Roboteq releases MDC2250 Programmable Motor Controller
April 11, 2011 – Roboteq releases MDC2250 Programmable Motor Controller,an intelligent controller capable of directly driving two DC motors up to 60Amps each, at up to 50V. The MDC2250 is targeted at designers of mobile robots, Automatic Guided Vehicles (AGVs), or any other high power motor control application.
The controller accepts commands, and can switch automatically from analog joystick, standard R/C radio, USB or RS232 interface. Using the USB or serial port, the MDC2250 can be used to design fully or semi-autonomous robots by connecting it to single board computers, wireless modems or WiFi adapters.
The MDC2250 incorporates a Basic Language Interpreter capable of executing over 50,000 Basic instructions per second. This feature can be used to write powerful scripts for adding custom functions, or for developing automated systems without the need for an external PLC or microcomputer.
The controller's two channels can be operated independently or combined to set the direction and rotation of a vehicle by coordinating the motors on each side (tank-like steering). The motors may be operated in open or closed loop speed or position modes with a 1 kHz update rate. The MDC2250 includes inputs for two Quadrature Encoders up to 250kHz, for precise speed and traveled distance measurement.
The MDC2250 features intelligent current sensing that will automatically limit the power output to 60A in all load conditions. The controller also includes protection against overheat, stall, and short circuits. The controller can be ordered in a single channel version with a drive output up to 120A
The controller includes up to 4 analog, 6 digital and 4 pulse inputs. Two 1A digital outputs are provided for activating, lights, valves, brakes or other accessories. The controller’s operation can be optimized using nearly 80 configurable parameters, such as programmable acceleration or deceleration, amps limits, operating voltage range, use of I/O, and more.
A free PC utility is available for configuring, tuning, monitoring and exercising the motor. The controller can be reprogrammed in the field with the latest features by downloading new operating firmware from Roboteq’s web site.
The MDC2250 is built into a compact 4.2”W x 5.25”L (106mm x 133mm), board-level open frame design. The board comes equipped with an aluminum heat-sink that ensures sufficient heat dissipation for operation without a fan in most applications.
The MDC2250 is available now to customers worldwide at $395 in single quantities, complete with cable and PC-based configuration software.
Laird releases Sentrius RG1xx Enterprise IoT gateway
Equipped with Laird’s enterprise grade 802.11 a/b/g/n MIMO Wi-Fi, wired Ethernet, Bluetooth and BLE connectivity within a single LoRa gateway,...
Festo introduces family of sanitary valves for pharma and biotech industries
The automated valve solutions feature the company’s VZBE ball valves, VZXA angle seat valves, VZQA pinch valves, DFPD quarter-turn actuators,...
MicroPower Direct releases MPO-60S series of AC/DC power supplies
The MPO-60S family is fabricated on a 4.09 x 2.05 x 1.00 inch open PC board. All models are specified for operation over the operating temperature...
Honeywell introduces Honeywell Trace document and change management software
Honeywell Trace is designed to minimize errors due to changes in configurations, improve worker productivity, and simplify automation asset...
EXAIR introduces Model 1004SS M4 NPT Back Blow Air Nozzle
This nozzle prevents blowing chips further into a part, tube or pipe and eliminates any safety hazard created by blowing debris out the far end of...
Solving Food Manufacturing Labor Shortages Through Robotic Automation
By Maria Ferrante, PMMI
PMMI had a chance to speak about new technologies and trends in automation with Don Wickstrum, president and owner of...
Microscan partners with Lakewood Automation to demonstrate MicroHAWK capabilities at Advanced...
MicroHAWK, in combination with the browser-based WebLink user interface, allows users to adjust reader settings remotely and to monitor results in...
Hanel's automated storage unit boosts logistics at North Carolina high school.
Hänel offered two Rotomats to the Material Handling Institute (MHI), and Western Guilford was one of several schools to apply for the donation....
Four Common Sources of Inaccuracy in Sensor Measurements
By CAS Dataloggers
This White Paper from CAS DataLoggers addresses four measurement accuracy issues in the order of most to least common.