Endress+Hauser Announces Water Sampling Solutions
The units accept “hot plug and play” inputs from up to two Endress+Hauser’s Memosens digital sensors to measure parameters such as nitrates, conductivity, oxygen, pH, ORP turbidity or suspended solids. The same unit can be used to simultaneously measure multiple parameters just by changing sensor types. Each sensor simply plugs into a unit and can be configured from the multilingual display using PC-like menus. Each unit can store up to 100 programs, and can run up to 24 programs at a time.
In addition to the two Memosens digital inputs, base units come with two analog inputs, two binary inputs, two binary outputs, backlit display, SD card and a CDI-interface. The stationary unit can be supplied with 17 different bottle configurations, and the portable unit can be supplied with six different bottle configurations. A base unit can be updated by the user in the field into a complete monitoring and sampling station.
Typical analog inputs could be from a flowmeter, a rain gauge or any other measuring device with an analog output. Typical binary inputs could be pulses from a flow meter where each pulse represents a certain volume.
For the stationary unit, options also include a choice of interchangeable sample pumping technologies: vacuum or peristaltic. The portable unit is only available with a peristaltic pump. The pumps are simple to maintain and require no tools for routine maintenance. The peristaltic pump meets the EPA’s recommended linear velocity of 2 ft/s (0.6 m/s) at up to 26.3 ft (8 m) head height.
The sample volume can be adjusted from 10 to 9999 ml. Sampling can be programmed to occur based on time, flow or flow-paced time override. The suction line can be rinsed up to three times. Options are available for sampling from pressurized pipes.
Sample bottles are kept in temperature-controlled storage in a two-door housing for reliable temperature regulation. Dual-bottle trays make it easy to retrieve, replace and transport samples to the lab. Bottles are available in sizes from 1 liter to 30 liters, in plastic or glass. All parts that transport liquid including the distribution arm, the dosing system and the distribution plate can be removed and cleaned easily without the need for additional tools.
The UL/CSA/CE approved 24Vdc power supply is standard, battery backup is optional. The compact cooling system provides cooling efficiency to reach EPA recommended storage temperature of 39°F (4°C). Sample temperature can also be monitored. The modular cooling unit is easy to access due to its mounting location above the sample storage compartment.
Multiple housing materials are available to meet the requirements of demanding applications, while cost-effective materials are used for standard applications.
AAEON announces the FWS-7821 intelligent security appliance
The FWS-7821 is capable of supporting a range of configurations to ensure deployment in network environments. The SDK further enables customization...
Bel Power Solutions introduces 0RQB-X0S10BG regulated bus converter
The isolated DC-DC converter incorporates digital control, secondary side synchronous rectifiers and a thermal management system, allowing for...
SignalFire introduces Hatch Watchdog tank hatch monitoring sensor
The Hatch Watchdog is a wireless thief hatch sensor that monitors the status of tank hatches to mitigate environmental and safety risks associated...
AutomationDirect announces design improvements for Bryant watertight line of plugs
Design improvements include a cone seal that prevents water from accumulating at the cable entrance; rugged PBT (Polybutylene terephthalate)...
MicroPower Direct releases MPM-10SV of 10W AC/DC power supplies
The MPM-10SV series is a solution for a variety of industrial & commercial applications. With its input range, the MPM-10SV series as a good choice...
Rockwell Automation to focus on digital transformation and Industrial IoT at Hannover Messe 2017
Rockwell Automation will be showcasing the technologies, solutions and services that can help companies successfully and securely take advantage of...
FieldComm Group seeks nominees for 2017 Plant of the Year Award
The FieldComm Group Plant of the Year is an international award presented to end user companies in the process automation industry to recognize the...
Yokogawa of America announces Shuji Mori as CEO
In the role of CEO, Mr. Mori will be responsible for all day-to-day business operations in North America. Mr. Mori began his career as an engineer,...
Advanticsys wireless sensors help to reduce UK traffic pollution
The project aimed to test the feasibility of developing an integrated data platform for Chester city centre. The focus was on linking a novel air...
ABB chooses Omnify PLM software to enhance design processes
ABB Drives and Controls was lacking a component information management system with a centralized database for their Printed Circuit Board Assembly...