Computers Product Showcase - Automation.com

Computers

October 11, 2018

Aitech Defense Systems releases industrial version of A177 Twister GPGPU RediBuilt supercomputer

Based on the NVIDIA Jetson TX2 System-on-Module (SoM), the A177 Twister uses CUDA and deep learning acceleration capabilities to handle the computational requirements needed in embedded systems that are managing multiple data and video streams.

Axiomtek releases UST500-517-FL transportation embedded PC
October 08, 2018

Axiomtek releases UST500-517-FL transportation embedded PC

The UST500-517-FL is able to operate under a temperature range from -40°C to +70°C and vibration endurance up to 3 Grms. This transportation embedded box is in compliance with E-Mark and EN 50155 for mobile surveillance applications.

congatec announces conga-SMX8 Computer-on-Module
July 31, 2018

congatec announces conga-SMX8 Computer-on-Module

The SMARC 2.0 modules with NXP i.MX8 processors, hardware based virtualization and resource partitioning are designed for a range of stationary and mobile industrial applications including real-time robotics and motion controls.

Axiomtek introduces P1177E-500 industrial-grade touch panel PC
July 26, 2018

Axiomtek introduces P1177E-500 industrial-grade touch panel PC

The P1177E-500 offers multiple CPU options with the LGA1151 socket 7th/6th generation Intel Core i7/i5/i3, Celeron or Pentium processors and the Intel H110 chipset.

Posted in:
Beckhoff introduces C6015 Industrial PC (IPC)
July 10, 2018

Beckhoff introduces C6015 Industrial PC (IPC)

Measuring 82 x 82 x 40 mm, the C6015 IPC with multi-core technology can be installed in confined spaces and is equipped with an Intel Atom processor that offers up to four CPU cores.

Lanner announces HTCA-6400 carrier grade hardware platform
June 27, 2018

Lanner announces HTCA-6400 carrier grade hardware platform

Leveraged from the HTCA-6200, HTCA-6400 is designed with four CPU blades and four network I/O blades. Each of the CPU blades is empowered by two Intel Xeon E5-2600 v3/v4 CPUs and sixteen DDR4 R-DIMM sockets.

Bachmann Electronic announces enhanced OT1300  panel PC
June 26, 2018

Bachmann Electronic announces enhanced OT1300 panel PC

The OT1300 has the visualisation software integrated into the hardware, and is endurance tested as a complete system for 24/7 operation – including web visualisation via OPC UA. In conjunction with the atvise software, commissioning the OT1300 is a plug-and-play operation, even from a remote monitoring centre.

IBASE Technology introduces ARD-037-N bar-type panel PC
March 22, 2018

IBASE Technology introduces ARD-037-N bar-type panel PC

The standard ARD-037-N supports 2GB DDR3L-1866 memory, expandable to 8GB, a 64GB mSATA drive and Intel (Gen7-LP) 4EU SoC-integrated graphics to deliver a passenger information system.

Posted in:
Product Category: 
Computers
Related Portals:
Industrial Computers, Factory Automation
Stratus introduces Stratus ztC Edge computing platform
February 20, 2018

Stratus introduces Stratus ztC Edge computing platform

ztC Edge is a zero-touch, virtualized and self- protecting computing platform, specifically designed for industrial edge environments.

Logic Supply introduces ML350 customizable computing platform
January 25, 2018

Logic Supply introduces ML350 customizable computing platform

Powered by Intel Apollo Lake processing, the ML350 is a customizable computing platform, purpose-built from board to chassis for applications ranging from digital signage and machine automation, to industrial IoT and edge computing.

Lanner releases LEC-2137 IoT-ready industrial box PC
January 25, 2018

Lanner releases LEC-2137 IoT-ready industrial box PC

The LEC-2137, measured at 198mm x 57mm x 143.8mm (W x H x D), is a thin client gateway that can be configured with either a total of 6 Ethernet ports or 2 Ethernet ports and 4 PoE ports.

Axiomtek announces the MPC102-845 medical-grade panel PC
December 22, 2017

Axiomtek announces the MPC102-845 medical-grade panel PC

Certified for medical applications, the MPC102-845 is designed to be integrated with nursing carts and medical devices as a point-of-care terminal or infotainment terminal.

Posted in:
Product Category: 
Computers
Related Portals:
Factory Automation, Industrial Computers
Axiomtek releases tBOX500-510-FL embedded PC
December 11, 2017

Axiomtek releases tBOX500-510-FL embedded PC

The transportation embedded system is suited for transportation-related applications such as security surveillance, onboard devices controller, truck fleet management, data transfer, and onboard passenger infotainment system.

Yokogawa introduces Y-Flow family of computer and remote terminal unit (RTU)
October 18, 2017

Yokogawa introduces Y-Flow family of computer and remote terminal unit (RTU)

The Y-Flow YFFC is a computer designed to measure AGA 3 orifice gas flow and the Y-Flow YRTU is a remote terminal unit designed to measure various complex AGA gas flow calculations as well as remote control applications.

NEXCOM introduces NIFE 103 PC-based controller
September 12, 2017

NEXCOM introduces NIFE 103 PC-based controller

Latest PC-based controller from NEXCOM takes over entire processes such as sorting, labeling, packing, dispensing, and monitoring by providing more flexibility, integration, and connectivity in a compact fanless design.

Logic Supply releases MC850 Series of GPU-capable computer
September 08, 2017

Logic Supply releases MC850 Series of GPU-capable computer

Offering compatibility with the latest generation 10-Series NVIDIA graphics cards, and an integrated power supply, the MC850 Series is ideal for image processing applications like machine vision, virtual reality, Fog Computing, Edge Devices, Industrial IoT and interactive digital signage.

IBASE announces AMS300 modular box PC
September 01, 2017

IBASE announces AMS300 modular box PC

The AMS300 is a expandable fanless system designed for industrial control and measurement processes in smart factory automation applications. It is powered by 7th/6th Gen Intel Core i7/i5/i3 processors and comes integrated with 8GB memory as well as 64GB of industrial-grade SSD storage.

Posted in:
Product Category: 
Computers
Related Portals:
Factory Automation, Industrial Computers
Neousys introduces Nuvo-6108GC GPU computer
August 09, 2017

Neousys introduces Nuvo-6108GC GPU computer

Powered by Intel Xeon E3 v5 or 6th Gen Core processor with C236 chipset, Nuvo-6108GC supports up to 32GB ECC/ non-ECC DDR4 memory and has rich I/O ports such as Gigabit Ethernet, USB3.0, video ports and serial ports.

Posted in:
Product Category: 
Computers
Related Portals:
Industrial Computers, Factory Automation
IBASE introduces AMI220 modular computing solution
August 01, 2017

IBASE introduces AMI220 modular computing solution

The AMI220 is a fanless and cable-free system built with a passive finned heat sink and an industrial-grade motherboard that has an I/O interface and a power supply with over-voltage, low voltage and anti-plug protection.

Beckhoff announces Microsoft Azure certification for the C6015 Industrial PC (IPC) and CX5140 Embedded PC
July 05, 2017

Beckhoff announces Microsoft Azure certification for the C6015 Industrial PC (IPC) and CX5140 Embedded PC

All certified devices from Beckhoff can be found in the Microsoft “Azure Certified for IoT” device catalog, providing customers with a guide for Azure-compatible devices. Both the C6015 IPC and CX5140 Embedded PC are designed to help implement cloud connectivity in a wide range of industries.