PROFINET - View All Product News

PROFINET

Advanced Micro Controls releases SV160E2 Integrated Servo Motor
November 11, 2019

Advanced Micro Controls releases SV160E2 Integrated Servo Motor

AMCI’s SV160E2 Integrated Servo Motor includes an integrated dual port switch with EtherNet/IP, Modbus-TCP, & Profinet connectivity. The SV160E2 incorporates a servo motor, drive, and controller in a single unit.

Micro-Epsilon introduces IF2030/PNET interface module
September 30, 2019

Micro-Epsilon introduces IF2030/PNET interface module

Micro-Epsilon designed the IF2030/PNET interface module as a link to PROFINET controllers. Terminals enable sensors from Micro-Epsilon to be connected to this module via RS422/RS485 interfaces.

Port announces PROFINET and EtherNet/IP under GOAL
May 24, 2019

Port announces PROFINET and EtherNet/IP under GOAL

Both protocols run on top of the middleware GOAL, jointly enabling port.de customers for standard compliant PROFINET and EtherNet/IP communication.

Turck introduces FEN20-4IOL industrial Ethernet I/O module
April 24, 2019

Turck introduces FEN20-4IOL industrial Ethernet I/O module

The block offers four IO-Link channels. It is designed for a =range of industries, including manufacturing where space is at a premium, on robot end-effectors where small I/O is needed, and in automotive manufacturing and Tier 1 plants

Balluff introduces Device Integration IO-Link masters
April 01, 2019

Balluff introduces Device Integration IO-Link masters

The Device Integration IO-Link masters — BNI00E1 (Ethernet/IP) and BNI00AZ (Profinet) — feature 4x Type A IO-Link ports and 4x Type B IO-Link ports, each with up to 2A of output per channel to meet a wider range of requirements.

HELUKABEL introduces HELUKAT PROFINET Type R Torsion cable
March 26, 2019

HELUKABEL introduces HELUKAT PROFINET Type R Torsion cable

HELUKAT PROFINET Type R Torsion is rated Category 5e and offers transmission characteristics in EMI-heavy environments due to its double-shielding design that is suited for robotic applications that undergo continuous torsion loads.

Advanced Micro Controls introduces SD4840E2 integrated controller + drive
February 22, 2019

Advanced Micro Controls introduces SD4840E2 integrated controller + drive

The SD4840E2 integrated controller + drive communicates with the host PLC over the EtherNet/IP, Modbus-TCP, or Profinet network, and move commands are programmed through the host PLC’s software.

Schneider Electric Motion announces Profinet add-on instructions for Lexium MDrive (LMD) products
February 20, 2019

Schneider Electric Motion announces Profinet add-on instructions for Lexium MDrive (LMD) products

The AOIs work to reduce communications overhead by decreasing the work of integrating Lexium MDrive motor and electronics products into new and existing PLC programs.

Bronkhorst announces PROFINET interface for IN-FLOW Mass Flow Meters and Controllers
January 25, 2019

Bronkhorst announces PROFINET interface for IN-FLOW Mass Flow Meters and Controllers

In addition to the optional ATEX approval for use in Category 3, Zone 2 hazardous areas, the IN-FLOW series can now be offered with FM approval for Class I, Division 2, which is an important feature for the North American market.

Pepperl+Fuchs announces LB PROFINET gateway
January 22, 2019

Pepperl+Fuchs announces LB PROFINET gateway

In early 2019, Pepperl+Fuchs will launch the LB PROFINET gateway, delivering conventional PROFINET functionality and full access to all connected HART devices.

Mencom introduces Over-Molded Circular Connectors
December 14, 2018

Mencom introduces Over-Molded Circular Connectors

Mencom offers M12 and 7/8” threads circular connectors for the industrial Network solutions such as DeviceNet, Ethernet, Foundation Fieldbus, Profibus, and Profinet.

FieldComm Group announces  version 1.3.0 of FDI development tools with support for OPC UA server
November 29, 2018

FieldComm Group announces version 1.3.0 of FDI development tools with support for OPC UA server

By removing protocol dependencies, FDI enables sensor level data to be shared across the enterprise and enables big data analysis to provide deeper insights into user’s assets. The tools include; FDI Device Package Integrated Development Environment (IDE), and FDI Common Host Components (CHC).

HARTING introduces M12 connector in IEC 61076-2-111 standard K-coding
November 13, 2018

HARTING introduces M12 connector in IEC 61076-2-111 standard K-coding

In order to offer the M12 form factor to device manufacturers for voltage supply, HARTING will be supplying the K-coding with 7kW at 630V and 16A from Spring 2019, allowing the integrated transmission of data, signals and power.

Mencom introduces Protocol Gateway series of legacy integration solutions
October 30, 2018

Mencom introduces Protocol Gateway series of legacy integration solutions

The Protocol Gateway series is equipped with hardware platforms and software to manage the translation from protocol to protocol. They are designed to withstand environments with temperatures ranging between -40°C and +85°C degrees with up to 95% humidity.

Siemens announces Simocode pro V PN GP motor management system with Profinet connection
October 29, 2018

Siemens announces Simocode pro V PN GP motor management system with Profinet connection

The Simocode pro motor management system monitors, protects and controls constant-speed motors, and is equipped with predictive maintenance functions.

Endress+Hauser announces Memograph M RSG45 Advanced Data Manager DIN rail version
October 23, 2018

Endress+Hauser announces Memograph M RSG45 Advanced Data Manager DIN rail version

The Memograph M communicates with PLCs, SCADA systems, distributed control systems, historians and cloud-based data structures. It also has an embedded web server that can be accessed by any web browser via the internet once proper security procedures are followed.

WAGO introduces the PFC200 750-8208 PLC with PROFIBUS DP Master interface port
April 18, 2018

WAGO introduces the PFC200 750-8208 PLC with PROFIBUS DP Master interface port

The 750-8208 retains the size, memory and secure VPN and firewall. This PLC also comes equipped with two Ethernet ports, as well as CAN and Serial interfaces.

Phoenix Contact introduces FL SWITCH 2000 line of managed switches
April 10, 2018

Phoenix Contact introduces FL SWITCH 2000 line of managed switches

The 2000/2100 series gives machine builders a switch with multicast filter functions and redundancy mechanisms to reduce the data load in the network and maintain communications even in the event of a Layer 1 failure.

PROCENTEC announces PROCENTEC Mercury PROFIBUS and Industrial Ethernet diagnostics solution
April 06, 2018

PROCENTEC announces PROCENTEC Mercury PROFIBUS and Industrial Ethernet diagnostics solution

The PROCENTEC Mercury is a mobile tablet for delivery of PROCENTEC’s cross platform software package. This device is designed for troubleshooting, maintenance and monitoring Industrial Ethernet and PROFIBUS networks.

ABB introduces safety CPU modules for AC500/AC500-S programmable logic controller (PLC)
January 22, 2018

ABB introduces safety CPU modules for AC500/AC500-S programmable logic controller (PLC)

The modules, when used with ABB’s AC500/AC500-S programmable logic controller (PLC), feature the ability to exchange process and safety data, not only from one controller to multiple devices but also from one device to multiple controllers, using PROFINET/PROFIsafeshared device functionality.