Industrial Networks - View All Product News

Industrial Networks

Hexagon’s Manufacturing Intelligence division announces HxGN SFx | Asset Management software solution
December 18, 2019

Hexagon’s Manufacturing Intelligence division announces HxGN SFx | Asset Management software solution

The software unlocks the data typically siloed in individual coordinate measuring machines (CMM) to provide real-time insight into the performance, use and status of multiple CMMs across one or several sites.

PREMO announces  KGEA-MRHPM Series of  middle-range antennas for automotive RFID
December 02, 2019

PREMO announces KGEA-MRHPM Series of middle-range antennas for automotive RFID

The KGEA-MRHPM Series (mid-range antennae) have been designed to reduce the number of antennas compared to the total number short antennas with equal or better performance reading distance and H-field around the whole vehicle.

Posted in:
Tosibox announces TOSIBOX Lock for Container VPN software pilot with WAGO
November 27, 2019

Tosibox announces TOSIBOX Lock for Container VPN software pilot with WAGO

TOSIBOX Lock for Container is a software-only solution comparable to Tosibox’s previous hardware TOSIBOX Lock products. It enables users to integrate Linux-based IPCs, HMIs, PLCs, controllers or other devices into their TOSIBOX ecosystem and provide secure VPN connectivity to the host device where it is installed, and access to the LAN side devices connected to the host.

Lanner Electronics and Dispersive Networks announce integrated solution that merges Dispersive Virtual Network (DVN) software with uCPE platforms
November 26, 2019

Lanner Electronics and Dispersive Networks announce integrated solution that merges Dispersive Virtual Network (DVN) software with uCPE platforms

Lanner and Dispersive Networks have tested and validated an integrated solution that combines Lanner’s universal CPE equipment and Dispersive Networks’ flexible NFV and Container-based SD-WAN programmable networking software.

Advanced Micro Controls releases SV160E2 Integrated Servo Motor
November 11, 2019

Advanced Micro Controls releases SV160E2 Integrated Servo Motor

AMCI’s SV160E2 Integrated Servo Motor includes an integrated dual port switch with EtherNet/IP, Modbus-TCP, & Profinet connectivity. The SV160E2 incorporates a servo motor, drive, and controller in a single unit.

Westermo announces MRD-455-NA  4G router
November 07, 2019

Westermo announces MRD-455-NA 4G router

The MRD-455-NA is well suited to industrial applications where machine to machine communication is vital. It has a design with all interfaces and LEDs at the front, DIN-rail mounting, isolated power supply and an operating voltage range spanning from 10 to 60 VDC.

Endress+Hauser releases iTEMP TMT71 and TMT72 single-channel transmitters with wireless communication via Bluetooth
November 04, 2019

Endress+Hauser releases iTEMP TMT71 and TMT72 single-channel transmitters with wireless communication via Bluetooth

The transmitters are available with an integrated Bluetooth interface that enables users to wirelessly display measured values and perform configuration tasks. The device is operated using Endress+Hauser’s SmartBlue app.

Lanner introduces NCA-1513 desktop network appliance
October 31, 2019

Lanner introduces NCA-1513 desktop network appliance

The NCA-1513 features Intel’s QuickAssist Technology, offering cryptographic acceleration and commercial-grade LAN functions in a 231mm x 200mm x 44mm (WxDxH) form factor.

Antaira introduces managed low-port-count Version 2 (V2) hardware
October 21, 2019

Antaira introduces managed low-port-count Version 2 (V2) hardware

Antaira Technologies’ low-port-count managed switches are industrial-grade devices that are Ethernet ready to fulfill various markets’ edge-level networking applications in harsh and outdoor environments, such as manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation.

Posted in:
PCB Piezotronics announces Model 410C01 signal conditioner
October 17, 2019

PCB Piezotronics announces Model 410C01 signal conditioner

The Model 410C01 signal conditioner is set up using a software interface, and DIN rail mounting with standard 24 VDC power. It provides a broad frequency range and a zero reset that synchronizes with machine cycle times.

Horner Automation Group releases series of Micro OCS controllers
October 16, 2019

Horner Automation Group releases series of Micro OCS controllers

Designed for any simple application, the Micro OCS controllers can perform in multiple industries from water treatment, to food processing, to HVAC/Environmental control and many others.

SignalFire introduces PowerPAK on-demand power source for 4-20mA and HART field instrumentation
October 03, 2019

SignalFire introduces PowerPAK on-demand power source for 4-20mA and HART field instrumentation

The PowerPAK addresses the need for localized instrument power for new and existing applications when power is not readily available.

Micro-Epsilon introduces IF2030/PNET interface module
September 30, 2019

Micro-Epsilon introduces IF2030/PNET interface module

Micro-Epsilon designed the IF2030/PNET interface module as a link to PROFINET controllers. Terminals enable sensors from Micro-Epsilon to be connected to this module via RS422/RS485 interfaces.

Emerson and Cisco introduce Emerson Wireless 1410S Gateway with Cisco Catalyst IW6300 Heavy Duty Series Access Point
September 27, 2019

Emerson and Cisco introduce Emerson Wireless 1410S Gateway with Cisco Catalyst IW6300 Heavy Duty Series Access Point

This wireless access point provides wi-fi bandwidth necessary for real-time safety monitoring, including Emerson’s Location Awareness and wireless video. These applications are intended to enhance personnel safety practices, improve plant security and help ensure environmental compliance.

HEIDENHAIN announces ETEL-brand AccurET controls with EtherCAT compatibility
September 12, 2019

HEIDENHAIN announces ETEL-brand AccurET controls with EtherCAT compatibility

With an EtherCAT compatibility option, customers can utilize the controller without changing their whole existing communication architecture and machine software.

Posted in:
SignalFire Wireless Telemetry introduces DIN Gateway V2 900 mHz wireless gateway
September 11, 2019

SignalFire Wireless Telemetry introduces DIN Gateway V2 900 mHz wireless gateway

This gateway, designed for Class 1 Division 2 Groups C and D locations, supports wireless configuration up to 240 remote nodes at 3+ mile typical range and interfaces via RS-232 Modbus RTU or Modbus-TCP (Ethernet).

Lanner introduces NCA-6210 rackmount network appliance
September 09, 2019

Lanner introduces NCA-6210 rackmount network appliance

The NCA-6210’s NIC expansion slots and compatibility with F.A.S.T. module solutions make it a hardware solution for application delivery, mobile edge computing, WAN optimization, DPI/IPS/IDS, NFV/SDN and NGFW/UTM.

Tosibox announces North American launch of TOSIBOX Lock 150
September 06, 2019

Tosibox announces North American launch of TOSIBOX Lock 150

The Lock 150 can be installed in less than five minutes without the need for software installations, network configurations or special IT skills, and provides capacity for up to 10 concurrent VPN connections.

Balluff introduces EtherNet/IP IO-Link master block
September 03, 2019

Balluff introduces EtherNet/IP IO-Link master block

Balluff's EtherNet/IP IO-Link master block insulates against inductive, conductive, and capacitive noise produced by electromagnetic interference (EMI) and its housing protects against welding environments.

Posted in:
Treon intoduces Treon Industrial Node battery-operated condition monitoring device
August 29, 2019

Treon intoduces Treon Industrial Node battery-operated condition monitoring device

Treon Industrial Node is a battery-operated condition monitoring device that measures tri-axial vibration and surface temperature of rotating equipment, such as pumps, motors and agitators