Pushbuttons, Switches Product Showcase - Automation.com

Pushbuttons, Switches

October 30, 2018

C&K announces PNP3 series of sealed pushbutton switches

Constructed in a black PBT/PC thermoplastic housing, the switches include an internal silicone rubber seal and are rated to IP68, for harsh environments and for power wash-down applications, or anywhere the switch may be exposed to dust, water or other damaging elements.

Larson Electronics introduces EPL-SLSW-XS explosion proof selector switch
October 01, 2018

Larson Electronics introduces EPL-SLSW-XS explosion proof selector switch

The EPL-SLSW-XS is a two-position explosion proof selector switch designed to prevent the ignition of external, flammable atmospheres in hazardous locations. This 10-amp unit has a maximum voltage rating of 600V.

Littelfuse introduces LJ series of TRIAC
September 05, 2018

Littelfuse introduces LJ series of TRIAC

his combination of packaging, temperature capabilities and choice of current ratings makes them suited for Internet of Things (IoT) applications that require compact design but don’t involve continuous high currents such as smart doorbells, thermostats, ceiling fans/lights, door locks, etc.

Larson Electronics announces EPS-PB10-DPDT explosion proof single push button switch
July 19, 2018

Larson Electronics announces EPS-PB10-DPDT explosion proof single push button switch

The EPS-PB10-DPDT from Larson Electronics is an explosion proof single push button switch rated at 10-amps and operates on 600V AC with a choice of ½” inch or ¾” hub sizes for connection.

AutomationDirect releases NITRA 22mm pushbutton and switch pilot devices
June 21, 2018

AutomationDirect releases NITRA 22mm pushbutton and switch pilot devices

ECP series 22mm pneumatic pushbuttons and switches are used with EVP series valve bodies to create manual valve assemblies, or hybrid electro-pneumatic actuators.

Siemens releases Ruggedcom RST2228 Layer 2 rack switch
January 22, 2018

Siemens releases Ruggedcom RST2228 Layer 2 rack switch

The Ruggedcom RST2228 is a Layer 2 rack switch with 4 integrated 1/10 Gbit/s uplinks and up to 24 field modular 10/100/1000 Mbit/s interfaces supporting IEEE 1588 Transparent Clock.

Posted in:
STEUTE announces Series ZS 71 emergency pull wire switch
January 22, 2018

STEUTE announces Series ZS 71 emergency pull wire switch

STEUTE's Series ZS 71 emergency pull wire switch is equipped with snap-action, NC positive-break contacts, providing a means for initiating an emergency stop along the length of the installed pull-wire.

LogiSwitch releases initial series of pushbutton switches
November 06, 2017

LogiSwitch releases initial series of pushbutton switches

The initial LogiSwitch product launch includes a series of panel-mount pushbutton switches and a beginning line of subminiature limit switches with the new technology.

Aplus Finetek announces SAL18 series of RF admittance level switch
June 14, 2017

Aplus Finetek announces SAL18 series of RF admittance level switch

The SAL18 series RF admittance level switch features a local LED indication, 20-250VAC/VDC universal power supply, pushbutton calibration, independent adjustable time delay for each material absence and material presence detection and can work with target materials with a dielectric constant down to as low as 1.5.

Posted in:
AutomationDirect announces availability of Schmersal pushbuttons
October 27, 2016

AutomationDirect announces availability of Schmersal pushbuttons

These control and signaling devices have special design features that make the devices suitable for food processing, pharmaceutical, and medical applications.

C&K releases RM series of rotary switches
July 11, 2016

C&K releases RM series of rotary switches

The RM Series rotary switches are designed for use in next-generation building automation systems, including lighting and fan controls, and test and measurement equipment.

Posted in:
ASI introduces Push Button, E-Stop and Selector Switch kits
June 16, 2016

ASI introduces Push Button, E-Stop and Selector Switch kits

The switches are designed to provide the protection directed by UL Type 4x, IP66, IP67 and 69K standards. They can withstand water jets, water immersion up to one meter, extreme temperatures ranging from -20°C to 70°C as well as resist damaging effects of oils, solvents and hydrocarbons.

Posted in:
Smart Vision Lights releases CTL Grey series LED lights
May 31, 2016

Smart Vision Lights releases CTL Grey series LED lights

The CTL Grey Series cable provides a directly wired connection between a single light and the Baumer VeriSens XC series camera. The CTL series is available for either steady/constant or flash/strobe connections, and the cables are available in lengths of 0.3 meters and 2 meter.

Posted in:
Product Category: 
Pushbuttons, Switches
Related Portals:
Factory Automation, Vision
APEM releases three elastomer handles for TS Series Thumbstick
April 13, 2016

APEM releases three elastomer handles for TS Series Thumbstick

Similar in size and operation to “gamepad” controls, the TS series Thumbstick is suited for military robotics, material handling and UGV operator control units.

Banner updates touch buttons
March 15, 2016

Banner updates touch buttons

Smart electric field sensing provides immunity to false triggering caused by the buildup of detergents, oils and other foreign materials

Posted in:
Product Category: 
Pushbuttons, Switches
Product Manufacturer: 
Banner Engineering
Related Portals:
Electrical & Control Panels, Factory Automation
Molex introduces capacitive and metal touch switches
August 12, 2015

Molex introduces capacitive and metal touch switches

Capacitive and metal touch switches offer excellent immunity to environmental conditions, including resistance to electromagnetic interference (EMI).

Posted in:
Product Category: 
Pushbuttons, Switches
Product Manufacturer: 
Molex
Related Portals:
Factory Automation, Electrical & Control Panels
Banner Engineering introduces TL70 wireless tower light
July 21, 2015

Banner Engineering introduces TL70 wireless tower light

For use in harsh environments, the TL70 wireless tower light features rugged, water-resistant IP65 housing with UV stabilized material.

Posted in:
Product Category: 
Pushbuttons, Switches
Product Manufacturer: 
Banner Engineering
Related Portals:
Factory Automation, Electrical & Control Panels, Machine Safety
AutomationDirect releases IDEM emergency stop control stations
June 19, 2015

AutomationDirect releases IDEM emergency stop control stations

Available in plastic and stainless steel housings, the emergency stop control stations conform to ISO 13850, ISO 13849-01, IEC 60947-5-1 and IEC 60947-5-5. Prices start at $29.

RAFI releases emergency-stop pushbutton
June 09, 2015

RAFI releases emergency-stop pushbutton

The compact emergency-stop pushbutton has an installation height of only 25.9 mm from the front plate.

Posted in:
APEM announces 26mm FP26 pushbuttons
May 18, 2015

APEM announces 26mm FP26 pushbuttons

FP26 is available with a momentary or latching solder lug terminal, with silver or silver / gold plated contacts and rated up to 1 million mechanical lifecycles.

Posted in: