DC-DC Converters Product Showcase - Automation.com

DC-DC Converters

October 31, 2019

TRACO POWER announces TEN 40E and TEN 40WIE families of 40 watt DC/DC Converters

The primary difference between these two families of DC/DC converters is the TEN 40E has 2:1 input ranges of 9-18 / 18-36 / 36-75 VDC versus the TEN 40WIE series with 4:1 input ranges of 9-36 / 18-75 VDC.

Posted in:
Product Category: 
DC-DC Converters
Related Portals:
Electrical & Control Panels, Factory Automation
TRACO POWER releases TSR 0.6WI and TSR 1WI non-isolated point-of-load converters
September 27, 2019

TRACO POWER releases TSR 0.6WI and TSR 1WI non-isolated point-of-load converters

The 8:1 input range of 9-72 VDC make these a solution for designers to standardize on one converter to support multiple applications and bus voltages.

Posted in:
Product Category: 
DC-DC Converters
Related Portals:
Electrical & Control Panels, Factory Automation
TRACO POWER announces TEQ 40 Series DC/DC converters with dual outputs of ±12 / ±15 / ±24 VDC
September 04, 2019

TRACO POWER announces TEQ 40 Series DC/DC converters with dual outputs of ±12 / ±15 / ±24 VDC

The TEQ 40WIR are a series of isolated railway DC/DC-converter modules with 4:1 input voltage ranges. The series is comprised of 21 models offering 9.5-36 / 18-75 / 43-160 V input ranges and outputs of 5 / 12 / 15 / 24 / ±12 / ±15 / ±24 VDC.

Posted in:
Product Category: 
DC-DC Converters
Related Portals:
Electrical & Control Panels, Factory Automation
Phoenix Contact introduces QUINT DC/DC converters
August 28, 2019

Phoenix Contact introduces QUINT DC/DC converters

They can alter voltage levels, amplify voltage at the end of long cables, or enable the creation of independent supply systems by means of electrical isolation.

TRACO POWER releases TRI Series of DC/DC converters
August 20, 2019

TRACO POWER releases TRI Series of DC/DC converters

The 15 and 20 watt models feature 5,940 VDC I/O isolation / 8,000 VDC peak isolation up to one second in a 2.00 x 1.00” footprint. All models feature a 1,000 VAC working voltage and common mode transient immunity (dv/dt) of 15kV/μs.

Posted in:
Product Category: 
DC-DC Converters
Related Portals:
Electrical & Control Panels, Factory Automation
TRACO POWER introduces TEQ 20 Series of 20 watt railway / industrial DC/DC converters
August 02, 2019

TRACO POWER introduces TEQ 20 Series of 20 watt railway / industrial DC/DC converters

The series is comprised of 18 models offering 9-36 / 18-75 / 43-160 V input ranges and outputs of 5 / 12 / 15 / 24 / ±12 / ±15 VDC.

Posted in:
Product Category: 
DC-DC Converters
Related Portals:
Electrical & Control Panels, Factory Automation
TRACO POWER releases TEL10 series of 10W DC/DC converters
July 01, 2019

TRACO POWER releases TEL10 series of 10W DC/DC converters

The TEL10 series of 10 watt DC/DC converters in the DIP-16 package measure 0.94 x 0.54 x 0.31”, and the series is designed for 10 watt power density with 3.83 W/cm3.

TRACO POWER releases TBA family of 1 & 2 watt DC/DC converters
May 31, 2019

TRACO POWER releases TBA family of 1 & 2 watt DC/DC converters

Features include an integrated short-circuit protection circuit, I/O isolation and extended temperature range.

Posted in:
Product Category: 
DC-DC Converters
Related Portals:
Electrical & Control Panels, Factory Automation
Mitsubishi Electric Automation releases FR-XC Series Multi-functional Regenerative Converter
May 08, 2019

Mitsubishi Electric Automation releases FR-XC Series Multi-functional Regenerative Converter

Geared towards end users in crane and material handling applications, the regenerated energy from one VFD in a lift application is used by another VFD to drive other motors in the system.

TRACO POWER announces TMDC 06 and TMDC 10 series of Industrial DC/DC Converter modules
April 24, 2019

TRACO POWER announces TMDC 06 and TMDC 10 series of Industrial DC/DC Converter modules

These DC/DC Converter modules are fully encapsulated with terminal strip connections and equipped with integrated filters which limit conducted and radiated emissions (EN 55032 class A) and increase the modules EMC immunity (EN 55035) without the need for any external components.

Posted in:
Product Category: 
DC-DC Converters
Related Portals:
Electrical & Control Panels, Factory Automation
TRACO Power releases THN 15/20/30 WI series of 15, 20 and 30 Watt DC/DC converters
February 28, 2019

TRACO Power releases THN 15/20/30 WI series of 15, 20 and 30 Watt DC/DC converters

These 15 / 20 / 30 watt 5V out models with “-A1” suffix feature an extended trim range up to 6VDC. This makes these converters suitable for providing isolation and regulation for circuits in low-noise applications.

MicroPower Direct introduces ME300RU series of DC/DC converters
January 30, 2019

MicroPower Direct introduces ME300RU series of DC/DC converters

Standard features include an input/output isolation of 1,600 VDC, ±1% load regulation, continuous short circuit protection and a remote on/off control input. The MTBF of the ME300RU series (per MIL HDBK 217F) is over 900 khours.

Calex announces 48S14.250BC Bi-Directional DC/DC converter
August 30, 2018

Calex announces 48S14.250BC Bi-Directional DC/DC converter

The Bi-Directional DC/DC converter charges a low side (12V) battery during normal operation (buck mode) and charges or assists the high voltage (48V) battery in emergency situations (boost mode). It is packaged in an 9.45” x 5.366” x 0.725” mechanically enclosed package weighing 2.86 lbs.

Posted in:
TRACO POWER introduces TEL10WI series of 10 watt DC/DC converters
August 03, 2018

TRACO POWER introduces TEL10WI series of 10 watt DC/DC converters

hese DC/DC converters are enclosed in a 6-sided shielded metal case with an insulated base plate, an internal filter to meet EN 55032 class A conducted emissions or class B with external components and short circuit / overload protection circuits.

MINMAX releases MTQZ50 and  MTQZ75 DC-DC converter modules
July 24, 2018

MINMAX releases MTQZ50 and MTQZ75 DC-DC converter modules

The MTQZ50 and MTQZ75 DC-DC converter series, comprising of 8 models, integrate an I/O isolation of 3000VAC, offering input voltage ranges of 72 (43-101 VDC) and 110 (66-160VDC) with outputs of 5V, 12V, 15V, and 24V.

Posted in:
TRACO POWER announces THM 15 family of DC-DC converters
July 12, 2018

TRACO POWER announces THM 15 family of DC-DC converters

These 15 Watt DC-DC converters provide isolation of 5,000 VACrms (250 VACrms working voltage) with reinforced insulation and low leakage < 2.5uA. All models are certified to ANSI/AAMI ES 60601-1:2005/(R) 2012 3rd Edition for 2xMOPP compliance and are suitable for B & BF rated applications.

MINMAX releases MTQZ50 and the MTQZ75 DC-DC converter modules
July 11, 2018

MINMAX releases MTQZ50 and the MTQZ75 DC-DC converter modules

The MTQZ50 and MTQZ75 DC-DC converter series, comprising of 8 models, integrate an I/O isolation of 3000VAC, offering input voltage ranges of 72 (43-101 VDC) and 110 (66-160VDC) with outputs of 5V, 12V, 15V, and 24V.

TRACO POWER introduces TEC 3 series of DC-DC converters
June 22, 2018

TRACO POWER introduces TEC 3 series of DC-DC converters

The TEC 3 Series consists of 32 models offering inputs of 4.5~13.2 / 9~18 / 18~36 / 36~75 Vin and outputs of 3.3 / 5 / 9 / 12 / 15 / 24 / ±12 / ±15 Vout with efficiencies of 75-86%.

TRACO POWER introduces TIM 3.5 and TIM 3.5SM families of medical 3.5 Watt DC/DC converters
June 12, 2018

TRACO POWER introduces TIM 3.5 and TIM 3.5SM families of medical 3.5 Watt DC/DC converters

These converters are designed for healthcare products where small size and applied parts to patient (BF classification) is required.

Posted in:
Product Category: 
DC-DC Converters
Related Portals:
Electrical & Control Panels, Factory Automation
TRACO POWER releases THM 20 family of medical 20 Watt DC/DC converters
May 24, 2018

TRACO POWER releases THM 20 family of medical 20 Watt DC/DC converters

The THM 20 series are a solution not only for medical equipment but also for ITE applications such as transportation, control & measurement or IGBT drivers.