Process Automation - View All Product News

Process Automation

Beckhoff Automation has announced the AMP8620 supply module
April 25, 2019

Beckhoff Automation has announced the AMP8620 supply module

With the AMP8620 supply module’s IP 65 protection rating and consistent decentralization, the entire motion system can now be mounted directly on the machine.

Emerson and Metrol introduce Intelligent Multistage Completion Network
April 25, 2019

Emerson and Metrol introduce Intelligent Multistage Completion Network

The Intelligent Multistage Completion Network is an integrated upper and lower completions downhole solution that communicates wirelessly with instruments at the reservoir sandface, the physical interface between the formation and the wellbore

AMETEK Drexelbrook announces DRX400 (24 GHz) and DRX500 series (80 GHz) level transmitters
April 25, 2019

AMETEK Drexelbrook announces DRX400 (24 GHz) and DRX500 series (80 GHz) level transmitters

Both series of products feature a backlit LCD screen with 4-button keypad that can be assessed with a bar magnet without opening the housing cover. Each uses software that has a quick set up assistant for installation.

Micro-Epsilon introduces wireSENSOR MT19 raw-wire displacement sensor
April 25, 2019

Micro-Epsilon introduces wireSENSOR MT19 raw-wire displacement sensor

With a weight of 8 g and a size of 19 x 19 mm, Micro-Epsilon’s wireSENSOR MT19 is used for displacement and distance measurements with a measuring range of 40 mm.

Turck introduces FEN20-4IOL industrial Ethernet I/O module
April 24, 2019

Turck introduces FEN20-4IOL industrial Ethernet I/O module

The block offers four IO-Link channels. It is designed for a =range of industries, including manufacturing where space is at a premium, on robot end-effectors where small I/O is needed, and in automotive manufacturing and Tier 1 plants

ATLANTA Drive Systems introduces Z-Series, L-Series & I-Series of stainless steel washdown gearboxes
April 24, 2019

ATLANTA Drive Systems introduces Z-Series, L-Series & I-Series of stainless steel washdown gearboxes

The gearboxes are available inreduction ratios from 5:1 to 102:1, with output torque capacities up to 480 lb.ft. and input powers up to 5.4 hp. Stainless steel motors are also available for use with these gearboxes.

Pepperl+Fuchs introduces M-LB-2000 surge protection system
April 24, 2019

Pepperl+Fuchs introduces M-LB-2000 surge protection system

The M-LB-2000 can also be used as an alternative to terminal blocks with surge protection. The terminal blocks can be replaced by the 6.2 mm slim modules with no additional space required.

ITT's Gould Pumps introduces ITT Goulds Pumps IC Open (ICO) Impeller i-FRAME pump
April 22, 2019

ITT's Gould Pumps introduces ITT Goulds Pumps IC Open (ICO) Impeller i-FRAME pump

Engineered to handle chemical slurries and waste liquids, as well as food and beverage applications, the ICO augments the standard IC pump design with an open impeller for performance handling solids

Posted in:
Servo2Go introduces SSP Series washdown servo gearboxes
April 22, 2019

Servo2Go introduces SSP Series washdown servo gearboxes

It is a precision inline planetary gearbox outwardly constructed of 300-series stainless steel. The motor adapter plate, housing and shaft are all stainless steel.

Binder USA releases the Series 696 HEC (Harsh Environment Connector)
April 19, 2019

Binder USA releases the Series 696 HEC (Harsh Environment Connector)

The binder Series 696 HEC was developed specifically for use in challenging environments. A3-point bayonet locking mechanism and binder’s lightweight plastic design ensures that the connectors are highly resistant against climatic conditions, chemical substances, and other industrial hazards.

Advantech releases ICR-3211B LTE Cat-M1 router
April 19, 2019

Advantech releases ICR-3211B LTE Cat-M1 router

The combination of in-building communication and redundant power makes the ICR-3211B a choice for building automation, energy management and remote SCADA applications.

E+E Elektronik announces EE820 sensor
April 18, 2019

E+E Elektronik announces EE820 sensor

The EE820 sensor from E+E Elektronik is appropriate for monitoring the CO2 concentration in harsh and polluted applications such as agriculture and life stock barns.

Balluff introduces BFT temperature sensors
April 18, 2019

Balluff introduces BFT temperature sensors

Depending on the version, the BFT sensors provide PNP switching outputs, analog signals 0...10V /4...20mA or work as a PT1000 sensor. They are simple to install by threading into the process using a standard process connection with G- and NPT threads. Integrating them requires a 4-pin M12 plug on the sensor.

FLIR introduces FLIR Thermal Studio thermal image analysis and reporting software
April 17, 2019

FLIR introduces FLIR Thermal Studio thermal image analysis and reporting software

FLIR Thermal Studio offers measurement functions, formula capability, and custom analysis templates for professional thermographers. This program allows tuning of entire batches of thermal photos or videos with a few clicks.

Endress+Hauser introduces Proline Promag W 300/500 electromagnetic flowmeter
April 16, 2019

Endress+Hauser introduces Proline Promag W 300/500 electromagnetic flowmeter

The Promag W flowmeters feature all options to fulfill the requirements of the water and wastewater industry. They possess the necessary custody transfer approvals, Ex approvals as well as IP68 for underwater and buried installations.

Continental Control Systems introduces WattNode Wide-Range Modbus meter
April 12, 2019

Continental Control Systems introduces WattNode Wide-Range Modbus meter

The model operates from 85 Vac to 690 Vac on wye, delta, single-phase, and three-phase services

S. Himmelstein and Company announces Model 700+ series signal conditioning instruments
April 11, 2019

S. Himmelstein and Company announces Model 700+ series signal conditioning instruments

They feature user settable digital filters, real-time cross channel calculations, built-in data acquisition and control functions, serial communications interface, user assignable logic I/O and auto-scaled ±5 and/or ±10 volt analog outputs.

SensoPart introduces FT 55-RLAM triangulation sensor
April 11, 2019

SensoPart introduces FT 55-RLAM triangulation sensor

Equipped with an analogue output, two switching outputs, an IO-Link interface and optional RS485 interface, the sensor offers connectivity.

ZYFRA Group announces successful test of AI equipped electrical submersible pump
April 11, 2019

ZYFRA Group announces successful test of AI equipped electrical submersible pump

The unit recommends a mode of well operation that will ensure maximum oil flow rate for a certain period of time and provides for stable operation during that period by analyzing current frequency, gauged oil flow rate, periods of intermittent pump operation and other operating parameters.