Analog to Digital Converters / ADC Product Showcase - Automation.com

Analog to Digital Converters / ADC

March 07, 2019

ams introduces AS6500 time-to-digital converter (TDC)

TDCs from ams can measure time intervals as short as 5ns with 10ps precision. The AS6500 is based on the existing ams TDC-GPX2, and offers resolution up to 10ps on four channels and a sampling rate of up to 1.5Msamples/s.

Microchip Technology announces MCP331x1(D)-xx family of SAR ADCs with companion MCP6D11 differential amplifier
March 07, 2019

Microchip Technology announces MCP331x1(D)-xx family of SAR ADCs with companion MCP6D11 differential amplifier

The MCP331x1(D)-xx family ranges in resolution from 12-, 14- and 16-bit, with speed options ranging from 500 kilo samples per second (ksps) to 1 Msps, allowing developers to choose the right ADC for their designs..

Abaco announces FMC172 Wideband Low Latency FMC Module
February 01, 2019

Abaco announces FMC172 Wideband Low Latency FMC Module

Designed for customers developing embedded computing applications in electronic warfare, digital radar, wide band receivers and wireless communications SDR among others, it brings ADC and DAC functionality on a single card.

Microchip Technology announces ATtiny3217 and ATtiny3216 MCU devices
June 28, 2018

Microchip Technology announces ATtiny3217 and ATtiny3216 MCU devices

Suitable for sensor applications including capacitive touch interfaces, the ATtiny3217 and ATtiny3216 have two Analog-to-Digital Converters (ADCs) that enable systems to implement touch control simultaneously with other analog measurements.

Balluff releases RS232 to IO-Link converter module
June 22, 2018

Balluff releases RS232 to IO-Link converter module

The RS232 converter is designed for bi-directional communication, enabling communication over a variety of serial devices on the plant floor

Microchip Technology introduces PIC18 Q10 and ATtiny1607 families of microcontrollers
May 31, 2018

Microchip Technology introduces PIC18 Q10 and ATtiny1607 families of microcontrollers

Suitable for applications that use closed-loop control, the PIC18 Q10 and ATtiny1607 MCUs are the CIPs that independently manage tasks required from the CPU.

ABB introduces VD4 Digitup solution to digitize existing switchgear
April 24, 2018

ABB introduces VD4 Digitup solution to digitize existing switchgear

VD4 Digitup is accomplished by using vacuum VD4 breakers with onboard current and voltage sensors connected to Relion protection and control relays enabling IEC 61850 digital communication.

Korenix introduces JetCon 2301S media converter
February 08, 2018

Korenix introduces JetCon 2301S media converter

Korenix JetCon 2301S is a single port 10/100 TX to 100 FX media converter. It fulfills latency requirements with invariant forwarding latency from 64 to 1600 bytes. The Auto Link Loss Forwarding technology allows fault detection in a short time.

Siemens introduces Sinamics V20 I/O extension module
October 30, 2017

Siemens introduces Sinamics V20 I/O extension module

The Sinamics V20 I/O extension module is mounted on the converter using Plug & Play technology, and provides two additional input and output interfaces, each for 400 volts., designed to increase both the flexibility and the scope of the Sinamics V20.

July 07, 2017

ams releases AS5900 current-to-digital converter

The configurable design of the AS5900 gives it the flexibility required for integration into different types of end equipment that use a multiple-slice photodiode array. The chip is deisgned for use not only in medical equipment, but also in industrial and security CT scanners.

AMS/Acam introduces TDC-GPX2 time-to-digital converter
March 27, 2017

AMS/Acam introduces TDC-GPX2 time-to-digital converter

The device delivers up to 70 mega-samples per second – for drones, radar, LIDAR, PET scanner, automatic test equipment (ATE), photon counting and spectroscopy applications.