Oil & Gas - View All Product News

Oil & Gas

Rockwell Automation releases insulated bus option for Allen-Bradley CENTERLINE 2100 motor control centers
May 01, 2019

Rockwell Automation releases insulated bus option for Allen-Bradley CENTERLINE 2100 motor control centers

Suited for oil and gas operations, it is designed to eliminate the need to manually tape the splices onto the bus. This UL-listed option is available for NEMA MCCs up to 1600 A.

ABB announces ABB Ability Wellhead Manager
March 04, 2019

ABB announces ABB Ability Wellhead Manager

ABB Ability Wellhead Manager is cloud-based, so operators can gain insights about their production assets anywhere in the world. Remote workers can connect in real-time.

FCI announces 2019 version of ST51A Biogas Flow Meter
January 30, 2019

FCI announces 2019 version of ST51A Biogas Flow Meter

FCI’s thermal mass ST51A Biogas Flow Meter is designed specifically for dirty, potentially hazardous biogas processes.

Schaefer introduces the PBAF 690-560 liquid cooled active harmonic filter
November 26, 2018

Schaefer introduces the PBAF 690-560 liquid cooled active harmonic filter

The filter ensures a harmonic suppression independently of the number of loads and corrects the power factor. 140A AHF pluggable modules (4 per system) = 560A per cabinet and each filter module has its own complete control system.

Emerson introduces Roxar FSM Log 48 area corrosion monitor
September 27, 2018

Emerson introduces Roxar FSM Log 48 area corrosion monitor

The Roxar FSM Log 48 - with 48 referring to the number of pins in the sensing pin matrix - is a large-area, real-time remote pipeline monitoring solution capable of distinguishing between localized and generalized corrosion, a feature that helps reduce the need for pigging.

MOCON-Baseline introduces Series 9200 PetroAlert gas analyzer
January 12, 2018

MOCON-Baseline introduces Series 9200 PetroAlert gas analyzer

The Series 9200 is specifically engineered to meet the requirements of the oil and gas industry’s exploratory well-logging process. It is designed to allow well loggers monitoring a drill site to analyze the hydrocarbons within a well both quantitatively and qualitatively, while drilling.

Rockwell Automation releases Well Manager integration solution
November 10, 2017

Rockwell Automation releases Well Manager integration solution

The Well Manager solution is delivered pre-engineered to speed integration of a multi-well pad. It is scalable and can support up to 32 wells in one location with flow management, artificial lift control, and site-wide data visibility.

Honeywell releases Sensepoint XRL fixed gas detector monitors
November 03, 2017

Honeywell releases Sensepoint XRL fixed gas detector monitors

The Sensepoint XRL fixed gas detector monitors industrial operations for specific hazardous gases, such as carbon monoxide or methane. Sensepoint XRL is Bluetooth-enabled, meaning it can be set up and maintained remotely using a smartphone app.

Emerson releases PolyOil JAR Handling Clamp
August 16, 2017

Emerson releases PolyOil JAR Handling Clamp

The PolyOil JAR Handling Clamp acts a safety device to prevent the jar from cocking and firing. Applications for the new JAR Handling Clamp include drilling, drill stem testing (DST) jars, coil tubing and wireline applications.

Lapp Group announces EPIC ULTRA H-A ¾ model of connector housing and EPIC ULTRA H-B cover
July 18, 2017

Lapp Group announces EPIC ULTRA H-A ¾ model of connector housing and EPIC ULTRA H-B cover

Together, these corrosion-resistant materials make the connector a fit for applications including wind turbines, washdown machinery, offshore equipment, chemical processing lines, telecommunication installations and many other heavy industrial equipment.

Emerson introduces Rosemount CT5800 continuous gas analyzer
July 12, 2017

Emerson introduces Rosemount CT5800 continuous gas analyzer

The CT5800 analyzer's cell design enables measurement of concentrations of impurities down to low ppm levels in the gas streams with linearity of response and repeatability, and incorporates up to six laser modules housed inside the same enclosure.

FCI announces enhancements to FLT93 flow switch series
July 11, 2017

FCI announces enhancements to FLT93 flow switch series

The enhanced FLT93 Flow Switch is suitable for flow detection of liquids or gases and is available in several wetted materials for compatibility with virtually any fluid

Servomex introduces SERVOPRO NOx analyzer
July 11, 2017

Servomex introduces SERVOPRO NOx analyzer

These analyzers offer a solution for monitoring NO, NO2, NOx, SO2, methane, total hydrocarbons, and non-methane hydrocarbons in stationary and mobile source emissions applications that require low level emissions monitoring.

ABB introduces PGC5000 gas chromatograph oven w/ integrated controller
July 10, 2017

ABB introduces PGC5000 gas chromatograph oven w/ integrated controller

The PGC5000 oven with an integrated controller offers a solution by integrating the single board computer (SBC) directly into the PGC5000B or PGC5000C gas chromatograph ovens.

Seeq introduces Seeq integration module for Inductive Automation's Ignition SCADA system
June 28, 2017

Seeq introduces Seeq integration module for Inductive Automation's Ignition SCADA system

The Seeq integration module is designed to simplify integration of Seeq Workbench into Ignition displays and server gateways. Ignition customers in manufacturing, mining, pulp & paper, food & beverage, and other process industries use Seeq Workbench to find insights in their data.

Honeywell releases Q.Sonicmax  ultrasonic gas flow meter
June 23, 2017

Honeywell releases Q.Sonicmax ultrasonic gas flow meter

Q.Sonicmax’s design features the first eight-path ultrasonic meter to combine both reflective and direct paths. This enables Q.Sonicmax to detect and correct for disturbances in the gas flow caused by short inlets, extenders, reducers, manifolds, elbows and a range of other piping elements common in natural gas plants.

Alliance Sensors Group introduces SS-7 series of linear variable inductive transducers (LVIT)
May 12, 2017

Alliance Sensors Group introduces SS-7 series of linear variable inductive transducers (LVIT)

The SS-7 is designed to be embedded into a hydraulic cylinder and utilizes the gun-drilled piston rod as a target, sensing it’s position with-out the need for a magnet.

Posted in:
Product Category: 
General Sensors
Related Portals:
Sensors & Industrial I/O, Factory Automation, Oil & Gas
ABB introduces PGC process gas chromatograph
May 05, 2017

ABB introduces PGC process gas chromatograph

The PGC5009 represents process analytics for simulated distillation analysis using fast temperature programmed process chromatography.

Yokogawa announces enhanced version of STARDOM network-based control system
May 05, 2017

Yokogawa announces enhanced version of STARDOM network-based control system

This latest version supports Windows 10, and the STARDOM CPU module comes with a new function that enables Java applications to run on a STARDOM controller. In addition, an oil flow rate calculation function has been added to meet the needs of oil and gas well operations.

AW-LAKE COMPANY introduces the MicroTRICOR TCM-100 Coriolis Mass Flow Meter
April 07, 2017

AW-LAKE COMPANY introduces the MicroTRICOR TCM-100 Coriolis Mass Flow Meter

This mass flow meter is suitable for dosing, blending and batching in applications such as chemical injection, precision painting and coating applications, and batch processing associated with liquid or gas handling and dispensing.