Machine Tools, CNC & DNC - View All Product News

Machine Tools, CNC & DNC

Auburn Bearing & Manufacturing releases F series and FM series of miniature thrust ball bearings
February 14, 2019

Auburn Bearing & Manufacturing releases F series and FM series of miniature thrust ball bearings

The miniature thrust bearings found in these bearing series are typically manufactured in SAE 52100 chrome steel, and are available in bore sizes as small as 2 mm and as large as 18 mm and race ODs as small as 6 mm and as large as 20 mm

igus introduces E2.1 series of energy chain
February 14, 2019

igus introduces E2.1 series of energy chain

The E2.1 series offers filling of the e-chain from the side or top, along the inner or outer radius, with a chain opener or screwdriver. In this process, one meter of the e-chain can be opened in two seconds.

ARNO USA introduces Auto Fast Change (AFC) Tool Systems for Swiss-style machining
December 10, 2018

ARNO USA introduces Auto Fast Change (AFC) Tool Systems for Swiss-style machining

The ARNO AFC comes pre-configured with built-in through-coolant capabilities. In total, there are 5 inlets for porting the coolant on the AFC tool holder block that operators can use to direct coolant flow

Beck Automation introduces BASIC IML series of two cavity machine
October 23, 2018

Beck Automation introduces BASIC IML series of two cavity machine

The basic structure of the BASIC IML system comprises a machine frame. The rapid movements are made possible thanks to the machine frame and the use of servo motors made by Beckhoff.

NUM introduces TMX series of frameless torque motors
October 02, 2018

NUM introduces TMX series of frameless torque motors

NUM is initially launching two TMX series frameless torque motors, with stator diameters of 140 mm and 291 mm, and intends growing the range in the future

Siemens introduces Optimize MyMachining /Trochoidal application for Sinumerik Edge
September 19, 2018

Siemens introduces Optimize MyMachining /Trochoidal application for Sinumerik Edge

Optimize MyMachining /Trochoidal provides users with updates for the existing NC program, optimized machining processes, and sustainability for retrofit applications using dynamic machine data and corresponding data inputs

ANCA Motion introduces LinX M-series linear motor
August 29, 2018

ANCA Motion introduces LinX M-series linear motor

The LinX M-Series is fully compatible with standard pneumatics accessories such as mounting plates, linear guides and couplings.

GAM releases GPL zero-backlash planetary gearboxes
August 29, 2018

GAM releases GPL zero-backlash planetary gearboxes

The GPL series is available in seven sizes with ratios from 36:1 to 200:1. Output options for the GPL series include a solid flanged output (GPL-F) and a hollow shaft flanged output (GPL-H).

Sterling Systems & Controls announces Automated Bulk Bag Filling solution
August 09, 2018

Sterling Systems & Controls announces Automated Bulk Bag Filling solution

This automation and process control system includes a Motor Starter Process Control Panel. Included in this control panel is an Allen Bradley PLC with discrete and analog outputs, an Allen Bradley Panel View Plus 10” color touchscreen, and custom automation software to meet the application requirements.

Hatebur introduces HOTmatic AMP 20 N cam lobe manufacturing machine
July 27, 2018

Hatebur introduces HOTmatic AMP 20 N cam lobe manufacturing machine

To date, most of the forged cam lobes are produced on the two Hatebur machines HOTmatic AMP 30 S und 20 S. The machine has a total press load of 1500 kN. The machine body has been reinforced for stability.

Makino introduces Makino D200Z 5-axis vertical machining center
July 05, 2018

Makino introduces Makino D200Z 5-axis vertical machining center

Designed with an integral chuck to maximize work-zone volume and load capacity, the D200Z accommodates workpiece sizes up to 300mm in diameter and 210mm tall with weight up to 75 kg.

GAM releases  EPR and PER Series of right angle bevel planetary gearboxes
July 02, 2018

GAM releases EPR and PER Series of right angle bevel planetary gearboxes

Featuring a spiral bevel gear input to an inline planetary gear output, the EPR and PER are available in ratios of 3:1 to 1000:1 and a wide range of sizes and configurations.

Makino announces five axis a500Z horizontal machining center
June 25, 2018

Makino announces five axis a500Z horizontal machining center

The kinematic arrangement of the a500Z minimizes the force path lengths through both the spindle as well as through the workpiece, efficiently transferring both cutting loads and reactive forces into the machine’s three point leveled bed

Paxiom Group introduces PopLok VS series of automatic tray formers
June 07, 2018

Paxiom Group introduces PopLok VS series of automatic tray formers

The PopLok VS Series is capable of forming 1-tuck and 2-tuck trays at speeds of up to 600 trays per hour.

ARNO USA introduces SE grooving and part-off system
June 06, 2018

ARNO USA introduces SE grooving and part-off system

This cutting tool and insert system from ARNO USA is designed to optimize turning, grooving, parting-off and copy turning operations.

Mitsubishi Electric Automation introduces C80 Series CNC
May 14, 2018

Mitsubishi Electric Automation introduces C80 Series CNC

The C80 is suitable for rotary dial machines, production machines using multiple processes, and automotive transfer lines.

Posted in:
HEIDENHAIN introduces ND 5023 digital readout (DRO)
May 10, 2018

HEIDENHAIN introduces ND 5023 digital readout (DRO)

The DRO comes equipped with a TFT color display that enhances the readability of the information displayed over older models, plus features other design changes and enhanced functions.

GEFERTEC introduces GTarc additive manufacturing machines
April 03, 2018

GEFERTEC introduces GTarc additive manufacturing machines

GTarc machines manufacture near-net-shape metal parts. Only the finishing of the near-net-shape part is undertaken using standard CNC milling.

igus introduces guidelite vertical chain systems
March 29, 2018

igus introduces guidelite vertical chain systems

The guidelite vertical systems ensure that vertically moving energy chains in dynamic applications are safely held in place while moving at high speeds. The system’s open design is intended to reducs resonance and noise and allows cable system speeds to reach more than 7 meters per second.

LM76 introduces "New Design" pillow blocks and flange blocks
March 28, 2018

LM76 introduces "New Design" pillow blocks and flange blocks

The Pillow and Flange Blocks have been designed to accommodate an encapsulated ETX Scraper Seals that prevents contaminants from getting inside the bearing and retains the lubricant in the bearing.