Advanced Micro Controls introduces SD4840E2 integrated controller + drive
February 22, 2019 – Advanced Micro Controls releases their DC-powered integrated stepper controller/drive package with multi-protocol Ethernet communication. AMCI’s SD4840E2 combines drive and motion control technology into a single product. The SD4840E2 integrated controller + drive communicates with the host PLC over the EtherNet/IP, Modbus-TCP, or Profinet network, and move commands are programmed through the host PLC’s software. AMCI’s SD4840E2’s design and standard DIN rail mounting makes it a solution for new installations or controls upgrades.
Stepper Controller/Drive Features:
- Stepper Controller + Drive in single package
- E2 Ethernet Technology
- 0.1 – 4.0Arms output current
- Full complement of motion profiles including homing and electronic gearing
- Works with most 2-phase stepper motors
- Programming without additional software
- DIN rail mounting
The SD4840E2 features AMCI’s E2 Technology which is a multi-protocol approach to Ethernet distributed I/O that makes moving from one industrial Ethernet protocol to another simple. Supported protocols include EtherNet/IP, Modbus-TCP, and PROFINET. An advanced web server integrated within the SD4840E2 facilitates network configuration via web-browser. The SD4840E2 has a built-in Ethernet switch and dual network ports, offering fault-tolerant networking; DLR for EtherNet/IP & MRP for Profinet, which can detect a break in the network and redirect the network traffic maintaining communication and system up-time. The embedded switch also provides a network connection for additional devices without increasing the nodes on an existing ethernet switch.
- Related Portals:
- Motion Control, Motors & Drives, Programmable Controllers, Factory Automation, Industrial Networks, EtherNet/IP, PROFINET
- Pages:
- Home Page
MORE PRODUCTS
-
Axiomtek announces Agent336 embedded box PC for in-vehicle applicationsThe Agent336 comes with intelligent power management for ACC on/off delay, shutdown delay and over/under voltage protection. It runs on Linux...
-
igus introduces CF880/CF881 and CF890/CF891 control cablesThe cables are up to 20 percent thinner than previous models, have a tested service life of five million cycles and come with a 36-month guarantee.
-
Reliable Controls announces SMART-Sensor with VOC SensorSMART-Sensor devices can be ordered with a volatile organic compound sensor that provides relevant air quality measurement for the comfort and...
-
Optimal Engineering Systems releases AY110-400-01 and AY110-400-02 rotary stagesThe AY110-400-01 rotary stage is equipped with stepper motor and a knob for manual adjustment which can be replaced with an optical encoder for...
-
Beckhoff introduces C6025 industrial PCMeasuring 82 x 127 x 40 mm and combining computing performance with a fanless design, the Microsoft “Azure Certified” C6025 IPC is a choice for...
RELATED
-
-
IFR Report: Korea hits record 300,000 industrial robotsWithin five years, the country has doubled its number of industrial robots. Following Japan and China, the country ranked third in 2018. But the...
-
ARC Advisory Group Report: ABB leads DCS market for 20th consecutive yearAccording to the report, ABB’s presence in many end-user industries was a major factor in this success. The DCS market saw its main growth in oil...
-
Litum IoT helps Ferrero Group enhance worker trackingFerrero needed a way to confirm that all its employees could be safely accounted when an emergency evacuation was underway.
-
Association for Advancing Automation Report: North American machine vision market down in 2019Machine vision systems saw a decrease of 2% year over year, at $599.9 million. This category includes smart cameras and application specific...
