ICP DAS introduces PET-7H16M data acquisition module with built-in Ethernet communication port

June 18, 2019 - ICP DAS USA's PET-7H16M is a data acquisition module with a built-in Ethernet communication port for network data transfer. It includes 8 analog input channels with a FIFO of 2048 samples and a maximum sampling rate of up to 200 kS/s, with 16-bit analog to digital (A/D) converters simultaneously sampling on each channel.In addition to the Analog input channels, each module provides 4 digital input and 4 digital output channels.

The module provides a programmable input range on all analog Input channels, and the Digital Output can be set to output with short-circuit and overload protection. The PET-7H16M series also provides 4 kV ESD protection as well as 2500 VDC intra-module isolation.

PET-7H16M supports three different trigger modes for A/D conversion: a software trigger, an external clock trigger, and an external digital signal event trigger (Post-trigger/Pre-trigger). The software trigger can acquire a sample whenever needed, and the continuous A/D acquisition, or the acquisition of N data samples, begins after the command is triggered. In external clock trigger mode, the speed of the A/D acquisition and the amount of data acquired are controlled by external electrical signals. In digital signal event trigger mode, the A/D acquisition parameters are configured by user commands and the A/D acquisition of the N data samples is triggered by an external electrical signal.

The PET-7H16M can be used for continuous data acquisition, high-speed interval acquisition, and simultaneous acquisition from multiple channels. With a maximum acquisition speed of 200 kHz for each AI channel. It is suitable for high-speed data acquisition of various mechanical, electronic and physical signals in industrial production, automatic control, electrochemistry, medicine, and more.