Gearboxes / Gear Heads Product Showcase - Automation.com

Gearboxes / Gear Heads

June 17, 2019

Han’s Motion introduces HMHD-II Harmonic Gearing Reducer for robot and automation equipment applications

HMHD-II series Harmonic Gearing Reducer pursues the flat limit —Super Flat Hollow Shaft type— design. Compared with HMHS series, the axial length is only half.

GAM releases helical rack and pinion systems
May 22, 2019

GAM releases helical rack and pinion systems

Helical rack is available in 1-meter lengths in module 2, 3 or 4 and ISO quality 6 or 10. Precision pinions in ISO Q6, with low tooth counts, are designed specifically for GAM gearboxes.

ATLANTA Drive Systems introduces Z-Series, L-Series & I-Series of stainless steel washdown gearboxes
April 24, 2019

ATLANTA Drive Systems introduces Z-Series, L-Series & I-Series of stainless steel washdown gearboxes

The gearboxes are available inreduction ratios from 5:1 to 102:1, with output torque capacities up to 480 lb.ft. and input powers up to 5.4 hp. Stainless steel motors are also available for use with these gearboxes.

Servo2Go introduces SSP Series washdown servo gearboxes
April 22, 2019

Servo2Go introduces SSP Series washdown servo gearboxes

It is a precision inline planetary gearbox outwardly constructed of 300-series stainless steel. The motor adapter plate, housing and shaft are all stainless steel.

Nanotec introduces GP42 and GP56 planetary gearboxes
March 25, 2019

Nanotec introduces GP42 and GP56 planetary gearboxes

The GP56 gearbox can be combined with all brushless DC and stepper motors in sizes NEMA 23 and 24 (56/60 mm).

AutomationDirect announces 325 frame size IronHorse cast iron worm gearboxes
February 21, 2019

AutomationDirect announces 325 frame size IronHorse cast iron worm gearboxes

These 3.25” input to output shaft distance gearboxes areavailable in ratios of 10:1, 15:1, 20:1, 30:1, 40:1, & 60:1 with outputs in left hand shaft, right hand shaft, dual shaft, and hollow shaft.

GAM announces release of GCL cycloidal gearboxes
November 16, 2018

GAM announces release of GCL cycloidal gearboxes

The GCL is designed to withstand the frequent start-stop impact loads of industrial robots and other motion control applications with impact resistance five times nominal torque.

GAM releases GPL zero-backlash planetary gearboxes
August 29, 2018

GAM releases GPL zero-backlash planetary gearboxes

The GPL series is available in seven sizes with ratios from 36:1 to 200:1. Output options for the GPL series include a solid flanged output (GPL-F) and a hollow shaft flanged output (GPL-H).

Electromate releases GAM GPL-V (shaft) and GPL-H (hollow) planetary gearboxes
August 09, 2018

Electromate releases GAM GPL-V (shaft) and GPL-H (hollow) planetary gearboxes

The GPL-V (shaft) and GPL-H (hollow) have a backlash of ≤0.1 arc minute and are planetary gearboxes for horizontal and vertical robotic applications. Tilting rigidity results in positioning accuracy with a rated 20,000 hours.

Electromate announces Gam VP Series Performance Plus miniature spiral bevel gearboxes
July 20, 2018

Electromate announces Gam VP Series Performance Plus miniature spiral bevel gearboxes

The miniature VP Series is designed for miniature automation applications, such as medical and semiconductor. The housings are manufactured from aluminum.

GAM releases  EPR and PER Series of right angle bevel planetary gearboxes
July 02, 2018

GAM releases EPR and PER Series of right angle bevel planetary gearboxes

Featuring a spiral bevel gear input to an inline planetary gear output, the EPR and PER are available in ratios of 3:1 to 1000:1 and a wide range of sizes and configurations.

AutomationDirect introduces left-hand models to IronHorse worm gearbox line
March 14, 2018

AutomationDirect introduces left-hand models to IronHorse worm gearbox line

Constructed of cast iron one-piece housings, the worm gearboxes feature a C-flange input. Designed to change drive direction by 90 degrees and to increase torque output, worm gearboxes are used when space is at a premium, such as for conveyors, or mechanical design.

AutomationDirect introduces IronHorse Shaft Mount Gearboxes
July 13, 2017

AutomationDirect introduces IronHorse Shaft Mount Gearboxes

Shaft mount gearboxes dimensional drop-in for all major motor makes and are used for reducing output speed, increasing torque, changing drive direction, and/or running two loads from one motor in applications such as belt conveyors, screw conveyors, or material handling.

Electromate introduces Harmonic Drive CSF-2UP mini gearheads
March 20, 2017

Electromate introduces Harmonic Drive CSF-2UP mini gearheads

CSF-2UP Mini Gearheads from Harmonic Drive are ideally suited for small robots or equipment that require an ultra-compact solution.

Posted in:
Product Category: 
Gearboxes / Gear Heads
Related Portals:
Robots & Robot Controllers
Miki Pulley introduces CYT micro clutches
February 27, 2017

Miki Pulley introduces CYT micro clutches

These CYT Clutches are designed for compact precision applications and may be mounted to a driven shaft. Further custom variants can be realized by pairing a sprocket, timing pulley, V-belt pulley or shaft to the armature.

Neugart introduces WPLFE gearbox
November 28, 2016

Neugart introduces WPLFE gearbox

The WPLFE gearbox is designed for applications with tight space constraints and powerful torque requirements.

Posted in:
Harmonic Drive UK announces CSF-2UP gearbox range
September 06, 2016

Harmonic Drive UK announces CSF-2UP gearbox range

The CSF-2UP gearbox is designed for use in high precision positioning tasks in applications with limited space, such as jointed arm robots, measuring instruments and various uses in the growing medical technology market.

Posted in:
Harmonic Drive UK announces IridiumLine series of hollow-shaft gears
July 27, 2016

Harmonic Drive UK announces IridiumLine series of hollow-shaft gears

IridiumLine gears are available in sizes 14 to 58 with gear reductions between 30:1 and 460:1. Lengths range from 19-61mm and external diameters between 50-195mm.

Posted in:
Product Category: 
Gearboxes / Gear Heads
Related Portals:
Machine Tools, CNC & DNC
Servo2Go announces SPH flange gearbox
July 11, 2016

Servo2Go announces SPH flange gearbox

GAM’s SPH Flange Gearbox has a single piece steel housing and ring gear machined directly inside for maximum stiffness.

NUM jointly develops CNC gear hobbing machine with Feng Chia University
July 05, 2016

NUM jointly develops CNC gear hobbing machine with Feng Chia University

Development of the machine began in 2014, under the initiative of Professor Ruihong Xu, who works for the Bachelor’s Program in Precision System Design at the College of Engineering in Feng Chia University.