Bel Power announces SLDM-06D1Ax and SLDM-12D1Ax modules of DC-DC converters | Automation.com

Bel Power announces SLDM-06D1Ax and SLDM-12D1Ax modules of DC-DC converters

October 182017
Bel Power announces  SLDM-06D1Ax and SLDM-12D1Ax modules of DC-DC converters

October 18, 2017 - Bel Power Solutions announced the SLDM Tunable Loop SLDM-06D1Ax and SLDM-12D1Ax modules, which are non-isolated DC-DC converters that deliver up to 6A and 12A with maximum flexibility of being mounted on the top side or bottom side of the host PCB.

The SLDM modules fit into small spaces (2.8mm high). They can be mounted in areas on the top side where ultra-low profile is required either due to airflow impeding issues or mechanical interference issues, or they can be mounted on the PCB bottom side to save top side real estate. Both modules can be used on bottom side reflow applications, underneath boards, mezzanine and in very dense power applications. The PMBus on board allows power system architects to control the power train using a 3-wire interface (data, clock and GND). Other features include a Power Good signal, fixed switching frequency, output overcurrent protection (non-latching), overtemperature protection, a remote on/off and ability to sink and source current.

Operating over an input voltage range (Vin = 3 Vdc - 14.4 Vdc), SLDM modules provide a precisely regulated output voltage from 0.45 Vdc to 5.5 Vdc. Programmable via an external resistor, they have a DOSA-standard footprint and are pin-to-pin with the GE SlimLynx Series. Typical applications include distributed power architectures, intermediate bus voltage applications, telecommunications equipment, server/storage/networking applications and industrial equipment.

The SLDM Tunable Loop product is in stock with Mouser and Digi-Key (beginning 2018). 
 

MORE PRODUCTS

VIEW ALL

RELATED