Instrumentation Amplifiers Product Showcase - Automation.com

Instrumentation Amplifiers

January 31, 2019

PI releases model E-619 piezo amplifier

Providing sink/source currents up to 10 amps and an output voltage swing of 160V-pp (-30V to +130V), the piezo driver delivers up to 1200 watts of peak power. A temperature sensor input provides overheating protection of piezo actuators.

Microchip Technology announces MCP6V51 zero-drift operational amplifier
January 15, 2019

Microchip Technology announces MCP6V51 zero-drift operational amplifier

The device provides precision measurement while minimizing the increasing influence of high-frequency interference by offering an operating range and on-chip electromagnetic interference (EMI) filters.

Aerotech introduces XL4s linear amplifier
January 09, 2019

Aerotech introduces XL4s linear amplifier

All parameters are software-settable including control-loop gains and system safety functions. With the XL4s, userscan achieve settling times, thermal stability, and sub-micron-level tracking accuracy with features such as full state feed-forward, 192 kHz servo rates, and look-ahead-based velocity control.

CC-Link Partner Association (CLPA) and Mitsubishi partner to embed CC-Link IE Field Safety features into the MR-J4-GF Servo Amplifiers
February 22, 2018

CC-Link Partner Association (CLPA) and Mitsubishi partner to embed CC-Link IE Field Safety features into the MR-J4-GF Servo Amplifiers

With the CC-Link IE Field Safety integration and the additional option card MR-D30 attached, the MR-J4-GF now meets international safety standards for Category 4 PLe SIL3.

Servo2Go introduces Advanced Motion Controls’ DigiFlex Performance CANopen servo amplifiers
December 05, 2017

Servo2Go introduces Advanced Motion Controls’ DigiFlex Performance CANopen servo amplifiers

The DigiFlex Performance panel and pcb mount servo drives offer full tuning control of all servo loops and are designed for distributed or centralized servo systems.

Posted in:
Interface Force Measurements announces ITA-1 analog strain gauge amplifier
July 25, 2017

Interface Force Measurements announces ITA-1 analog strain gauge amplifier

This product is used to convert a sensor’s millivolt signal into an analogue signal for display or data acquisition. This product is connected to the sensor in line via a 5-pin, M12 connector.

Northrup Grumman announces APN series of power amplifiers
June 27, 2017

Northrup Grumman announces APN series of power amplifiers

Northrop Grumman Corporation business, Microelectronics Products and Services (MPS), announced the availability of four new gallium nitride (GaN) power amplifiers, an upgraded amplifier, and two low noise amplifiers.