EC50 ISA SIS Design, Analysis and Justification | September 29, 2015 - October 2, 2015 | Automation.com

EC50 ISA SIS Design, Analysis and Justification

Event Summary

DATE:
September 29, 2015 - October 2, 2015
LOCATION:
Greenwood , IN 46143
COUNTRY:
USA
START DATE/TIME:
September 29, 2015
END DATE/TIME:
October 2, 2015
EVENT TYPE:
Training
HOST:
Endress+Hauser
PHONE:
888-ENDRESS
EMAIL:
[email protected]
WEBSITE:
Click here to Visit

Description

Content
• Introduction: Accidents and Resulting Regulations | Lessons Learned From Past Accidents | Standards & Guidelines of Interest
• Scope & Safety Life Cycle: Management Issues | Design Life Cycle
• Safety Layers: Independent Safety Layers | Separation of Control and Safety
• Risk, Hazard Analysis, Safety Integrity Levels: Hazard Identification | Risk Assessment | Selecting Safety Integrity Levels | Layer of Protection Analysis
• Failure Modes & Reliability Concepts: Safe vs. Dangerous | Failure Mode vs. Technology | Failure Rates | Modeling Techniques | Test Intervals | Fault Tolerance Requirements
• Operations and Maintenance: Installation | Operation & Maintenance | Testing | Management of Change | Decommissioning
Objectives
• Those who successfully complete this course and pass the exam receive the designation of ISA84 SIS Fundamentals Specialist
Who should attend?
• Engineers working with SIS in the process industries

MORE EVENTS

  • SGTech Europe 2019

    SGTech Europe 2019 - Smart Grid Innovation Project Exchange
    3-Day Conference, Exhibition and Networking Forum
    26-28 March 2019 | Amsterdam, The...

  • PLC Training Seminar

    Start with basics move on to troubleshooting, then learn the foundations of good PLC programming while writing your first IEC-1131 compliant PLC...

  • Foam Expo North America Exhibition and Conference

    Foam Expo is North America's dedicated free-to-attend exhibition and conference for the technical foam industry.

  • ISA Toledo Section Vendor Exposition and Symposium

    Toledo ISA Exposition and Symposium, March 27, 2019, 11:00am to 6:00pm, www.isa.org/toledo. This is your best opportunity to see the newest...

  • HANNOVER MESSE 2019

    1 - 5 April 2019 (Monday - Friday), daily 9 a.m. to 6 p.m.: all key technologies and core areas of industry – from research and development,...

VIEW ALL

RELATED