Elements of Current Good Manufacturing Practices (cGMP) for Complying with the Food Safety Modernization Act (FSMA) | August 13, 2015 8:30 AM - August 14, 2015 4:30 PM | Automation.com

Elements of Current Good Manufacturing Practices (cGMP) for Complying with the Food Safety Modernization Act (FSMA)

Event Summary

DATE:
August 13, 2015 - August 14, 2015
LOCATION:
Minneapolis, MN 55401
COUNTRY:
USA
START DATE/TIME:
August 13, 2015 8:30 AM
END DATE/TIME:
August 14, 2015 4:30 PM
EVENT TYPE:
Training
HOST:
ComplianceOnline
PHONE:
888-717-2436
EMAIL:
[email protected]
WEBSITE:
Click here to Visit

Description

Course Description:
In this two day workshop conference you will learn the various rules regulating the development, manufacturing and quality assurance of products manufactured for animals and humans, the basis of Hazard analysis and critical control points (HACCP) and the preventative measures soon to be enacted for mitigating the exposure of adulterated products to the end user. Steps can be implemented immediately from this course such as ensuring that the personnel have been properly instructed and the training documented on critical control points established for preventing adulterated foods.

Learning Objectives:
Upon completing this course participants should:

Read and understand what the expectations are for producers of products intended for animal or human consumption that will be regulated by the FSMA
Utilize a risk based approach such as HACCP for developing a strategy for managing the flow of materials through your facility so as to minimize the risk of adulteration during receiving , processing, finishing, storing and shipping intermediates or final product
Evaluate the effectiveness of the preventative controls
Learn how to use modern control charting techniques to detect trends, and how to respond to and use this information for risk based decision making
Learn how conduct an investigation into root cause


Who will Benefit:
Environmental, Health and Safety managers (EHS) and Quality Managers will benefit greatly from this course due to the proximity of the FSMA rule to EHS principles and quality practices already established:

Senior quality managers
Quality professionals
Environmental, Health and Safety managers
Regulatory professionals
Compliance professionals
Production supervisors
Manufacturing engineers
Production engineers
Design engineers
Process owners
Quality engineers
Quality auditors
Document control specialists


Topic Background:
The FDAs from "Farm to Table" initiative is an attempt to minimize exposure to adulterated products to the end users; animals, both livestock and pets, as well as humans. For instance, treating "feed as food," the FDA FSMA rule proposes monitoring the presence of antibiotics in distillers' products through routine surveillance sampling or directed sampling and when the results of sampling activities are complete, will continue to make such results available. In addition, controls are proposed to mitigate the risk that animals and humans will be exposed to adulterated products. Preventative Controls which include hazard analysis will be required to identify and evaluate known or reasonably foreseeable feed safety hazards, establish preventive controls to prevent or significantly minimize any "significant" hazards (hazards for which a person knowledgeable in food safety would establish controls), monitor the preventive controls (including written procedures), verify the controls are working, maintain a written food safety plan that incorporates all of the above elements and maintain records regarding the monitoring and verification steps. The second set of controls from current Good Manufacturing Practices (cGMPs) arise from the FDAs quality management systems approach for the food, beverage and drug industry to achieve compliance with the FD&C act where they are focused on mitigation of adulteration out of the following areas and practices: Plant personnel (hygienic practices), Plant construction and grounds (waste disposal, ventilation, easy to clean facility), Sanitation (maintaining plant in good and clean repair, effective pest control), Sanitary facilities and controls (clean/adequate water supply, properly designed plumbing system, hand wash facilities), Equipment and utensils (able to be cleaned and well maintained), Plant operations (proper procedures to prevent contamination) and Holding and distribution (proper containers to avoid contamination, inspection of incoming containers).


For Registration - http://www.complianceonline.com/cgmp-fda-food-safety-modernization-act-fsma-haccp-seminar-training-80278SEM-prdsm?channel=automation


Note: Use coupon code 232082 and get 10% off on registration.

MORE EVENTS

  • CCC Turbomachinery Optimization

    Four day Regional Training designed for Operations and Process personnel, Instrumentation Technicians, and Maintenance Engineers. Different aspects...

  • American Manufacturing Strategies Summit

    Join the industry leaders in exploring the latest technologies and strategies to improve turnaround times and create a more cohesive manufacturing...

  • Live Seminar: Light & Color Measurement - Seattle, WA

    Join Radiant Vision Systems in Seattle, Washington, on October 23 to discuss how to capture and utilize measurements of light and color that...

  • OMRON MACHINE SAFETY SEMINAR

    This seminar takes the Omron Machine Safeguarding Skill Builder (a $5,000 value), and turns it into a free, day-long event that will go over the...

  • LEAP HR: Manufacturing

    Break Away from Reactive HR to Rethink How You Find, Engage and Retain Front-Line Manufacturing Talent and Move from Marginal Gains to Radical Change

VIEW ALL

RELATED