Endress+Hauser Announces Summer 2015 Training Courses | Automation.com

Endress+Hauser Announces Summer 2015 Training Courses

July 6, 2015— Endress+Hauser announces its Summer 2015 schedule of instrumentation training courses. Classes typically are a combination of classroom and hands-on training on either the Endress+Hauser PTU™ (Process Training Unit), a full-scale, working process skid with on-line instrumentation and controls, or live instruments in training stands, both designed to simulate operating conditions.

Courses include:

July Training Events

L-100 Radar Level Fundamentals

A-101 pH & Conductivity Measurement School

July 13 to July 15, 2015

Memphis, TN 38141 https://www.cvent.com/events/a-101-ph-conductivity-school-memphis-tn/registration-8ddfe1a255e34da1bbd03b604b63c95b.aspx

This course will start by providing maintenance and engineering personnel with a basic understanding of pH and conductivity analytical technologies. This basic portion will focus on concepts applicable to virtually any manufacturer's equipment. Following this introduction, we will proceed with in-depth training on pH and conductivity. The class will be a combination of classroom and hands-on training.

I-101 Basic Instrumentation School

July 14, 2015 to July 15, 2015

Matthews, NC 28106 http://www.cvent.com/d/xrqlkm/4W

and

July 14, 2015 to July 15, 2015

La Porte, TX 77571 http://www.cvent.com/d/0rqjng/4W

This hands-on introductory course to instrumentation will start by providing maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations. Fundamental operation of the common instruments found in today's process industries will be examined from a view applicable to virtually any manufacturer's equipment. Typical troubleshooting procedures for instrumentation will be covered and practiced.

I-102 Instrumentation Technology School

July 20, 2015 to July 23, 2015

Lakeland, FL 33801 http://www.polk.edu/corporate-college/advanced-manufacturing/industrial-instrumentation/

and

July 20, 2015 to July 24, 2015

Mobile. AL 36693 https://www.cvent.com/events/i-102-instrumentation-technology-mobile-al/registration-e2638fbe691b49e9933a5b49d4f0065c.aspx

and

July 27, 2015 to July 31, 2015

Gonzales, LA 70737 https://www.cvent.com/events/i-102-instrumentation-technology-gonzales-la/registration-784a711e70114813a4cc2ccd146ab58f.aspx

This extended course in process instrumentation will provide maintenance and engineering personnel with a deeper understanding of the principles explored in our Basic Instrumentation School (I101). Fundamental and detailed operation of the common instruments and applications found in today's process industries will be examined from a view applicable to virtually any manufacturer's equipment. Typical troubleshooting procedures for instrumentation will be covered and practiced.

L-101 Level School - Introductory

July 27, 2015 to July 28, 2015

Lakeland, FL 33801 http://www.polk.edu/corporate-college/advanced-manufacturing/industrial-instrumentation/

This introductory level course will start by providing maintenance and engineering personnel with a basic understanding of numerous level technologies. This basic portion will focus on concepts applicable to virtually any manufacturer's equipment. Following this introduction, we will proceed with in-depth training on Time of Flight (ToF) technologies that include a variety of radar types as well as ultrasonic level transmitters. This will be a combination of classroom and hands-on training.

F-101 Flow School - Introductory

July 29, 2015 to July 30, 2015

Lakeland, FL 33801 http://www.polk.edu/corporate-college/advanced-manufacturing/industrial-instrumentation/

This introductory course to flow will start by providing maintenance and engineering personnel with a basic understanding of numerous flow technologies. The basic portion will focus on the physics of flow and concepts applicable to virtually any manufacturer's equipment. Following this introduction, we will proceed with in-depth training on magnetic and Coriolis flow meters. The class will be a combination of classroom and hands-on training.

August Training Events

C-101 Pressure, Temperature and Calibration School

Aug 3, 2015 to Aug 6, 2015

Mobile, AL 36693 https://www.cvent.com/events/c-101-pressure-temperature-calibration-school-mobile-al/registration-fd9a8a1bde424287b1a080eaff313619.aspx

and

Aug 10, 2015 to Aug 12, 2015

Lakeland, FL 33801 http://www.polk.edu/corporate-college/advanced-manufacturing/industrial-instrumentation/

This introductory course will by provide maintenance and engineering personnel with a basic understanding of numerous pressure, temperature and calibration technologies. This basic portion will focus on concepts applicable to virtually any manufacturer's equipment, as well as the skills needed to set up and maintain such equipment. Introductions and lectures on the technologies will be followed with in-depth demonstrations and hands-on training exercises.

I-101 Basic Instrumentation School

Aug 4, 2015 to Aug 5, 2015

Greenwood, IN 46143 http://www.cvent.com/d/9rqlhc/4W

This hands-on introductory course to instrumentation will start by providing maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations. Fundamental operation of the common instruments found in today's process industries will be examined from a view applicable to virtually any manufacturer's equipment. Typical troubleshooting procedures for instrumentation will be covered and practiced.

L-103 Time of Flight School

Aug 6, 2015

Greenwood, IN 46143 http://www.cvent.com/d/wrqlh4/4W

This Time of Flight (ToF) course for level will start by providing maintenance and engineering personnel with a basic understanding of numerous ToF technologies. This basic portion will focus on concepts applicable to virtually any manufacturer's equipment. Following this introduction, we will proceed with in-depth training on ToF technologies that include a variety of radar types as well as ultrasonic level transmitters. The class will be a combination of classroom and hands-on training.

F-103 Coriolis School

Aug 7, 2015

Greenwood, IN 46143 http://www.cvent.com/d/7rqlhc/4W

This Coriolis flow course (8 hours) will start by providing maintenance and engineering personnel with a basic understanding of the Coriolis principle. This basic portion will focus on concepts applicable to virtually any manufacturer's equipment. Following this introduction, we will proceed with in-depth training on density and concentration measurements. This class will be a combination of classroom and hands-on training in our PTU® (Process Training Unit).

F-100 Coriolis Flow Fundamentals

Aug 10, 2015 to Aug 14, 2015

Gonzales, LA 70737 https://www.cvent.com/events/f-101-f-102-flow-school-combo-gonzales-la/registration-50ffe44559674ed8a90a5904d0008e5d.aspx

This is a basic fundamental course (4 hours) for Coriolis mass flow technology for maintenance technicians. We will dedicate a half day to Coriolis technology to give you a basic understanding of this flow measurement technology. The class will consist of a classroom presentation, product demonstration, group discussion, and a small amount of hands-on training with working table top units. There will be a live installation demonstration on a PTU® (Process Training Unit).

L-101 Level School - Introductory

Aug 18, 2015 to Aug 20, 2015

Matthews, NC 28106 http://www.cvent.com/d/nrqlkm/4W

and

Aug 24, 2015 to Aug 25, 2015

Lakeland, FL 33801 http://www.polk.edu/corporate-college/advanced-manufacturing/industrial-instrumentation/

This introductory level course will start by providing maintenance and engineering personnel with a basic understanding of numerous level technologies. This basic portion will focus on concepts applicable to virtually any manufacturer's equipment. Following this introduction, we will proceed with in-depth training on Time of Flight (ToF) technologies that include a variety of radar types as well as ultrasonic level transmitters. This will be a combination of classroom and hands-on training.

I-102 Instrumentation Technology School

Aug 24, 2015 to Aug 28, 2015

Memphis, TN 38141 http://www.trinovainc.com/classsignup.php?ClassCode=I-102&Date=8/24/2015%20to%208/28/2015&Location=Memphis

This extended course in process instrumentation will provide maintenance and engineering personnel with a deeper understanding of the principles explored in our Basic Instrumentation School (I101). Fundamental and detailed operation of the common instruments and applications found in today's process industries will be examined from a view applicable to virtually any manufacturer's equipment. Typical troubleshooting procedures for instrumentation will be covered and practiced.

L-102 Level School - Advanced

Aug 26, 2015 to Aug 27, 2015

Lakeland, FL 33801 http://www.polk.edu/corporate-college/advanced-manufacturing/industrial-instrumentation/

The Advanced Level School begins with a brief review of current level technologies. Following the technology refresher, we will proceed to look deeper at each level measuring technology discussing then implementing proper techniques of configuration and calibration and troubleshooting. There will be an emphasis on an in depth understanding of Time of Flight, ToF technologies and envelope curves. This class will primarily be focused on hands-on training at our PTU® (Process Training Unit).

PTU Test Drive (Free Event)

Aug 28, 2015

Greenwood, IN 46143 https://app.smartsheet.com/b/form?EQBCT=6b5afd703b8949fa95048d59bf08c006

Find out what Endress+Hauser has to offer in the area of process automation training with free lunch events that feature valuable presentations by industry professionals, tours of our PTU® (Process Training Unit) facilities, and a chance to ask your questions to our process experts.

L-100 Radar Level Fundamentals

Aug 31, 2015 to Sept 4, 2015

Mobile, AL 36693 https://www.cvent.com/events/l-101-l-102-level-school-combo-mobile-al/registration-1b5e313badeb4ca18ad0cb5408daee0c.aspx

This is a basic fundamental course (4 hours) for Guided Wave and Free Space Radar Level for maintenance technicians. We will dedicate a half day to radar technology to give you a basic understanding of this level measurement technology. The class will be primarily a classroom presentation, with product demonstrations, group discussions and a small amount of hands-on training with working table top units. There will be a live installation demonstration on a PTU® (Process Training Unit).

A-101 pH & Conductivity Measurement School

Aug 31, 2015 to Sept 1, 2015

Lakeland, FL 33801 http://www.polk.edu/corporate-college/advanced-manufacturing/industrial-instrumentation/

This course will start by providing maintenance and engineering personnel with a basic understanding of pH and conductivity analytical technologies. This basic portion will focus on concepts applicable to virtually any manufacturer's equipment. Following this introduction, we will proceed with in-depth training on pH and conductivity. The class will be a combination of classroom and hands-on training.

September Training Events

F-101 Flow School - Introductory

Sept 2, 2015 to Sept 3, 2015

Lakeland, FL 33801 http://www.polk.edu/corporate-college/advanced-manufacturing/industrial-instrumentation/

This introductory course to flow will start by providing maintenance and engineering personnel with a basic understanding of numerous flow technologies. The basic portion will focus on the physics of flow and concepts applicable to virtually any manufacturer's equipment. Following this introduction, we will proceed with in-depth training on magnetic and Coriolis flow meters. The class will be a combination of classroom and hands-on training.

PID Analysis Troubleshooting and Loop Tuning

Sept 9, 2015

Greenwood, IN 46143 https://www.cvent.com/events/pid-analysis-troubleshooting-and-tuning/registration-5001b2e988d34657b706d20ce95c5a1c.aspx

Optimization of your control system offers one of the highest returns-on-investment possible. Applying the concepts in this course will enable you to realize immediate and long-lasting payback, and smoother operations.

C-204 Industrial Ethernet

Sept 10, 2015 to Sept 11, 2015

Greenwood, IN 46143 http://www.cvent.com/d/qrqlgj/4W

You will learn how an Ethernet network is installed with the help of actual hands-on tasks. Beginning with configuring your own Ethernet cable and planning your network, you will discover how Ethernet works in detail. Features like device setup, troubleshooting as well as wireless and fiber optical networks are part of the training.

F-103 Coriolis Flow School

Sept 15, 2015

La Porte, TX 77571 https://www.cvent.com/events/f-103-coriolis-school-laporte-tx/registration-54a03e905ed1427188ebd006231c273f.aspx

and

Sept 16, 2015

La Porte, TX 77571 http://www.cvent.com/d/7rqlhd/4W

This Coriolis flow course (8 hours) will start by providing maintenance and engineering personnel with a basic understanding of the Coriolis principle. This basic portion will focus on concepts applicable to virtually any manufacturer's equipment. Following this introduction, we will proceed with in-depth training on density and concentration measurements. This class will be a combination of classroom and hands-on training in our PTU® (Process Training Unit).

C-101 Pressure, Temperature and Calibration School

Sept 28, 2015 to Oct 1, 2015

Gonzales, LA 70731 https://www.cvent.com/events/c-101-pressure-temperature-calibration-school-gonzales-la/registration-6932926ef90f4ebd9f90e12e785aa6cb.aspx

This introductory course will by provide maintenance and engineering personnel with a basic understanding of numerous pressure, temperature and calibration technologies. This basic portion will focus on concepts applicable to virtually any manufacturer's equipment, as well as the skills needed to set up and maintain such equipment. Introductions and lectures on the technologies will be followed with in-depth demonstrations and hands-on training exercises.

F-100 Coriolis Flow Fundamentals

Sept 21, 2015 to Sept 25, 2015

Mobile, AL 36693 https://www.cvent.com/events/f-101-f-102-flow-school-combo-mobile-al/registration-b0cb361f0cc7410794e0ad26bbea3378.aspx

This is a basic fundamental course (4 hours) for Coriolis mass flow technology for maintenance technicians. We will dedicate a half day to Coriolis technology to give you a basic understanding of this flow measurement technology. The class will consist of a classroom presentation, product demonstration, group discussion, and a small amount of hands-on training with working table top units. There will be a live installation demonstration on a PTU® (Process Training Unit).

F-102 Flow School – Advanced

Sept 22, 2015

Lakeland, FL 33801 http://www.polk.edu/corporate-college/advanced-manufacturing/industrial-instrumentation/

This advanced course is designed for those students having successfully completed basic Flow School (F-101). The class will start by providing instrument techs and engineers with a brief section on the basic understanding of numerous flow technologies. Following this introduction, we will proceed with in-depth training on vortex, magnetic, ultrasonic and Coriolis flow meters. This class will primarily be hands-on training at our PTU® (Process Training Unit).

PTU Test Drive (Free Event)

Sept 25, 2015

Romeoville, IL 60446 https://app.smartsheet.com/b/form?EQBCT=5e97168438c84ae39811013b7a5201e0

Find out what Endress+Hauser has to offer in the area of process automation training with free lunch events that feature valuable presentations by industry professionals, tours of our PTU® (Process Training Unit) facilities, and a chance to ask your questions to our process experts.

EC50 ISA SIS Design, Analysis and Justification

Sept 29, 2015 to Oct 2, 2015

Greenwood, IN 46143

https://www.isa.org/events-conferences/events-calendar/event-details/?productId=37309697

This course focuses on the engineering requirements for the specification, design, analysis, and justification of safety instrumented systems for the process industries. Students will learn how to determine safety integrity levels and evaluate whether proposed or existing systems meet the performance and documentation requirements defined in the ISA 84 (IEC61511) standard.

About Endress+Hauser

Endress+Hauser is one of the largest instrument manufacturers in the United States’ industrial automation industry – specializing in automation solutions for the Chemical, Food & Beverage, Oil & Gas, Water and Wastewater, Life Sciences, Power and Energy, Primaries, and Pulp and Paper Industries. Endress+Hauser, a Switzerland based company, first began operations in the U.S. in 1970. Since that time, Endress+Hauser has continued to invest in its U.S. operations - investing an average of 10% of its annual revenue into its infrastructure. For more information, please visit www.us.endress.com.

 

Did you Enjoy this Article?

Check out our free e-newsletters
to read more great articles.

Subscribe Now

MORE INDUSTRY NEWS

VIEW ALL

RELATED