Falcon Electric introduces SSG Series industrial UPS
The SSG Series ability to withstand extreme temperatures typically found in factory and industrial environments give users more flexibility in deploying power protection devices for these applications, said Michael Stout, vice president of engineering at Falcon Electric. The SSG Series UPS can be placed in an equipment rack or installed as a stand-alone tower on the manufacturing floor, in close proximity to the critical load. This eliminates the need to shield the UPS from the environment. This point-to-point installation strategy saves users the time and effort required to configure and wire elaborate power distribution for the various devices that need protection and dramatically lowers the cost of installing the UPSes.
The SSG Series also provides users an improved level of battery monitoring and replacement notification, as well as user-friendly, hot-swappable battery packs, which are the most elegant in their class. Slide-out battery packs are easily replaced through the UPS front panel, without having to remove the UPS from the equipment rack, eliminating the handling of individual batteries and the associated wiring hassles.
The SSG Series also gives users the ability to program two independent output Load Segments. This feature is designed to extend the battery runtime for a specified pair of receptacles for a particular connected device such as a controller while cutting off the power to the remaining receptacles after a utility loss or low battery condition. For applications that require hours of back-up, additional battery banks can be ordered and configured easily with included cables through a connector located on the back panel. Battery packs are available that include an optional internal charger to maintain a reasonable recharge time.
The SSG Series regenerative true double-conversion on-line topology is designed to give users the highest level of protection against a wide spectrum of power problems. It provides a continuous, clean, tightly regulated power source from the most polluted incoming AC power source. Unlike off-line and line-interactive UPS designs, the SSG Series acts as an electronic firewall between incoming dirty power and sensitive micro-processor-based Programmable Logic Controllers (PLCs), computers and automated systems found in these industrial environments.
For unattended OS shutdown and easy monitoring of the UPS system, Falcons UPSilon shutdown and management software supports Windows platforms, including Vista, as well as Novell NetWare 5 & 6, LINUX and FreeBSD. For remote management, users may purchase an optional SNMP/HTTP agent board that installs directly inside the UPS and provides a TCP-IP addressable, 10/100 Ethernet communications for remote monitoring and management. To assure easy integration into industrial and large IT installations, the SSG Series features Remote Emergency Power Off (REPO) with NFPA-70, NEC 645-11 compliant operation.
Pricing for the SSG Series starts at $1,390 for the 1.5kVA model (SSG1.5KRM-1). The SSG Series is easily configured as a rackmount or tower UPS and can be purchased from Falcon Electric directly or from a local distributor.
About Falcon Electric:
Headquartered in Irwindale, Calif., Falcon Electric, Inc. is a leading supplier of award-winning power protection and conversion solutions. For almost two decades, Falcon has been dedicated to offering the latest in technology, superior engineering standards, unmatched technical support and customized solutions. Falcon manufactures power systems that meet the exacting standards of the government, financial, telecom, computer, automation and other industries that demand the highest product reliability to meet their critical power needs.
RS Components announces addition of 39 products to its range of laser-diode modules
The products include interchangeable pattern optics to enhance the existing LaserLyte Flex range for the projection of lines, crosses and grids. A...
ULVAC introduces NA-1500 dry etching system for 600mm advanced packaging substrates
While there are many 200mm/300mm wafer dry etching systems in the market today, there was no dry etching system for 600mm substrate, providing for...
Axiomtek introduces P1197E-500 19" touch panel computer
The CE-certified 19-inch expandable human machine interface supports up to 32 GB system memory of dual-channel DDR4-2133 to deliver computing...
Zero-Max releases Model 650 overhung load adaptor
OHLA applications include pump drives, forestry shredders, recycling systems, fan drive for heat exchanges, conveyor drives, off road construction...
AMS/Acam introduces TDC-GPX2 time-to-digital converter
The device delivers up to 70 mega-samples per second – for drones, radar, LIDAR, PET scanner, automatic test equipment (ATE), photon counting and...
Rockwell Automation helps Loparex alleviate power supply drops with sag-correction system
For more than a decade, the company’s 305,000-square-foot production facility in Hammond, Wisconsin, had been experiencing voltage sags several...
Westermo helps Electricity North West upgrade to Ethernet/IP communications network
The modernised, `non-operations’ network provides reliability and bandwidth helping the company to better monitor and control the supply of...
Advanticsys helps Welsh high school enhance wireless building management efficiency
Advanticsys wireless solution supporting M-Bus and Modbus RTU / TCP was chosen by the School and Cardiff Council due to the non-intrusive nature of...
ISA announces IACS Security Lifecycle Training Program w/ Cyber Trainers
The Cyber Trainers are designed and equipped with full-function industrial automation system hardware and software configured to perform like the...
Aegis Software and ViTrox announce mutual machine programming interface
The machine programming interface between ViTrox Corporation’s automated X-Ray-inspection (AXI) machines and Aegis’ FactoryLogix software will...