Safety Relays / Control Modules Product Showcase - Automation.com

Safety Relays / Control Modules

July 30, 2019

Rockwell Automation introduces Allen-Bradley ControlLogix CIP Safety I/O modules

The modules provide local, in-chassis safety I/O for GuardLogix 5580 controllers, eliminating the need for adapters that require panel space and additional configuration time. If desired, the modules can also be used for distributed safety I/O.

Schneider Electric announces Easergy P5 protection relay
April 05, 2019

Schneider Electric announces Easergy P5 protection relay

The Easergy P5 has been engineered to provide protection and control of critical assets. It unites a number of features together in a single device. Network operators get protection for applications, with arc-flash protection and full cybersecurity, reliability, and connectivity in a device.

AutomationDirect introduces Dold safety relays
April 03, 2019

AutomationDirect introduces Dold safety relays

These speed safety relays provide overspeed, under speed and/or standstill detection for single- or three-phase motors by monitoring either external proximity sensors mounted on a rotating element of the motor or load, the frequency of the motor power signal or the remanence voltage (back EMF) of the motor signal.

Larson Electronics releases EPCS-PBS-2PS.OF-PTM.PLG-24VAC explosion proof control station
August 23, 2018

Larson Electronics releases EPCS-PBS-2PS.OF-PTM.PLG-24VAC explosion proof control station

This hazardous location control station is constructed of sturdy aluminum with stainless steel parts for additional reliability. The station is NEMA 7 (C, D) and NEMA 9 (E, F, G) rated, and includes three pre-drilled and tapped operator holes with ¾-inch NPT hubs.

AAEON releases COM-APLC6 COM Express Type 6 module
July 03, 2018

AAEON releases COM-APLC6 COM Express Type 6 module

Powered by an Intel Atom E3900 Series processor, the COM-APLC6 is designed for modern IoT applications. The module features two SODIMM sockets that support DDR3L-ECC memory.

Pepperl+Fuchs releases KFD2-RSH safety relays
May 30, 2018

Pepperl+Fuchs releases KFD2-RSH safety relays

The KFD2-RSH safety relays from Pepperl+Fuchs combine a diagnostic function, line fault transparency, and dual redundancy in a 1oo3 (one out of three) architecture. During each switching operation, the function of the switching contacts is automatically checked.

KEB America releases Safety PLC, Safe I/O modules, and Safety PLC programming software
February 20, 2018

KEB America releases Safety PLC, Safe I/O modules, and Safety PLC programming software

Safety PLC, Safe I/O modules, and Safety PLC programming software are now available as part of a full system solution designed by KEB. All of the new safety products are TÜV Rheinland certified to IEC 61508 SIL3 and EN/ISO 13849-1 PL e.

ABB introduces safety CPU modules for AC500/AC500-S programmable logic controller (PLC)
January 22, 2018

ABB introduces safety CPU modules for AC500/AC500-S programmable logic controller (PLC)

The modules, when used with ABB’s AC500/AC500-S programmable logic controller (PLC), feature the ability to exchange process and safety data, not only from one controller to multiple devices but also from one device to multiple controllers, using PROFINET/PROFIsafeshared device functionality.

Magnescale announces MG70 series of PLC fieldbus interface modules
March 31, 2017

Magnescale announces MG70 series of PLC fieldbus interface modules

This series of PLC fieldbus interface modules allow Magnescale digital gauges to connect to EtherNet/IP and PROFINET RT enabled PLCs with 100Mbps data transfer speeds.