Remote Terminal Units / RTUs Product Showcase - Automation.com

Remote Terminal Units / RTUs

July 13, 2018

Beckhoff announces ELX Series of EtherCAT Terminals with TwinSAFE SC technology

With the aid of TwinSAFE SC technology, it is possible to make use of standard signals for safety-related tasks in any network or fieldbus system.

Siemens releases Simatic RTU3031C (Remote Terminal Unit/RTU) with integrated GPS functionality
July 05, 2018

Siemens releases Simatic RTU3031C (Remote Terminal Unit/RTU) with integrated GPS functionality

The Simatic RTU3000C telecontrol units are specially designed for energy-autonomous operation in environments without a power supply system. They can be supplied with power redundantly, for example with up to six battery modules or rechargeable battery with solar panel.

Beckhoff releases EL3783 EtherCAT Terminal for power monitoring
February 09, 2018

Beckhoff releases EL3783 EtherCAT Terminal for power monitoring

Three-phase AC voltage systems up to 690 V can be analyzed simultaneously on six channels and with 20 ksamples/s directly in the PLC. For each of the three phases, the EL3783 EtherCAT Terminal from Beckhoff samples voltages up to 400/690 Vrms and currents up to one or five Arms as instantaneous values with 16-bit resolution.

Red Lion Controls announces firmware 4.28 upgrade for RAM industrial routers and cellular RTUs
February 06, 2018

Red Lion Controls announces firmware 4.28 upgrade for RAM industrial routers and cellular RTUs

The upgrade features connectivity to Ignition by Inductive Automation, an industrial application platform for SCADA and IIoT solutions, via the industry-standard Sparkplug MQTT profile, as well as enhancements to RAMQTT, Red Lion’s MQTT client.

Yokogawa introduces Y-Flow family of computer and remote terminal unit (RTU)
October 18, 2017

Yokogawa introduces Y-Flow family of computer and remote terminal unit (RTU)

The Y-Flow YFFC is a computer designed to measure AGA 3 orifice gas flow and the Y-Flow YRTU is a remote terminal unit designed to measure various complex AGA gas flow calculations as well as remote control applications.

Honeywell introduces ControlEdge RTU with gas and liquid flow measurement
October 05, 2017

Honeywell introduces ControlEdge RTU with gas and liquid flow measurement

This latest release increases the efficiency of remote asset management by doubling as a flow meter, as well as allowing operators to automate loop check and commissioning, reduce hard-wired input/output (I/O) devices, and extend device diagnostics.

Red Lion announces Distrix SDN capability for Sixnet series RAM industrial cellular RTUs
May 23, 2017

Red Lion announces Distrix SDN capability for Sixnet series RAM industrial cellular RTUs

Distrix’s SDN technology, running on RAM devices, is designed to speed deployment of communication networks between industrial devices and IIoT cloud platforms, and deliver security for remote machine access.

Siemens releases Simatic RTU3010C & Simatic RTU3030C remote terminal units
May 01, 2017

Siemens releases Simatic RTU3010C & Simatic RTU3030C remote terminal units

These RTUs can be used for the implementation and monitoring of measurement points for important process data such as level, flow and fill level, as well as pressure and temperature, even for plants spread over a wide geographical area.

Posted in:
Siemens introduces TIM 1531 IRC communication module
April 27, 2017

Siemens introduces TIM 1531 IRC communication module

With its TIM 1531 IRC communication module, Siemens is extending its telecontrol product spectrum to include modular RTUs (Remote Terminal Units) on the basis of the Advanced Controller Simatic S7-1500

Red Lion introduces MQTT capabilities for RAM line of industrial RTUs
April 07, 2017

Red Lion introduces MQTT capabilities for RAM line of industrial RTUs

RAMQTT, Red Lion’s MQTT client, simplifies implementations with pre-configured profiles for AT&T M2X, Amazon AWS IoT, AutoDesk Fusion Connect and Telenor Connexion.