FCI introduces model ST102A Flow Meter and the MT100 Series Flow Meters

August 112017
FCI introduces model ST102A Flow Meter and the MT100 Series Flow Meters

August 11, 2017--Process and plant engineers responsible for optimizing combustion or pre-heated air to large boilers, stack environmental emissions monitoring and reporting (U.S. EPA CEMS), or flue gas/scrubber balancing, will find a possible solution in FCI’s family of multipoint thermal flow meters. 
Designed specifically for flow measurement in round pipes or stacks of 12 inches [300 mm] and larger diameter, and square or rectangular ducts with cross sectional area of 100 inches [250mm]  and larger, the model ST102A Flow Meter and the MT100 Series Flow Meters from Fluid Components International (FCI) provide two  to eight  non-clogging, no moving parts sensing points.

FCI’s multipoint air/gas thermal flow meters combine electronics technology with application-matched flow sensors and calibration in a package designed for demanding plant operating environments.  They are also always dual-function, providing both flow rate and temperature of the process.

The multiple FCI thermal dispersion sensors are inserted at various depths within a pipe or duct and their outputs are multiplexed and averaged to produce the flow rate within the process line. Where dual point sensing is sufficient, the ST102A Flow Meter is a solution.  In more complex applications such as larger exhaust stacks, the MT100 Series Flow Meter provides up to eight sensors.

Both flow meters are installed in a simple insertion tap.  In large stacks with platforms, they install in single plane resulting in significant savings in installation costs and maintenance access. These flow meters are direct mass flow measuring, they operate over a wide 100:1 turndown and are compatible in processes operating at up to 850 °F (454 °C). 

The transmitter available with the ST102A and MT100 features a choice of output options to interface with virtually any DCS, PLC, SCADA, or recorder.  Dual, isolated, high resolution 4-20mA outputs compliant with Namur NE43, HART (Fieldcomm Group certified), Foundation Fieldbus (Fieldcomm Group certified), Profibus-PA, Modbus, 0-1kHz frequency/pulse and a USB port are all available.

Both meters feature an LCD readout that provides comprehensive process information with both analog and digital displays of flow rate, temperature and totalized flow, bar graph and/or digital strip-chart of flow rate, alarm conditions and instrument health and calibration diagnostics.  They also include a user programmable data logger that records flow rate, temperature and totalized flow as well as diagnostics results on a removable, 8GB microSD card.  
These meters have been independently tested and verified to meet and comply with IEC safety directives for EMC and LVD, and carry the CE marking. Optionally available for process installations with hazardous, potentially explosive gases and/or dust, they can be ordered with FM/FMc, ATEX or IECEx and other HazEx agency approvals for Division II/Zone 2 or Division I/Zone 1.

About FCI

Fluid Components International is a global company committed to meeting the needs of its customers through innovative solutions to the most challenging requirements for sensing, measuring and controlling flow and level.

MORE PRODUCTS

VIEW ALL

RELATED