E+E Elektronik announces EE820 sensor

April 18, 2019 - The EE820 sensor from E+E Elektronik is appropriate for monitoring the CO2 concentration in harsh and polluted applications such as agriculture and life stock barns. Beside voltage and current output, the sensor is now also available with RS485 interface with Modbus RTU or BACnet MS/TP protocol.
The operation of the EE820 is based on the E+E dual-wavelength NDIR principle, which is insensitive to contamination and automatically compensates for aging effects. The multi-point CO2 and temperature factory adjustment procedure ensures CO2 measurement accuracy over the entire temperature range -20…60 °C (-4…140 °F).
The EE820 features an IP54 enclosure with a special filter, which offers protection of the measurement electronics in harsh and polluted environment. The functional enclosure facilitates mounting the sensor with closed cover. Thus, the electronics is safe from mechanical damage and construction site pollution during installation.
For response time to changes in CO2, the EE820 is optionally available with a forced air circulation module installed behind the filter.
The measured data with range up to 10000 ppm CO2 is available on the analogue output (voltage / current) or on the RS485 interface with Modbus RTU or BACnet MS/TP protocol.
An optional adapter and the free EE-PCS Product Configuration Software facilitate the configuration and adjustment of the EE820.
MORE PRODUCTS
-
ProKNX announces Aragon offline voice control system
With an existing compatible home automation system in place, the user would typically install one Aragon device in each room where voice control is...
-
Eastey introduces EXS-100 semi-automatic strapping machine
The semi-automatic EXS-100 strapping machine is designed to apply a plastic strap around user’s packages, preventing them from opening during...
-
MB Dynamics announces industry-exclusive Test Engineering Services
MB’s engineering services are divided into three main groups: test engineering services; field service; and test laboratory support. All are...
-
Pepperl+Fuchs offers IO-Link masters with OPC UA interface
By combining OPC UA and IO-Link, Pepperl+Fuchs has opened up possibilities for end-to- end, transparent, communication from the lowest field level...
-
EPLAN announces EPLAN eBuild cloud software for generating electrical schematics or fluid power...
Register with EPLAN ePulse, then open a project, select the tasks and, at the click of a mouse, the software configures schematics based on EPLAN...
RELATED
-
Automation, Process Control & Instrumentation Pocket Guide
Engineers Pocket Guide from IDC Technologies covering Automation Using PLCs, SCADA and Telemetry Fundamentals, Process Control Fundamentals, and...
-
ABB uses swimming robots to help Australian silicon company enhance transformer inspections
Simcoa Operations sought the expertise of the local ABB Transformer Service team in Australia to perform an internal inspection for one of their...
-
Sager Electronics announces UL508A certification of Power Solutions Center in Texas
UL 508A certification is an industrial control panel directive certifying an assembly meets the standards of electrical inspection.
-
Augmented Intelligence
By Mark Howard, EU Automation
Augmented intelligence is one of the few technologies named on the Gartner Hype Cycle for Emerging Technologies,...