VDMA OPC Machine Vision Initiative and OPC UA Foundation announce OPC UA demonstrator

November 15, 2019 - As part of a joint project, members of the VDMA OPC Machine Vision Initiative together with the OPC UA Foundation, have developed a hardware demonstrator that includes the practical implementation of the "OPC UA for Machine Vision (OPC MV) Part 1 Companion Specification".
OPC MV Part 1 describes an abstraction of the generic image processing system, i.e. a representation of a so-called "digital twin" of the system. It handles the administration of recipes, configurations and results in a standardized way, while the contents remain manufacturer-specific and are treated as a black box. The demonstrator establishes an infrastructure layer that enables a simplified and uniform integration of all possible image processing systems into higher-level IT production systems (PLC, SCADA, MES, ERP, Cloud, ...). It demonstrates the generalized control of a vision system and abstracts the necessary behavior via the concept of a "state machine".

Check out our free e-newsletters
to read more great articles.
- Posted in:
- Resources
- Related Portals:
- Plant & Asset Management, OPC & OPC UA Interoperability, Manufacturing Operations Management, Vision, Sensors & Industrial I/O, Factory Automation
MORE RESOURCES
-
ODVA announces enhancements to EtherNet/IP Specification
The published enhancements to The EtherNet/IP Specification outline integration of NAMUR NE 107 diagnostics for process automation into CIP...
-
IDTechEx Report: Autonomous cars could accout for 4 trillion miles of road travel by 2040
IDTechEx has recently seen competitors joining hands and forming some unlikely-sounding alliances to reduce the cost of autonomous driving...
-
Phoenix Contact releases firmware 2.05.1 for TC Router product range
The TC Router permits remote access to SCADA networks and control systems over the cellular network. Since these networks typically involve...
-
Interact Analysis releases The Low Voltage AC Motor Drives Market – 2019 report
The research shows that growth in the intralogistics and materials handling sector has led to increased demand for decentralised and motor mounted...
-
NK Technologies releases Ground Fault Considerations Tech Guide
The Ground Fault Considerations Tech Guide covers a wide range of topics and includes a selection guide, as well as a variety of case studies and...
RELATED
-
B&R and ABB announce integration of robotics and automation solutions
With the ability to offer machine flexibility and precision, merging robotics with machine control into one unified architecture will enable...
-
The Push and Pull of Composite Manufacturing
By Robert Glass, Exel Composites
From window and door manufacturers to the professional tree surgeon, weighing up material options usually comes... -
ABB uses swimming robots to help Australian silicon company enhance transformer inspections
Simcoa Operations sought the expertise of the local ABB Transformer Service team in Australia to perform an internal inspection for one of their...
-
Sager Electronics announces UL508A certification of Power Solutions Center in Texas
UL 508A certification is an industrial control panel directive certifying an assembly meets the standards of electrical inspection.
-
Augmented Intelligence
By Mark Howard, EU Automation
Augmented intelligence is one of the few technologies named on the Gartner Hype Cycle for Emerging Technologies,...