Process Instruments, Field Devices & IO - View All Product News

Process Instruments, Field Devices & IO

EXAIR introduces 1/8 NPT siphon fed spray nozzles
December 10, 2019

EXAIR introduces 1/8 NPT siphon fed spray nozzles

With EXAIR’s siphon fed atomizing nozzles, users can coat, lubricate, cool, treat and paint a variety of products using compressed air and liquids with a viscosity of up to 200 centipoise. Used with water, atomizing nozzles are a way to evenly cool hot items in an automated process.

Analytical Systems Keco introduces Series 150-Lab H2S Analyzer
December 05, 2019

Analytical Systems Keco introduces Series 150-Lab H2S Analyzer

Used in inspection labs, gas terminals, the food and beverage industry and refineries, the Series 150-Lab H2S Analyzer is capable of precision gas measurement in the low, single-digit PPB to high PPM levels.

AMETEK Process Instruments introduces WDG-V UOP/RP analyzer for oxygen measurement
December 03, 2019

AMETEK Process Instruments introduces WDG-V UOP/RP analyzer for oxygen measurement

Designed for SIL-2 safety systems, the upgraded electronics provide an additional layer of safety to ensure operation. The electronics also connect to the AMEVision HMI Host Display for a graphical user interface and additional digital communications.

Emerson introduces Rosemount MS Slurry Sensor with Rosemount 8782 Slurry Transmitter
December 03, 2019

Emerson introduces Rosemount MS Slurry Sensor with Rosemount 8782 Slurry Transmitter

The Slurry Magnetic Flow Meter, or Slurry Mag, provides a flow measurement solution for customers with fluids that contain large solids, mining ore, pulp or sand, or that experience high process noise or signal instability.

Pepperl+Fuchs introduces 6100 series purge and pressurization system
November 27, 2019

Pepperl+Fuchs introduces 6100 series purge and pressurization system

The 6100 series is a fully automatic system that does not require an operator to initiate purging or pressurization. It offers optional temperature sensors that can be mounted around the motor for alarm notification or cooling. Additionally, there is automatic pressure compensation for excess leakage from the motor.

Siemens introduces 7KM PAC3220 and 7KM PAC3120 measuring devices to Sentron power monitoring portfolio
November 25, 2019

Siemens introduces 7KM PAC3220 and 7KM PAC3120 measuring devices to Sentron power monitoring portfolio

The 7KM PAC 3220 devices are designed for sophisticated energy management operations in industrial environments. They can be used in any 50 Hertz (Hz) and 60 Hz grids and measure electrical parameters such as voltage, phase current and frequency as well as active, reactive and apparent power.

Rockwell Automation announces enhanced version of FactoryTalk Batch software
November 25, 2019

Rockwell Automation announces enhanced version of FactoryTalk Batch software

A key feature of the release is the ability to make online edits for plant areas which require a high degree of control and flexibility while remaining in production. As needs change or as custom recipes are introduced, operators can make changes without having to take portions of the system offline or placing the batches on hold.

Emerson introduces Daniel V707 back pressure control valve
November 22, 2019

Emerson introduces Daniel V707 back pressure control valve

The V707 is based on the trusted Daniel 700 Series valve design which includes a metal to metal seat and protected O-rings to handle harsh crude oil conditions. While users have to stop operations to maintain and replace diaphragm valves, the V707 will ensure minimum maintenance.

Posted in:
United Electric Controls announces addition of ammonia and hydrocarbons sensors to Vanguard WirelessHART Gas Detector
November 20, 2019

United Electric Controls announces addition of ammonia and hydrocarbons sensors to Vanguard WirelessHART Gas Detector

WirelessHART Vanguard Gas Detectors interface with existing networks to provide continuous coverage while working to reduce the cost of detecting toxic and combustible gases

Endress+Hauser and Softing announce combination of Softing's mobiLink interface with Endress+Hauser's Field Xpert
November 15, 2019

Endress+Hauser and Softing announce combination of Softing's mobiLink interface with Endress+Hauser's Field Xpert

The combination of Softing's mobiLink interface with the Field Xpert SMT70 or SMT77 Tablet PC from Endress+Hauser offers users a system solution for configuring and parameterizing field devices for the most important process automation protocols - HART, PROFIBUS PA and FOUNDATION Fieldbus

FCI releases Wet Gas MASSter Sensor for the ST80 Series Flow Meters
November 14, 2019

FCI releases Wet Gas MASSter Sensor for the ST80 Series Flow Meters

FCI's wet gas (WG) sensor delivers gas flow measurement in the presence of moisture and condensation droplets. Available with the Model ST80, this WG sensor can be applied for use in entrained moisture and rain-shielding applications.

Siemens introduces Reyrolle 5 series of protection relays
November 13, 2019

Siemens introduces Reyrolle 5 series of protection relays

The first device applications of the protection relay will be overcurrent and earth fault protection and transformer protection in substations.

Nordson ASYMTEK introduces Vortik Series of pumps
November 12, 2019

Nordson ASYMTEK introduces Vortik Series of pumps

Three pump families in the Vortik series - VPs, VPm, and VPg - are based upon general volume ranges, and each includes models for dispensing one-component (1K) and two-component (2K) fluids.

Posted in:
Siemens announces V8.0 of Braumat brewery process control system
November 12, 2019

Siemens announces V8.0 of Braumat brewery process control system

In order to enhance the reporting options, a batch report with a basic choice of process parameters has been integrated. Users can now create reports with the help of MS Excel. Braumat V8.0 is also now connected to the established PM- Quality option.

PCB Piezotronics releases Models 421B30, 421B31 and 421B3X differential charge amplifiers
November 11, 2019

PCB Piezotronics releases Models 421B30, 421B31 and 421B3X differential charge amplifiers

The products were developed for use in power generation turbine research & development and rotating asset monitoring in nuclear facilities.

Emerson announces Roxar 2600 Multiphase Flow Meter Performance Monitoring service
November 11, 2019

Emerson announces Roxar 2600 Multiphase Flow Meter Performance Monitoring service

The Roxar 2600 Multiphase Flow Meter Performance Monitoring service provides operators with actionable recommendations to optimize meter performance and enable proactive maintenance, based on continuous data collected from an onsite multiphase flow meter and analyzed remotely by Emerson’s experts.

Fluke announces addition of shortwave sensors to Thermalert 4.0 series of spot pyrometers
November 07, 2019

Fluke announces addition of shortwave sensors to Thermalert 4.0 series of spot pyrometers

With three spectral models–measuring at wavelengths of 1 µm, 1.6 µm, and 2.3 µm, respectively–the full Thermalert 4.0 lineup can measure temperatures between -40°C and 2,300°C and is ideal for applications where non-contact temperature monitoring is critical, such as metal, steel, or glass.

Siemens announces launch of Sirius 3RW55 Failsafe and Sirius 3RW50 soft starters
November 06, 2019

Siemens announces launch of Sirius 3RW55 Failsafe and Sirius 3RW50 soft starters

The Sirius 3RW55 Failsafe soft starters are suited for starting and stopping operations of high-power motors with a rated output of 5.5 to 560 kilowatt (kW) at 400 volts (V).

AutomationDirect announces ProSense VFS series vortex flow sensors
November 05, 2019

AutomationDirect announces ProSense VFS series vortex flow sensors

Vortex flow sensors are intended as a method for measuring flow of water-based liquids that is independent of the liquid's pressure or temperature fluctuations.

Endress+Hauser releases iTEMP TMT71 and TMT72 single-channel transmitters with wireless communication via Bluetooth
November 04, 2019

Endress+Hauser releases iTEMP TMT71 and TMT72 single-channel transmitters with wireless communication via Bluetooth

The transmitters are available with an integrated Bluetooth interface that enables users to wirelessly display measured values and perform configuration tasks. The device is operated using Endress+Hauser’s SmartBlue app.