DIN Connectors Product Showcase - Automation.com

DIN Connectors

September 10, 2019

Molex announces Micro-Latch 2.00mm Wire-to-Board Connector System

The Micro-Latch 2.00mm Wire-to-Board Connector System offers two to 15 single-row plug-in circuits, with both vertical and horizontal configurations; through-hole terminals; a 2.00mm-pitch low-profile connector

Phoenix Content announces expansion of IP-protected PRC series of circular connectors
June 25, 2019

Phoenix Content announces expansion of IP-protected PRC series of circular connectors

Inverted cable connectors and couplings ensure cable-to-cable connections in building, industrial, and outdoor applications. Modular basic housings and contact inserts also make angled conductor outlets possible for the first time.

Binder USA announces snap-in IP67 twin distributor for 720 Series of miniature circular connectors
June 06, 2019

Binder USA announces snap-in IP67 twin distributor for 720 Series of miniature circular connectors

Th twin distributor features 3 and 5 gold-plated contacts rated up to 7A at 250V (5A at 125 V). The twin distributor is also a splitter, the solution for splitting off a connection with two protected paths.

Posted in:
Product Category: 
DIN Connectors
Related Portals:
Electrical & Control Panels, Factory Automation
L-com announces M12FT8A series field termination connectors
May 10, 2019

L-com announces M12FT8A series field termination connectors

These M12 interconnects were designed for factory automation, industrial control, test equipment, I/O connectivity, sensors and actuators, or any connectivity application where a screw down interface is necessary.

Binder USA releases the Series 696 HEC (Harsh Environment Connector)
April 19, 2019

Binder USA releases the Series 696 HEC (Harsh Environment Connector)

The binder Series 696 HEC was developed specifically for use in challenging environments. A3-point bayonet locking mechanism and binder’s lightweight plastic design ensures that the connectors are highly resistant against climatic conditions, chemical substances, and other industrial hazards.

Molex introduces SlimStack 0.40mm Floating Board-to-Board Connectors
March 22, 2019

Molex introduces SlimStack 0.40mm Floating Board-to-Board Connectors

These connectors are designed for automotive, industrial, and consumer applications that require a floating range and high-speed transmission.

binder releases M12 male panel-mounted connector
March 12, 2019

binder releases M12 male panel-mounted connector

binder’s M12 connector has a separate contact body, allowing it to be positioned exactly where users want the mating right-angle cable connector.

Posted in:
Product Category: 
DIN Connectors
Related Portals:
Electrical & Control Panels, Factory Automation
Binder USA releases Series 770 NCC female panel-mount connector
March 01, 2019

Binder USA releases Series 770 NCC female panel-mount connector

When the panel-mount connector is mounted it can withstand wash-downs and splashes when a cable is not connected, making the NCC connector suitable for medical and industrial applications where spillages and cleanings are a regular part of the environment.

Posted in:
Product Category: 
DIN Connectors
Related Portals:
Electrical & Control Panels, Factory Automation
Molex releases Micro-Lock Plus Wire-to-Board Connector System
December 17, 2018

Molex releases Micro-Lock Plus Wire-to-Board Connector System

The Micro-Lock Plus Wire-to-Board Connector System meets automotive, industrial and consumer applications requirements and is rated at a 105˚C operating temperature.

Posted in:
HARTING introduces Han ES Press HMC series connector
November 28, 2018

HARTING introduces Han ES Press HMC series connector

The quick connect technology is dubbed the Han ES Press HMC, with the suffix ‘HMC’ standing for High Mating Cycles. The contact inserts are equipped with a pre-tensioned cage clamp which is triggered by an actuator.

Molex announces set of 1.00mm pitch wire-to-board Pico-Clasp Connectors
November 26, 2018

Molex announces set of 1.00mm pitch wire-to-board Pico-Clasp Connectors

The connectors range in circuit size options, from 2 to 50, in single- and dual-row configurations. Gold plating provides security that the connectors will remain intact in harsh weather conditions.

HARTING introduces M12 connector in IEC 61076-2-111 standard K-coding
November 13, 2018

HARTING introduces M12 connector in IEC 61076-2-111 standard K-coding

In order to offer the M12 form factor to device manufacturers for voltage supply, HARTING will be supplying the K-coding with 7kW at 630V and 16A from Spring 2019, allowing the integrated transmission of data, signals and power.

Mencom introduces ILME “SQUICH” spring terminal rectangular connectors with 3 and 4 Pole inserts
September 26, 2018

Mencom introduces ILME “SQUICH” spring terminal rectangular connectors with 3 and 4 Pole inserts

The CK series SQUICH connectors are wired on the rear top of the insert. This keeps the wires from being bent and eliminates the disassembly process of the inserts from the enclosures when re-wiring is required.

Binder USA releases Series 696 HEC (Harsh Environment Connector)
August 29, 2018

Binder USA releases Series 696 HEC (Harsh Environment Connector)

The 32 A per contact, 600 V power connector is constructed with 4+PE, 8 and 12 silver-plated crimp contacts.

Posted in:
WAGO announces D Sub Mini connector breakout modules for field termination
May 14, 2018

WAGO announces D Sub Mini connector breakout modules for field termination

Each module is designed to interface directly with a fixed mounted D Sub or with a cable when using DIN rail or a panel mount

Posted in:
Product Category: 
DIN Connectors
Related Portals:
Electrical & Control Panels, Factory Automation
Molex introduces D-Sub form factor Earthing Connectors
May 03, 2018

Molex introduces D-Sub form factor Earthing Connectors

The IP66 and IP67 NEMA-rated Earthing Connector protects sensitive equipment such as telecommunications base stations against water ingress in the field in mated condition

Binder introduces 5-pin version of Series 696 Harsh Environment Connector
January 31, 2018

Binder introduces 5-pin version of Series 696 Harsh Environment Connector

The Series 696 HEC’s plastic design was developed specifically for use in demanding environmental conditions. It is resistant against climatic influences such as UV exposure, as well as shock and vibration.

Posted in:
Product Category: 
DIN Connectors
Related Portals:
Electrical & Control Panels, Factory Automation
Astute Electronics announces modular C146 HeavyMate connectors
January 23, 2018

Astute Electronics announces modular C146 HeavyMate connectors

The HeavyMate range consists of hoods, housings, inserts and various contact types designed for external applications where EMC protection is important; where a high number of contacts may be required or a range of signals are being transmitted; and where there is a need for a lockable system.

Posted in:
Binder announces binder Series 696 HEC connectors
January 22, 2018

Binder announces binder Series 696 HEC connectors

The binder Series 696 HEC connectors are manufactured from a tough UL 94V-0 rated polyamide and incorporate a three-point bayonet locking system that makes for secure fastening.

Posted in:
Product Category: 
DIN Connectors
Related Portals:
Electrical & Control Panels, Factory Automation
Molex announces Micro-Lock Plus Wire-to-Board Connector System
January 03, 2018

Molex announces Micro-Lock Plus Wire-to-Board Connector System

Designed for industries such as automotive, consumer, and industrial automation, the Micro-Lock Plus Connector System is suitable for a variety of applications, including vehicle switches, robotics, drones, home appliances, and power tools.

Posted in: