Electrical & Control Panels
Falcon’s SC UPS models incorporate several important features including advanced digital signal processors (DSPs), surface mount device (SMD) technology, multi-mode operation, intelligent self-diagnostics and battery boost circuits.
The TET3000 is a 3000 W Titanium efficient front-end AC-DC power supply that converts standard AC mains power into a main output of 12 VDC for powering intermediate bus architectures (IBA) in servers, routers and network switches.
The MPO-60S family is fabricated on a 4.09 x 2.05 x 1.00 inch open PC board. All models are specified for operation over the operating temperature range of -25°C to +70°C (ambient).
Combining its cylindrical supercapacitors with its existing thin prismatics that address space-constrained designs, CAP-XX offers a range of small supercapacitors to power IoT industrial and consumer devices, from energy harvesting for wireless sensors to peak power support for wireless transmissions.
- Product Category:
- Proximity Sensors
- Related Portals:
- Advancing Automation using IIoT and Industry 4.0 Concepts, Electrical & Control Panels, Power & Energy
The TXP3500 Series of AC-DC converters employs a PFC front-end stage and an isolated DC-DC stage to convert the 3 Phase input voltage to a low DC output voltage in a broad array of industrial applications where efficiency is a requirement.
PMP Series Proportional SSRs can be used in a range of applications that require proportional power control, and they are a solution for lamp dimming and resistive heating control.
The power supply utilizes MOSFET to switch to battery operation with zero switch-over time in the event of failure/ disruption of the input AC power source.
TT Electronics’ QSOP-C and SOIC-C series resistor networks are designed for use in aerospace and ignal processing applications. Specific applications include flight computers, medical monitors and critical process monitors.
This instrument is available with up to 96 input channels and can record from two hours to 132 years of data—depending on the number of channels and frequency of data acquisition.
The RQH Series offers 10 Watts of fully regulated output power with railway input voltages of 24VDC (9-36 VDC), 48VDC (18-75 VDC), and 110VDC (40-160 VDC).
The ISL72813SEH driver leverages Intersil’s silicon on insulator process, which provides single-event latch-up (SEL) robustness in heavy ion environment.
The CBMC measures 36 mm wide and has four channels to protect against overload and short-circuit current in electrical applications. It is Phoenix Contact’s first circuit breaker to receive NEC Class 2 approval.
The international series AG transformers are especially suited for high inrush current and output voltage stability. This is typically the case when electromagnetic devices such a relays, motors, solenoids, contactors, bells, signals and alarm systems.
Available in 120-600VAC models and a 200kA short-circuit current rating, these devices are ideal for use in ANSI/UL Type 1 or 2 SPD installations, such as AC distribution, power supplies, drive protection, fire alarms, control panels, and more.
The SWM24 integrated steppers combine NEMA 24 step motors with a 6.0 A/phase (peak-of-sine) step motor drive.
Designed for applications such as ammeters, wattmeters, panel meters, instrumentation, and energy management systems, these current transformers offer a means of measuring primary current.
The 1630-2 FC is part of Fluke Connect allows technicians to view, record, and share measurements from the clamp and automatically upload them to Fluke Cloud storage along with tags and the GPS location of assets.
- Product Category:
- Analyzers & Monitors
- Related Portals:
- Electrical & Control Panels, Power & Energy, Test, Measurement & LIMS Portal, Advancing Automation using IIoT and Industry 4.0 Concepts
Emerson is targeting the UPS at industries that rely heavily upon robotics, factory automation, PLCs, conveying equipment, CNC machinery, and throughout the Industrial Internet of Things (IIoT) environment.
The System packaging process is a system designed also for those needing to pack special parts, and small to medium sized components, such as strips, hexagons, ribbed tiles and skirting panels.
Vanguard field-interchangeable gas sensor modules detect and record hydrogen sulfide (H2S) or methane (CH4) gas in parts per million (PPM) or percent of lower explosive limits (LELs) respectively, along with network and battery status.