IHS Markit releases “Energy Efficiency in Industry” report

March 18, 2019 – There are a variety of initiatives, policies and mandates around the world designed to promote energy efficiency. However, energy-efficiency strategies and investment varies by industry, according to a new report from business information provider IHS Markit. Regardless of how they differ, the goal of reducing energy use and costs remains the same.
While residential and commercial buildings consume around one-third (30 percent) of global energy, the industrial sector consumes 50 percent. Following are four of the key trends noted in the IHS Markit “Energy Efficiency in Industry” report, which includes industry case studies for smart metering, energy storage, motors, and switchgear:
- Advanced metering infrastructure (AMI) gives consumers greater visibility into their energy consumption, which is shown to result in a reduction in energy demand. More than 100 million communicating electricity meters now ship to consumers and industry each year.
- The installation of energy-storage technology alone does not reduce the total energy demand on the grid, but it allows better flexibility for consumers and tutilities to decide whether to use the energy from their energy storage systems or from the grid itself.
- Motors account for 60 percent of industrial energy consumption – in fact, the single largest area of improvement in energy efficiency that can be made is to upgrade from international efficiency class-one and class-two (IE1 and IE2) motors to IE3 and IE4 motors.
- Redesigning switchgear through size, weight, and power (SWaP) can lead to reductions in energy use and heat loss.
If companies continue to innovate and invest in energy efficiency in just these four areas, industrial energy demand could potentially fall as much as 14 percent, while consumers could reduce their energy costs by 10 percent. “If even half of those potential savings can be realized in the next ten years, it would be a huge offset to the growing global energy demand,” said Susanne Cumberland, senior research analyst, IHS Markit.
A good example of industry-based differences can be seen, when comparing the industrial automation industry to the energy technology industry. While the focus of industrial automation companies is on efficiency cost savings created through investing in hardware improvements, energy technology companies are increasingly focused on software solutions and energy management, to reduce energy consumption and optimize demand cycles to reduce costs.
Energy efficiency goals will only increase, as more legislation comes to fruition, and as the business case for improved hardware and software continues to grow. There will be even more focus on legislation in the coming years, as the European Union Energy Strategy, China’s 13th Five-Year Plan and other regional legislative efforts reach major milestones in 2020 and 2030.
“The financial incentives of energy efficiency differ, but the same core legislation packages are forcing action in all industries, which is reflected in their varied investment approaches,” Cumberland said. “The internet of things and other transformational technologies are also helping to expand the transition toward energy efficiency across all industries.”

Check out our free e-newsletters
to read more great articles.
MORE RESOURCES
-
ODVA announces enhancements to EtherNet/IP Specification
The published enhancements to The EtherNet/IP Specification outline integration of NAMUR NE 107 diagnostics for process automation into CIP...
-
IDTechEx Report: Autonomous cars could accout for 4 trillion miles of road travel by 2040
IDTechEx has recently seen competitors joining hands and forming some unlikely-sounding alliances to reduce the cost of autonomous driving...
-
Phoenix Contact releases firmware 2.05.1 for TC Router product range
The TC Router permits remote access to SCADA networks and control systems over the cellular network. Since these networks typically involve...
-
VDMA OPC Machine Vision Initiative and OPC UA Foundation announce OPC UA demonstrator
As part of a joint project, members of the VDMA OPC Machine Vision Initiative together with the OPC UA Foundation, have developed a hardware...
-
Interact Analysis releases The Low Voltage AC Motor Drives Market – 2019 report
The research shows that growth in the intralogistics and materials handling sector has led to increased demand for decentralised and motor mounted...
RELATED
-
Pepperl+Fuchs Comtrol and Callisto Integration announce strategic partnership
Pepperl+Fuchs Comtrol and Callisto work with each manufacturing customer to deliver initial solutions that have tangible results, and then collect...
-
ST Robotics providing hands-on robotics training to university students
More than 30 other educational institutions have benefited from ST Robotics’ systems. These include: MIT, Cambridge University, Ecole Nationale...
-
Senet announces partnership with Zenseio
Senet has certified the Zenseio LSMP2 - Professional Multi-purpose Telemetry Station, providing the agriculture market with a pre-integrated,...
-
Arena Solutions announces strategic partnership with PRG
This deepened strategic partnership expands PRG’s services for Arena customers that desire assistance or simply have limited internal resources....
-
Genius Garage announces slot car STEM program in Detroit
Applicants must write a minimum one-page paper as to why they like cars and racing and what they think they will learn from the program that will...