Flow Meters Product Showcase - Automation.com

Flow Meters

September 20, 2018

Emerson introduces Rosemount 9295 Process Flow Meter

The Rosemount 9295 helps end users streamline procurement, installation, operation and maintenance. Design and purchasing consists of specifying and buying one assembly.

Endress+Hauser releases Proline Promass A Coriolis mass flow meter
September 05, 2018

Endress+Hauser releases Proline Promass A Coriolis mass flow meter

The Promass A sensor system is mounted on a base plate that acts as a “shock absorber,” effectively shielding the Coriolis measurement from outside interference, e.g. from pipe vibrations.

FCI announces ST75 Series Air/Gas Flow Meter for gas dosing, injection measurement
August 24, 2018

FCI announces ST75 Series Air/Gas Flow Meter for gas dosing, injection measurement

It can be calibrated to measure gases over a flow range from 0.04 to 559 SCFM (0.07 to 950 NCMH), depending on line size, which is useful in low-flow applications requiring small doses.

AW-LAKE and KEM Küppers announce TCM Classic, TCM Pro flow meters and TCD 9000 Series transmitters
July 25, 2018

AW-LAKE and KEM Küppers announce TCM Classic, TCM Pro flow meters and TCD 9000 Series transmitters

The TCM “CLASSIC” Series meets general industrial requirements out of the box while the TCMP "PRO” Series offers units with performance specifications and diagnostic capabilities for operation in challenging environments.

Endress+Hauser introduces Proline Prosonic Flow E 100 ultrasonic flow meter
March 27, 2018

Endress+Hauser introduces Proline Prosonic Flow E 100 ultrasonic flow meter

The Prosonic Flow E 100 is designed for use in industrial, process, power utility, fresh water, steam circuits and boiler feedwater systems.

FCI announces enhanced version of  MT100 Series of flow meters
March 23, 2018

FCI announces enhanced version of MT100 Series of flow meters

FCI’s MT100 Series Flow Meters, with the optional CEMS and CERMS applications package, provide a 24-hour interval automated calibration drift test of low and high span points, and interference sensor check.

Posted in:
Fox Thermal Instruments introduces Fox Model FT4X Thermal Mass Flow Meter
February 01, 2018

Fox Thermal Instruments introduces Fox Model FT4X Thermal Mass Flow Meter

The FT4X was designed to be used in Oil & Gas and Industrial applications. It is suitable for applications monitoring pure gases, mixed gases, and even complex flare gas compositions.

Alicat announces EtherCAT option for Alicat mass flow and pressure instruments
December 05, 2017

Alicat announces EtherCAT option for Alicat mass flow and pressure instruments

EtherCAT joins Alicat’s offering of industrial automation protocol options, which also includes Modbus TCP/IP, Modbus-RTU, EtherNet/IP, DeviceNet and PROFIBUS communication options to fit new or existing systems.

Siemens releases Sitrans FS220 clamp-on ultrasonic flowmeter
November 03, 2017

Siemens releases Sitrans FS220 clamp-on ultrasonic flowmeter

The flow system is designed for multiple industries requiring budget-conscious liquid flow instrumentation, including water and wastewater, power, HVAC and chemical.

FCI announces enhanced ST51 series of thermal mass flow meters
November 01, 2017

FCI announces enhanced ST51 series of thermal mass flow meters

Process engineers responsible for on-site plant biomass combined heat and power (CHP) systems may find the ST51 Series Thermal Mass Flow Meter from Fluid Components International (FCI) provides accurate measurement of syngas fuel flow to the CHP engine.

Emerson announces smaller version of MPFM 2600 modular flow meter
October 30, 2017

Emerson announces smaller version of MPFM 2600 modular flow meter

The MPFM 2600 is part of the scalable Roxar Multiphase Meter product family built on measurement principles used in over 1,500 meter installations worldwide, and enables shale operators to monitor the flow from the well stream continuously and in real-time.

AW-LAKE introduces TW series of turbine flow meters
October 23, 2017

AW-LAKE introduces TW series of turbine flow meters

Working together, the Flow Meter and Totalizer can measure, locally display and wirelessly transmit intelligent flow data to a Gateway for remote monitoring and control on a PC, PLC or other control system.

FCI's  FLT93L Flow Switch aims to enhance safety for natural gas facilities
September 08, 2017

FCI's FLT93L Flow Switch aims to enhance safety for natural gas facilities

FCI’s inline FLT93L Flow Switch is a thermal dispersion flow/level/temperature switch that was designed based on FCI’s more than 50 years of flow/level/temperature switch applications experience

Posted in:
Assured Automation announces WM-NLCH Series of hot water meters
August 25, 2017

Assured Automation announces WM-NLCH Series of hot water meters

Typical uses of the WM-NLCH flow meter include residential and commercial metering and sub-metering applications that use hot water: industrial food, beverage & plant process water usage, industrial laundry, industrial baking, cement mixing, apartment/condo complexes.

FCI introduces model ST102A Flow Meter and the MT100 Series Flow Meters
August 11, 2017

FCI introduces model ST102A Flow Meter and the MT100 Series Flow Meters

Designed specifically for flow measurement in round pipes or stacks of 12 inches [300 mm] and larger diameter, and square or rectangular ducts with cross sectional area of 100 inches [250mm] and larger, the model ST102A Flow Meter and the new MT100 Series Flow Meters from Fluid Components International (FCI) provide two to eight non-clogging, no moving parts sensing points.

Fuji Electric announces Spool Type Ultrasonic Flow Meter (FST)
July 26, 2017

Fuji Electric announces Spool Type Ultrasonic Flow Meter (FST)

The FST, which is now available for shipment to customers, has a simplified front panel for configuration of parameters, and allows customers to enter piping conditions or calculate sensor spacing without opening the cover.

Mass Flow ONLINE introduces LIQUI-VIEW Base series of flow meters
July 14, 2017

Mass Flow ONLINE introduces LIQUI-VIEW Base series of flow meters

LIQUI-VIEW Base instruments offer a solution for monitoring the flow or consumption of cleaning water, cooling water or spa water.

Posted in:
Badger Meter introduces Blancett B3100 series of flow meters
July 07, 2017

Badger Meter introduces Blancett B3100 series of flow meters

The functionality of the B3100 flow monitor is designed for use with automated systems in remote locations, such as monitoring of meters in oil fields.

Bronkhurst releases ES-FLOW Flow Meter
June 27, 2017

Bronkhurst releases ES-FLOW Flow Meter

Typical applications for the low-flow liquid flow meters and controllers can be found in Food, Beverage & Pharma (e.g. additives, sterilization), Medical and Chemical (e.g. catalysts, reagents) and many other markets which require precision fluid handling e.g. fuel consumption measurement and dosing of colorants or lubricants in many industries.