Safety Instrumented Systems: Design, Analysis & Justification (EC50) | April 6, 2015 8:00 AM - April 9, 2015 4:00 PM | Automation.com

Safety Instrumented Systems: Design, Analysis & Justification (EC50)

Event Summary

DATE:
April 6, 2015 - April 9, 2015
LOCATION:
Anchorage, AK 99503
COUNTRY:
United States
START DATE/TIME:
April 6, 2015 8:00 AM
END DATE/TIME:
April 9, 2015 4:00 PM
EVENT TYPE:
Training
HOST:
aeSolutions
PHONE:
9078655992
EMAIL:
[email protected]
WEBSITE:
Click here to Visit

Description

Length: 4 days

CEU Credits: 2.8
Course Hours: 8:00 a.m. - 4:00 p.m.
Course: $2505

This course is required for the ISA84 SIS Fundamentals Specialist Certificate Program

Description:
This course focuses on the engineering requirements for the specification, design, analysis, and justification of safety instrumented systems for the process industries. Students will learn how to determine safety integrity levels and evaluate whether proposed or existing systems meet the performance and documentation requirements defined in the ISA 84 (IEC61511) standard.

This course is required for the ISA84 Safety Instrumented Systems Certificate Programs. You can register for the exam through ISA after completing the course.

Those who successfully complete this course and pass the exam receive the designation of ISA84 SIS Fundamentals Specialist.

You will be able to:
Differentiate between process control and safety control
Implement the ISA84 (IEC 61511) standard
Evaluate process risk levels
Select Safety Integrity Levels (SILs) for Safety Instrumented Functions (SIFs) using a variety of techniques
Analyze the performance of different logic system technologies
Analyze the performance of various sensor, logic, and final element configurations, as well as the impact of diagnostics, test intervals, common cause, system size, imperfect manual testing, and bypassing
Determine optimum system test intervals
Specify and select safety instrumented systems
Apply the documentation requirements for process safety management, regulations, and industry standards
You will cover:
Introduction: Accidents and Resulting Regulations | Lessons Learned From Past Accidents | Standards & Guidelines of Interest
Scope & Safety Life Cycle: Management Issues | Design Life Cycle |
Safety Layers: Independent Safety Layers | Separation of Control and Safety
Risk, Hazard Analysis, Safety Integrity Levels: Hazard Identification | Risk Assessment | Selecting Safety Integrity Levels | Layer of Protection Analysis
Failure Modes & Reliability Concepts: Safe vs. Dangerous | Failure Mode vs. Technology | Failure Rates | Modeling Techniques | Test Intervals | Fault Tolerance Requirements
System Technologies: Pneumatic | Relay | Microprocessor | Field Devices | Certification | Prior Use
System Design: Requirements Specification | General Design Issues (Environment, Interfaces, Bypasses, Resets, etc.)
Operations and Maintenance: Installation | Operation & Maintenance | Testing | Management of Change | Decommissioning
Classroom/Laboratory Exercises:
Calculate device failure rates
Model system performance for relay and software-based logic systems
Model the impact of different configurations, field devices, automatic diagnostics, manual test intervals, common cause, and imperfect manual testing and bypassing
Determine the SIL (safety integrity level) of a sample functions and design a system to meet the performance requirements
A hand-held/scientific calculator should be brought to class.

Recommended Resources: Safety Instrumented Systems-Design, Analysis and Justification, 2nd Edition

Includes ISA Standards:

ANSI/ISA-84.91.01-2012: Identification and Mechanical Integrity of Safety Controls, Alarms, and Interlocks in the Process Industry
ANSI/ISA-84.00.01-2004, Part 1: Framework, Definitions, System Hardware and Software Requirements
ANSI/ISA-84.00.01-2004, Part 2: Functional Safety: Safety Instrumented Systems for the Process Industry Sector
ANSI/ISA-84.00.01-2004, Part 3: Guidance for the Determination of the Required Safety Integrity Levels - Informative

MORE EVENTS

VIEW ALL

RELATED