F-100 Coriolis Flow Fundamentals | July 8, 2014 - July 8, 2014 | Automation.com

F-100 Coriolis Flow Fundamentals

Event Summary

July 8, 2014
LaPorte, TX 77571
July 8, 2014
July 8, 2014


This is a basic fundamental course (4 hours) for Coriolis mass flow technology for maintenance technicians. The class will be primarily classroom presentation, product demonstration, group discussion, and a small amount of hands-on training with working table top units. We will dedicate a half day to Coriolis technology to give a basic understanding of this flow measurement technology. There will be a live installation demonstration on a Process Training Unit (PTU®), which is a full-scale, working process skid with on-line instrumentation and controls, designed to simulate real world operating conditions. Product experts will be on hand to field unique application questions to help solve specific problems.

At the conclusion of the course attendees should be able to:

• Have a basic awareness of the Coriolis measuring principle and understand the strengths and limitations
• Work with instrumentation specialists to specify the best type of mass flow technology for a variety of installations
• Set up and commission Endress+Hauser Promass Coriolis flowmeter.
• Use PC-based software tools to setup Endress+Hauser Promass flowmeter and verify the health of the instrument and its signals
• Diagnose and correct problems associated with Coriolis flow systems

The course will specifically cover:

• Coriolis mass flowmeters
• Endress+Hauser FieldCare Software Tooling


  • 4th Smart Manufacturing summit

    This summit is designed as a 2-track event (Robotics&Automation and Manufacturing Excellence) to provide a platform for the key decision makers of...

  • SGTech Europe 2019

    SGTech Europe 2019 - Smart Grid Innovation Project Exchange
    3-Day Conference, Exhibition and Networking Forum
    26-28 March 2019 | Amsterdam, The...

  • PLC Training Seminar

    Start with basics move on to troubleshooting, then learn the foundations of good PLC programming while writing your first IEC-1131 compliant PLC...

  • Foam Expo North America Exhibition and Conference

    Foam Expo is North America's dedicated free-to-attend exhibition and conference for the technical foam industry.

  • ISA Toledo Section Vendor Exposition and Symposium

    Toledo ISA Exposition and Symposium, March 27, 2019, 11:00am to 6:00pm, www.isa.org/toledo. This is your best opportunity to see the newest...