bird)
Until June 10, Early Bird Price: $2,095.00
From June 11 to July 07, Regular Price: $2,295.00
Contact Information:
NetZealous LLC,
DBA GlobalCompliancePanel
161 Mission Falls Lane,
Suite 216, Fremont, CA 94539, USA
USA Phone: 800-447-9407
Fax: 302-288-6884
[email protected]
http://www.globalcompliancepanel.com
Registration Link: http://bit.ly/1HJRVWP

MORE EVENTS

VIEW ALL

RELATED