JAI adds three 1.6-megapixel 3-CMOS prism-based area scan cameras to Apex Series | Automation.com

JAI adds three 1.6-megapixel 3-CMOS prism-based area scan cameras to Apex Series

JAI adds three 1.6-megapixel 3-CMOS prism-based area scan cameras to Apex Series

April 26, 2018 – JAI has announced the launch of three 1.6-megapixel 3-CMOS industrial cameras in the company’s Apex Series of prism-based color area scan cameras. The Apex AP-1600T models join the 3.2-megapixel AP-3200T models launched earlier this month to create a new generation of prism-based industrial R-G-B area scan cameras.

The three AP-1600T cameras are: the AP-1600T-USB, with a USB3 Vision interface; the AP-1600T-PGE, with a GigE Vision interface; and the 1600T-PMCL with a dual Mini Camera Link interface. Each of the models features three Pregius IMX273 1/2.9-inch sensors with 1456 x 1088 pixels and pixel sizes of 3.45 µm x 3.45 µm.

All three models can be powered via a 12-pin Hirose connector that also provides various trigger and I/O connections. The AP-1600T-PGE and AP-1600T-PMCL models support power over their respective interfaces to minimize cabling.  

The AP-1600T-PMCL can output as much as 3 x 1.6 megapixels at 126 frames/second, which is nearly 5 times the throughput of earlier 3-CCD models. The AP-1600T-USB features a maximum full frame rate of 78.8 frames/second, while the AP-1600T-PGE runs at up to 24.2 frames/second over a single GigE Vision connection.

The Apex Series cameras are loaded with a range of features and functions supporting challenging color imaging applications. The color space conversion tool provides flexibility in on-board color space conversion: including RGB to HSI color space conversion and RGB to CIE-XYZ color space conversion. (sRGB and Adobe RGB  color spaces are also supported).

The gain (both analog and digital) and the exposure time can be set independently for the red, green and blue sensor channels allowing for better signal/noise conditions.

With the color enhancer tool it is possible to strengthen certain colors in the image (double emphasis) for additive hues (red, green and blue) and subtractive hues (cyan, magenta and yellow). This feature is particularly useful in certain applications such as microscopy and medical imaging.

Other features include multi-ROI support, edge enhancement, Auto Level Control (ALC) which integrates auto gain and auto shutter functions, color pixel binning, and chunk data.

The 3-CMOS Apex Series models utilize a prism design making them more than 50 percent smaller and nearly 50 percent lighter than JAI’s previous 3CCD models. The cameras are built with a 50G shock rating and 3G vibration rating which, combined with an operating temperature range of -5°C to +45°C (ambient), enables the AP-1600T cameras to operate reliably in a range of industrial environments.

MORE PRODUCTS

VIEW ALL

RELATED