Endress+Hauser announces updates to Picomag electromagnetic flowmeter | Automation.com

Endress+Hauser announces updates to Picomag electromagnetic flowmeter

October 222019
Endress+Hauser announces updates to Picomag electromagnetic flowmeter

October 22, 2019 – Endress+Hauser announces updates to its Picomag electromagnetic flowmeter. The Picomag update enables measurement of flow of electrically conductive fluids and the process temperature and conductivity. It enables commissioning with Bluetooth using the SmartBlue App and integration with IO-Link technology.

Picomag can be installed into any pipe up to 2” in diameter, even in confined spaces. For this purpose, there are various process connection adapters available, such as NPT-thread, R-thread, internal thread, Tri-Clamp or Victaulic. Picomag is a solution for applications where the focus is on high repeatability (±0.2% o.f.s.) and measured values – e.g. for correctly measuring water flows 198 gal/min.

Picomag is suitable for process temperatures between 14 to 158 °F (temporarily up to 185 ºF) as well as for process pressures up to 232 psi. Picomag requires no inlet and outlet runs and thus can be mounted directly before or after a pipe bend.

The display allows a reading of flow, temperature, conductivity and totalizer values. Errors occurring during operations, such as a partial pipe filling or an exceeded temperature limit, are displayed via diagnostic symbols in accordance with NAMUR recommendation NE107. The screen rotates automatically depending on the installation position (horizontal or vertical). Configuration parameters can be called up and monitored by knocking on the device.

It is possible to carry out wireless configuration or data retrieval over a distance of 32 ft Bluetooth connection at installation sites which are difficult to access. Endress+Hauser’s SmartBlue App allows navigation through all device and diagnostic functions.

Picomag provides digital data transmission to process control systems via IO-Link technology. The IO-Link master as an interface allows users to have data access from the control room.

MORE PRODUCTS

VIEW ALL

RELATED