I/O Modules Product Showcase - Automation.com

I/O Modules

August 21, 2019

Mitsubishi Electric announces slice type I/O modules

Each slice offers a clip-in mounting system, while status LEDs help with visual diagnostics. It has a width of 11.5 mm, allowing for larger systems to be wired into a smaller panel, up to 64 modules can be connected per row.

Posted in:
Product Category: 
I/O Modules
Related Portals:
Sensors & Industrial I/O, Factory Automation
ADLINK Technology announces Express-SL2/KL2 module
August 19, 2019

ADLINK Technology announces Express-SL2/KL2 module

The Express-SL2/KL2 features the 6th/7th Gen Intel Core Processors (as well as Celeron and Xeon options) and supports the Type 2 pinout with legacy interfaces such as PCI-bus, PATA, and VGA.

SignalFire Wireless Telemetry introduces Mini Wireless I/O Module
August 14, 2019

SignalFire Wireless Telemetry introduces Mini Wireless I/O Module

This module integrates an antenna capable of a 3-mile range, which allows a pair of modules to communicate in a point-to-point mode or modules can communicate directly to a SignalFire Gateway.

Rockwell Automation introduces  Allen-Bradley ControlLogix CIP Safety I/O modules
July 30, 2019

Rockwell Automation introduces Allen-Bradley ControlLogix CIP Safety I/O modules

The modules provide local, in-chassis safety I/O for GuardLogix 5580 controllers, eliminating the need for adapters that require panel space and additional configuration time. If desired, the modules can also be used for distributed safety I/O.

AutomationDirect announces eight I/O expansion modules to BRX Micro PLC product line
June 25, 2019

AutomationDirect announces eight I/O expansion modules to BRX Micro PLC product line

Eight analog input and combination analog I/O modules are available. 16-channel current input (0-20 mA / 4-20 mA) and 16-channel voltage input (+/- 10VDC, +/- 5VDC, 0-5 VDC, 0-10 VDC) modules provide higher density analog I/O.

Rockwell Automation and Aparian introduce PMIO scanner
May 17, 2019

Rockwell Automation and Aparian introduce PMIO scanner

The I/O scanner acts as a direct communication interface between the Rockwell Automation controller and the Honeywell I/O network for complete connectivity, so users can use their existing I/O and field wiring.

Turck introduces FEN20-4IOL industrial Ethernet I/O module
April 24, 2019

Turck introduces FEN20-4IOL industrial Ethernet I/O module

The block offers four IO-Link channels. It is designed for a =range of industries, including manufacturing where space is at a premium, on robot end-effectors where small I/O is needed, and in automotive manufacturing and Tier 1 plants

Pepperl+Fuchs introduces reduction factor 1 sensors with IO-Link
April 05, 2019

Pepperl+Fuchs introduces reduction factor 1 sensors with IO-Link

The expanded portfolio of reduction factor 1 sensors is designed for flexibility in welding areas, for standard use, and for applications that require cleaning operations-with or without IO-Link

Balluff introduces Device Integration IO-Link masters
April 01, 2019

Balluff introduces Device Integration IO-Link masters

The Device Integration IO-Link masters — BNI00E1 (Ethernet/IP) and BNI00AZ (Profinet) — feature 4x Type A IO-Link ports and 4x Type B IO-Link ports, each with up to 2A of output per channel to meet a wider range of requirements.

Pentek introduces Jade Model 71810 Digital I/O XMC module
March 04, 2019

Pentek introduces Jade Model 71810 Digital I/O XMC module

When mounted on a compatible single board computer or other XMC carrier, the Model 71810 provides a customizable I/O signal status and control interface.

Molex introduces HarshIO industrial Ethernet I/O modules
December 06, 2018

Molex introduces HarshIO industrial Ethernet I/O modules

The modules feature a metallic plate for functional grounding; 4-pole and 5-pole power connector versions; Ultra-Lock M12 connectors; an IP67 seal; eight digital channels; four motor drive roller channels; diagnostic LEDs; three rotary switches; a two-port Ethernet switch; an Ethernet metallic plate to allow both ODVA and PI grounding strategies; and Ethernet fieldbus connectivity.

Beckhoff Automation announces three I/O modules for their TwinSAFE safety controllers
December 05, 2018

Beckhoff Automation announces three I/O modules for their TwinSAFE safety controllers

The three I/O modules can be used as controllers for the direct execution of customer-specific safety projects. A special feature is their communication capability.

Opto 22 releases GRV-CSERI-4 groov serial I/O module
October 04, 2018

Opto 22 releases GRV-CSERI-4 groov serial I/O module

This module plugs into a groov EPIC chassis alongside Opto 22’s groov Edge Programmable Industrial Controller (EPIC) and discrete and analog I/O modules, to provide the mix of analog, discrete, and serial signals at any location.

Posted in:
Pepperl+Fuchs releases RFID IO-Link read/write heads
September 27, 2018

Pepperl+Fuchs releases RFID IO-Link read/write heads

RFID IO-Link read/write heads operate in the HF range according to ISO 15693 and offer a read/write range of up to 13 cm.

Rockwell Automation releases Allen-Bradley FLEX 5000 I/O platform
June 29, 2018

Rockwell Automation releases Allen-Bradley FLEX 5000 I/O platform

The platform’s connectivity and bandwidth deliver data back to the controller. This helps future-proof control systems for a Connected Enterprise. It is built on a 1 Gigabit architecture with communications supporting Device Level Ring (DLR), linear and star topologies.

AutomationDirect introduces BRX Micro PLC I/O expansion modules
June 07, 2018

AutomationDirect introduces BRX Micro PLC I/O expansion modules

Three 32-point discrete I/O and five analog I/O expansion modules as well as three new temperature input modules have been added. Three 4-channel analog input and two 4-channel analog output modules are now available with current and voltage signal options.

AMCI announces plug-in PLC modules for GE PACSystems RX3i & RX7i controllers
May 07, 2018

AMCI announces plug-in PLC modules for GE PACSystems RX3i & RX7i controllers

AMCI’s PLC modules plug directly into the PACSystem RX3i or RX7i controller. These Specialty I/O modules are programmed using the PLC’s native software (most common being Proficy Machine Edition.

Posted in:
Turck introduces Backplane Ethernet Extension Protocol
February 16, 2018

Turck introduces Backplane Ethernet Extension Protocol

BEEP technology allows a network of up to 33 devices (one master + 32 slaves) or 480 bytes of data to appear to the PLC as a single device on a single connection using a single IP address.

Phoenix Contact releases Axioline F I/O modules with SafetyBridge Technology
December 12, 2017

Phoenix Contact releases Axioline F I/O modules with SafetyBridge Technology

SBT can operate as an upgrade to an existing line or a replacement for a fail-safe PLC on a new build. SBT is a solution independent of a particular control system and network.

Pepperl+Fuchs releases series of integrated Ethernet IO modules
November 08, 2017

Pepperl+Fuchs releases series of integrated Ethernet IO modules

The Ethernet IO modules from Pepperl+Fuchs support all common Ethernet protocols, such as PROFINET, EtherNet/IP, and EtherCAT, in a single device.