Calibration Instruments Product Showcase - Automation.com

Calibration Instruments

June 21, 2018

Additel introduces ADT875 Dry Well Calibrator

Each unit has performance specifications related to the guidelines published in Euramet cg-13 specifying stability, radial and axial uniformity, loading, and hysteresis.

MB Dynamics introduces Model CAL25HF electrodynamic air bearing vibration exciter
May 09, 2018

MB Dynamics introduces Model CAL25HF electrodynamic air bearing vibration exciter

Typical applications for the Model CAL25HF include high-volume accelerometer calibrations, sensor manufacturing quality assurance testing, and in-laboratory R&D instrumentation verifications.

Yokogawa introduces LS3300 AC power calibrator
July 25, 2017

Yokogawa introduces LS3300 AC power calibrator

The LS3300 can calibrate AC voltage, current, and power as well as test both phase difference and power factor. The LS3300 delivers an accuracy of 0.045% and a stability of 0.01% per hour.

Fluke introduces 6109A and 7109A portable calibration baths
April 12, 2017

Fluke introduces 6109A and 7109A portable calibration baths

The 6109A and 7109A feature tank volumes of 112 mm square tank opening by 154 mm deep, allowing technicians to immerse four sanitary sensors at a time — including batches of odd shaped sensors of varying lengths and diameters, which can be accommodated with room left for a reference thermometer.

POSITAL announces updated versions of TILTIX inclinometers
March 07, 2017

POSITAL announces updated versions of TILTIX inclinometers

The TILTIX inclinometers can be used on mobile equipment such as construction machinery, mining equipment, cranes and anywhere else where sudden movements, shocks and vibrations are likely to be encountered.

Zygo introduces ZPS absolute position measurement system
February 09, 2017

Zygo introduces ZPS absolute position measurement system

The ZPS system enables precision measurement and positional control for advanced applications, such as deformable optics, lens positioning systems, and fine stage control.

Fluke announces addition of four pyrometers to Endurance series
January 18, 2017

Fluke announces addition of four pyrometers to Endurance series

Application areas include primary and secondary metals manufacturing, carbon processing, silicon production, and now also foundries and welding, as well as rubber and thick plastics.

PI introduces SiP alignment systems for test and production
January 06, 2017

PI introduces SiP alignment systems for test and production

An R&D 100 winner in the Analytical/Test category, PI’s one-step global optimization product line addresses the requirement of incorporating multiple parallel optical paths with multiple, interacting inputs and outputs, all requiring optimization.

Renishaw introduces XM-60 multi-axis calibrator
December 19, 2016

Renishaw introduces XM-60 multi-axis calibrator

Designed for the machine tool market, the XM-60 multi-axis calibrator complements Renishaw’s calibration product line that includes the XL-80 laser system, XR20-W rotary axis calibrator and QC20-W wireless ballbar.

Calex Electronics introduces FibreMini pyrometer
December 01, 2016

Calex Electronics introduces FibreMini pyrometer

Containing no electronics, the FibreMini sensing head is immune to electromagnetic interference in high-EMC applications such as induction heating.

Posted in:
Fluke introduces 368 FC & 369 FC leakage current clamps
August 23, 2016

Fluke introduces 368 FC & 369 FC leakage current clamps

The Fluke 368 FC and 369 FC leakage current clamps are designed to help industrial electricians and maintenance technicians identify, document, record, and compare leakage current readings over time to help prevent problems before they happen.

Saelig announces TGP3100 series of pulse generators
August 22, 2016

Saelig announces TGP3100 series of pulse generators

The TGP3100 series can generate precision pulses from 1 mHz up to 50 MHz with pulse width and delay resolutions of 100 psec. Single and dual channel models are available, both featuring graphic LCDs for simultaneous text and waveform information.

Saelig introduces SDM3045X digital multimeter
August 12, 2016

Saelig introduces SDM3045X digital multimeter

The Siglent SDM3045X features a combination of basic measurement functions, with multiple math and display choices, and special features including histogram, trend chart, bar chart, statistics, hold measurement, dBm, etc.

JM Science introduces Density/Specific Gravity Meter
July 25, 2016

JM Science introduces Density/Specific Gravity Meter

Designed for any industry that requires measurement of concentration or density, the Density/Specific Gravity Meter takes measurement in 20 seconds and requires a minimum sample of 1.0mL

Fluke's 902 FC HVAC clamp meter wins Gold Award for Testing and Monitoring products
July 19, 2016

Fluke's 902 FC HVAC clamp meter wins Gold Award for Testing and Monitoring products

The CAT III 600V / CAT IV 300V rated Fluke 902 FC performs the essential measurements of HVAC systems — microamps for testing pilot light sensors, resistance up to 60 kilohms, AC current, AC/DC voltage, capacitance and contact temperature. The awards were chosen by an independent panel of HVAC contractors.

Fluke introduces 2271A pressure calibrator
July 13, 2016

Fluke introduces 2271A pressure calibrator

The 2271A is ideal for calibration laboratories that are adding pressure calibration services because it features a range of pressure measurement capabilities.

Spirax announces RIM 20 rotor insertion flowmeter
July 06, 2016

Spirax announces RIM 20 rotor insertion flowmeter

The RIM20, evolved from the RIM10, utilizes SMART multivariable electronics for measurement of mass or volumetric flow, density, temperature and pressure in one instrument.

LaserLinc announces TLAser1240 scanning micrometer
June 20, 2016

LaserLinc announces TLAser1240 scanning micrometer

The TLAser1240 micrometer measures diameter, height, or width up to 9.1 inches (231mm) and is designed for use in industries such as metal, glass, wire and cable, and plastics and rubber extrusion.

Posted in:
Product Category: 
Calibration Instruments
Related Portals:
Test, Measurement & LIMS Portal
JTAG Technologies releases JT 2127 family of hardware adapters
June 17, 2016

JTAG Technologies releases JT 2127 family of hardware adapters

The JT 2127-Flex system from JTAG Technologies is designed to help clients get diagnostics from a known-good test interface so they can ensure that the socket is soldered correctly (or not).

Honeywell launches IIoT-ready natural gas measurement and data management solutions
June 13, 2016

Honeywell launches IIoT-ready natural gas measurement and data management solutions

These end-to-end smart metering solutions help optimize the entire gas value chain, including applications from the wellhead to the burner tip.