Process Controllers Product Showcase - Automation.com

Process Controllers

August 01, 2018

Future Design Controls introduces MCT4 ¼ DIN multi-loop controller

The MCT4 will provide control for applications in various markets including semiconductor, automotive, heat treating, packaging, food & beverage, chemical, HVAC, laboratory, etc. where control, monitoring and/or data logging is required.

Optimal Engineering Systems announces seven solenoid control modules
June 06, 2018

Optimal Engineering Systems announces seven solenoid control modules

Applications of these modules measuring 3.000 in. x 3.000 in. include: solenoids, valves, actuators, DC motors, electromagnets, hydraulics, LEDs, power amplifiers for electro-pneumatic proportional valves, and pressure and flow control valves.

Red Lion announces enhancements to PXU series of PID controllers
April 17, 2018

Red Lion announces enhancements to PXU series of PID controllers

Red Lion Controls announced additional features for its PXU series of proportional-integral-derivative (PID) controllers, including Ramp/Soak, CT Input, 2nd Analog Input and 2nd Analog Output.

DCiii introduces Mirador chemical injection control and diagnostic module
December 06, 2017

DCiii introduces Mirador chemical injection control and diagnostic module

Operating on an open-based platform with Modbus RTU communication protocol, the Mirador integrates with sensors, communications, and software to provide full operational visibility, tracking, control, and analysis over chemical injection processes from a remote control station.

Nordson MARCH announces RollVIA plasma system
November 29, 2017

Nordson MARCH announces RollVIA plasma system

The RollVIA system is used for plasma applications such as surface activation for improved adhesion, carbon removal and descum/desmear for cleaner surfaces, and etchback, which removes a slight amount of dielectric contamination between internal copper planes during production of PCBs.

ASCO announces 128-solenoid valve expansion for Numatics G3 Series and Numatics 580 Series electronic platforms
August 14, 2017

ASCO announces 128-solenoid valve expansion for Numatics G3 Series and Numatics 580 Series electronic platforms

The expanded G3 and 580 Series platforms feature process control architecture that permits the design engineer or end-use specifier to optimize the size of the control cabinet for the number of required valves.

August 14, 2017

Microscan announces LVS-9585 Verifier for printed labels and direct part marks

The LVS-9585 Handheld Portable Barcode Verifier provides verification of both printed labels and direct part marks (DPM). 1D and 2D direct part marks are created using methods such as laser etching, chemical etching, and dot peen marking on a variety of surfaces including metals, plastics, ceramics, and composite materials.

Yokogawa release CENTUM VP R6.04 integrated production control system
March 28, 2017

Yokogawa release CENTUM VP R6.04 integrated production control system

CENTUM VP is a production control platform for a variety of process operations. CENTUM VP solutions encompass all stages of the plant lifecycle, from design, engineering, installation, and startup to full operation.

Alicat Scientific introduces EPC & EPCD family of pressure controllers
December 08, 2016

Alicat Scientific introduces EPC & EPCD family of pressure controllers

EPC instruments are ideal for use in OEM gas chromatographs, fluidics dispensing for flow cytometry, and anywhere responsive pressure control is needed.

Endress+Hauser introduces Tank Gauging Platform monitoring system
September 07, 2016

Endress+Hauser introduces Tank Gauging Platform monitoring system

The Tank Gauging Platform is a monitoring and inventory control system designed for tank farms and terminals in the chemical, oil & gas, refining and similar industries where large amounts of liquid or solid materials are acquired, stored and transferred.

Alicat introduces MCRH 5000 mass flow controller
August 24, 2016

Alicat introduces MCRH 5000 mass flow controller

The controller manages industrial processes with more chaotic upstream fluctuations, such as control of industrial combustion gases, or mass flow into food and packaging processes.

Easy DAQ and onboard data logging with the Zen Datalogger
August 09, 2016

Easy DAQ and onboard data logging with the Zen Datalogger

Get all your data acquisition (DAQ) requirements fulfilled with the Zen Datalogger. It logs data onto a 1GB micro SD card, so you can physically take your data with you or route it to other hardware.

Brooks Instrument releases GF100 series of mass flow controllers
July 11, 2016

Brooks Instrument releases GF100 series of mass flow controllers

Designed for semiconductor processes that demand fast response and repeatable delivery of process gases with high- and ultra-high levels of purity, the GF100 Series is made to ensure precise and stable process gas flow control over time.

Yokogawa releases CENTUM VP R6.03 integrated production control system
May 19, 2016

Yokogawa releases CENTUM VP R6.03 integrated production control system

CENTUM VP provides an operation, monitoring, and engineering environment for every phase of the plant lifecycle, from initial design, engineering, installation of systems and equipment, and startup to full operation and the ongoing performance of renovations and modifications until it is time to withdraw a facility from service.

Posted in:
Product Category: 
Process Controllers
Related Portals:
DCS & Batch Controllers, Process Automation
Micronor introduces MR380-0 OEM controller
May 13, 2016

Micronor introduces MR380-0 OEM controller

The MR380-0 OEM Controller from Micronor provides a solution for OEM manufacturers and control system providers. Applications include oil, gas, and mines; petrochemical plants; high voltage transformer and switch gear; and process industries and instrumentation.

Posted in:
Product Category: 
Process Controllers
Related Portals:
DCS & Batch Controllers, Process Automation
Siemens introduces 3 communications processors for Simatic ET 200SP controller
April 13, 2016

Siemens introduces 3 communications processors for Simatic ET 200SP controller

The three communications processors, CP 1542SP-1, CP 1543SP-1 and CP 1542SP-1 IRC, give the SimaticET 200SP controller an additional Industrial Ethernet interface.

Emerson adds PROFINET to DeltaV distributed control system
April 04, 2016

Emerson adds PROFINET to DeltaV distributed control system

The DeltaV system now connects directly to motor center and variable speed drive applications

NovaTech updates D/3 distributed control system software
April 04, 2016

NovaTech updates D/3 distributed control system software

Enhancements in version 15 include reduced configuration time, integration with the OSI PI historian, and additional graphics objects.

Posted in:
Product Category: 
Process Controllers
Related Portals:
Process Automation, DCS & Batch Controllers
November 23, 2015

Rockwell Automation updates PlantPAx DCS

Enhancements include a mobile component that enables users to create displays and interact with process data across any HL5-compliant mobile platform.

Posted in:
Product Category: 
Process Controllers
Related Portals:
Process Automation, DCS & Batch Controllers
Rockwell adds MPC to PlantPAx DCS
November 21, 2015

Rockwell adds MPC to PlantPAx DCS

Rockwell embeds fully functional MPC technology into Logix controllers to help maximize equipment performance.

Posted in:
Product Category: 
Process Controllers
Related Portals:
Process Automation, DCS & Batch Controllers