LaserLinc introduces Diameter, Ovality, Eccentricity, and Flaw Detection measurement systems with OPC UA & DA communication

January 23, 2019 – LaserLinc introduced Diameter, Ovality, Eccentricity, and Flaw Detection measurement systems with OPC UA & DA communication.
All of LaserLinc’s in-process and off-line measurement and control systems are now available with OPC, an industrial communications protocol, including the latest platform/operating system independent Universal Architecture (OPC-UA) standard. OPC-UA ensures measurement systems are compatible with Manufacturing 4.0 and IIoT.
In addition to data, users are able to access and modify configuration from any OPC-DA or OPC-UA compliant device or software, directly or remotely, without additional hardware or software.
LaserLinc chose to offer OPC Client functions to simplify commissioning of systems. Most OPC-UA compliant products, including sensors and PLCs, only offer Server functions, thus requiring a third-party gateway to bridge them. With its OPC Client, LaserLinc’s Total Vu HMI can drive communication directly.
- Related Portals:
- Advancing Automation using IIoT and Industry 4.0 Concepts, Systems Integration, Plant & Asset Management, OPC & OPC UA Interoperability, Manufacturing Operations Management, Process Instruments, Field Devices & IO, Process Automation, HMI & Operator Interfaces, Factory Automation, Test, Measurement & LIMS Portal
- Pages:
- Home Page
MORE PRODUCTS
-
GreyOrange releases Flexo modular sortation robotics system
The AI-enabled robotics system can be scaled to meet evolving business needs to handle large peaks, and reduced during non-peak hours. Flexo...
-
Optimal Engineering Systems releases the AY110-100V Vertical Rotation Stage
The AY110-100V Vertical Rotation Stage is suitable for: Metrology, positioning of mirrors and lasers, laser machining or scribing, micro robotics,...
-
Hexagon Manufacturing Intelligence releases HP-L-5.8 blue laser scanning sensor
The HP-L-5.8 is compatible with Hexagon CMMs that use PC-DMIS 2018 R2 and subsequent versions of the software and works with an automatic indexing...
-
Siemens announces NX software for Digital Innovation Platform
The ability to automatically adapt the user interface to meet the needs of different types of users across multiple departments can result in...
-
Applied Motion Products introduces MDX Integrated Servo Motors
The MDX on-board controllers utilize the same command interfaces as external motor controllers including CANopen, RS-485, Modbus, and Ethernet...
RELATED
-
Automation, Process Control & Instrumentation Pocket Guide
Engineers Pocket Guide from IDC Technologies covering Automation Using PLCs, SCADA and Telemetry Fundamentals, Process Control Fundamentals, and...
-
Manufacturing Automation - Inside Universal Robots Efforts to Empower the Small/Medium Enterprise
By Bill Lydon, Editor, Automation.com
Collaborative robots are re-defining the way manufacturers operate today. To help further that process is... -
Predicting the Future of Industrial Maintenance
By Gernut van Laak, Group Automation Solutions Leader, ABB Food and Beverage
The need for factory maintenance often goes unnoticed. This article... -
Northrop Grumman Corporation announces appointment Om Prakash as Chief Executive, Japan
As chief executive, Northrop Grumman Japan, Prakash will be responsible for ensuring effective performance on current programs, as well as...